A harmonised microbiological survey was performed in two artisanal factories of raw goat milk cheeses (A and B) located in the Andalusian region (Spain). A total of 165 different control points or samples (raw materials, final products, food-contact surfaces [FCS], and air) were examined as microbial and pathogen sources of contamination of artisanal goat raw milk cheeses. For raw milk samples analysed from both producers, the concentrations of aerobic-mesophilic bacteria (AMB), total coliforms, coagulase-positive Staphylococcus spp. (CPS), lactic-acid bacteria (LAB) and moulds and yeasts ranged between 3.48 and 8.59, 2.45-5.48, 3.42-4.81, 4.99-8.59 and 3.35-6.85 log cfu/mL respectively. For the same microbial groups, the analysis of raw milk cheeses revealed concentrations ranging from 7.82 to 8.88, 2.00-6.82, 2.00-5.28, 8.11-9.57 and 2.00-5.76 log cfu/g, respectively. Although the raw material analysed from producer A presented higher microbial loads and between-batch variability, it was B the producer with the most loaded final products. Regarding the microbial air quality, the fermentation area, storage room, milk reception and packaging room were the most AMB loaded places, while the ripening chamber was the area with higher fungal loads in bioareosol from both producers. Conveyor belts, cutting machine, storage boxes and brine tank were highlighted as the most contaminated FCS evaluated. Staphylococcus aureus was the only pathogen detected within the set of 51 isolates from samples as revealed by MALDI-TOF and molecular PCR, with a prevalence of 12.5% for samples from the producer B. The public health risk attributed to the consumption of artisanal goat cheese should not be neglected, and may consider the whole cheesemaking processing chain, from microbiological quality of raw milk to the ready-to-eat final product, especially concerning the presence of S. aureus.

Biopreservation strategies such as the use of Mediterranean plant extracts to ensure food safety are promising to deal with the emergence of antimicrobial resistances and the overreliance on food chemical additives. In the last few decades, antimicrobial susceptibility testing (AST) for evaluating the in vitro antibacterial potential of plant extracts against the most relevant foodborne pathogens has been widely reported in the literature. The current meta-analysis aimed to summarise and analyse the extensive evidence available in the literature regarding the in vitro antimicrobial capability of Allium, Ocimum and Thymus spp. extracts against foodborne pathogens. A systematic review was carried out to gather data on AST results of these extracts against Listeria monocytogenes, Staphylococcus aureus, Salmonella spp., Escherichia coli and Bacillus cereus, including inhibition diameters (ID) and minimum inhibitory concentrations (MIC). A total of 742 records were gathered from a raw collection of 2,065 articles. Weighted mixed-effect linear models were adjusted to data to obtain pooled ID, pooled MIC and the relationship between both model estimations and observations. The pooled results revealed B. cereus as the most susceptible bacteria to Allium sativum (pooled ID = 20.64 ± 0.61 mm) by diffusion methods and S. aureus (pooled MIC = 0.146 mg/mL) by dilution methods. Diffusion methods did not yield conclusive results for Ocimum spp. extracts; however, the lowest pooled MIC was obtained for S. aureus (0.263 mg/mL). Among the foodborne pathogens evaluated, B. cereus showed the highest sensitivity to Thymus spp. extracts by both diffusion and dilution methods (pooled ID = 28.90 ± 2.34 mm and MIC = 0.075 mg/mL). The methodology used for plant extraction was found to not significantly affect MIC values (p > 0.05). Overall, the antimicrobial effectiveness of the studied extracts against Gram-positive and Gram-negative bacteria was demonstrated. Finally, the robustness of the meta-regression model was confirmed, also revealing an inversely proportional correlation between the ID and MIC measurements (p < 0.0001). These results provide a robust scientific basis on the factors affecting the in vitro antimicrobial efficacy of extracts from Mediterranean plants. They also provide valuable information for stakeholders involved in their industrial application in food, including producers, regulatory agencies and consumers which demand green-labelled foods.

The physicochemical and microbiological properties of traditional Portuguese ready-to-eat dry fermented sausage chouriça de carne samples from 14 regional producers were analysed and subjected to multivariate analysis to determine the relationships between them and to evaluate how the quality and safety of these sausages is affected by these properties. Producer-mean values for physicochemical analyses were quite variable, with intervals of 4.87–6.11 for pH, 0.803–0.965 for a_w, moisture 19.5–48.5%, protein 32.0–60.1% (db), fat 22.0–53.3% (db), ash 3.52–9.69% (db), and carbohydrates 1.66–13.5% (db). Mesophilic counts varied (5.61–8.68 log CFU/g), while lactic acid bacteria were generally high (MRS: 8.21–10.2; M17: 7.66–10.0 log CFU/g). S. aureus was enumerated in levels up to 2.55 log CFU/g, while presumptive C. perfringens never surpassed 2 log CFU/g. Salmonella spp. and Listeria spp. were also detected in the samples tested. Principal component (PC) analysis yielded a three-dimension solution that explained 60% of the data variation; PC1 (26%) characterized chorizo formulations with more meat, while PC2 (19.3%) described sausages with longer/rapid fermentation, and PC3 (14.5%) highlighted chouriços with poorer hygiene. Cluster analysis identified three quality groups: (i) chorizos with high moisture, high protein content, and lowest pH; (ii) sausages with low moisture, high fat content, and elevated pH; and (iii) chouriças with high moisture and high protein but lower fat contents, low pH, and improved hygiene. Lastly, factor analysis yielded a varimax-rotated three-factor solution that explained 65% of the data, with similar results to PCA; factor 1 (23.5%) depicted chorizos with low pH but high moisture, factor 2 (20.8%) described sausages with more meat in the formulation, and factor 3 (20.6%) longer or rapid fermentation. Overall, the results evidenced the great variability in the quality attributes of Portuguese chorizo sausages, very likely to arise from multiple recipes, ingredients, and manufacturing practices. The definition of quality clusters is expected to play a crucial role for the self-denominated “artisanal” food companies to benchmark their chouriço sausages against the proper artisanal quality group.

Artisanal fermented products constitute a worthwhile source of autochthonous lactic acid bacteria (LAB) with biopreservative, technological and organoleptic potential. This study aimed to characterize the fate of autochthonous LAB in artisanal goat’s raw milk fresh cheeses at different temperatures by using an omnibus (one-step) modeling strategy. Lab-scale cheese prototypes (10 g) were artisanally elaborated from goat’s raw milk and stored at 4, 12, 18 and 25 °C. LAB were enumerated (ISO:15214) during cheeses shelf-life. Growth models were fitted to the data, producing maximum growth rates averaging 0.345 ± 0.162 and 3.338 ± 0.907 ln CFU/g/d at 4 and 25 °C, respectively, and population increases averaged 3.388 ± 0.203 and 7.877 ± 1.480 ln CFU/g. The omnibus modeling approach allowed for the definition of a general model that describes autochthonous LAB growth with a correlation coefficient of 0.991 between experimental and estimated data. These results contribute to the better understanding of autochthonous LAB in artisanal cheeses for their further use as potential new-generation biopreservatives.