Laser power transmission (LPT) is one of the most promising technology in the long-rang wireless power transfer field. LPT research has been driven by the desire to remotely power unmanned aerial vehicles (UAVs), satellites and other mobile electric facilities. However, the low overall efficiency is the main issue that limits the implement of high intensity laser power beam (HILPB) system. As seen from the contemporary understanding of efficiency of laser power transmission channel, the efficiencies of laser and PV array are the main limiting factors to the HILPB system from the perspective of power conversion. Thus, a comprehensive overview of LPB techniques is presented from the point of efficiency optimization view in this paper. First, the basic principles of laser power transmission are briefly summarized. Then, a survey of the efficiency optimization methods for HILPB system with regard to the laser and PV technologies is provided in detail. Additionally, the open issues and challenges in implementing the LPT technology are discussed.
8 November 2019 in IEEE Transactions on Power Electronics
Paralleling silicon carbide (SiC) MOSFETs is a cost-effective solution for increasing pulse current rating. However, the device mismatch and asymmetrical circuit layout would lead to imbalance current of the paralleled SiC MOSFETs. In this letter, we propose a passive approach that a coupled inductor instead of the conventional resonant inductor, which is used for a resonant pulsed power converter. The coupled inductor enables even current sharing of the parallel SiC MOSFETs, and also helps with pulse width adjustment, which leads to a simplified system without complex control circuit compared with in the active solution. The configuration of the proposed topology, operating principle, imbalance current limitation mechanism, and design guidelines are fully discussed and presented. Additionally, experiments are carried out to verify the analysis and effectiveness of the proposed solution. The proposed method can be extended to the scenario with more than two parallel SiC MOSFETs.
3 September 2020 in IEEE Transactions on Transportation Electrification
DC-link capacitors are one kind of reliability-critical component in traction inverters. As such, it is essential to evaluate the degradation characteristics of dc-link capacitors. Accelerated life testing is an effective and standard method to evaluate the capacitors' lifetime and degradation mechanisms. Therefore, an accelerated life testing method for dc-link capacitors in three-phase inverter applications is proposed in this article. In order to reproduce the same encountered stress, exactly reflecting the real condition for the capacitor under test, a three-phase inverter with the capacitor under test and a three-phase balanced inductor load are used as the evaluation circuit. Due to the employment of the inductor load, the power consumption of the inverter can be reduced, while the full-scale current rating can be maintained so that the capacitor under test is subjected to the practical ripple current stress. In order to estimate a capacitor's capacitance with high accuracy, an effective and direct condition monitoring method, which is based on the proposed evaluation circuit, is also proposed in this article. By injecting an ac voltage into the dc link, the ac current and voltage components in the dc-link capacitor are generated. Then, the capacitance mathematical model can be developed by analyzing the injected voltage component and the resultant current component. As the proposed method only requires estimating the parameters from the input voltage and current, there is no need to install additional capacitor current sensors, which are usually difficult to install. Moreover, the amount of monitored and processed data can be reduced. Thus, the proposed method is easy to implement for accelerated life testing in practice. In addition, experiments are carried out to verify the analysis and effectiveness of the proposed solution.
1 June 2021 in IEEE Transactions on Power Electronics
In this paper, a sensorless current balance method for a multiple phase interleaved boost converter is proposed. Balanced current can help an interleaved boost converter prevent imbalanced heat distribution and inductor saturation, as well as improve the output voltage performance and overall system efficiency. This paper analyzes the relationship equations between the periodic output voltage ripple and the phase current balance status. In the proposed method, the current sensor is eliminated, and only one voltage sensor on the output capacitor side is needed to monitor the output voltage information. The proposed current sensorless control method estimates the phase current distribution status according to the periodic output voltage peak ripple value and adjusts the phase current distribution status by changing the gate drive signal duty cycle of each phase MOSFET. To validate the proposed method, a PSIM simulation model and a two-phase interleaved boost converter test bench are set up, and the experiment waveforms verify the effectiveness of the proposed method.
2 July 2020 in IEEE Transactions on Transportation Electrification
Highly accelerated life testing (HALT) is one of the most popular step-stress testing methodologies for identifying the weaknesses and increasing product reliability in a fast and cost-efficient way. The traction inverter plays a critical role in EV/HEV power train systems, and the requirements on its reliability at the harsh environment operation are becoming more demanding. In this paper, to evaluate the weak links and various components performance, and ascertain the effect of high temperature on the traction inverter, the traction inverter HALT was carried out with high-temperature stress between 190°C -220°C taking the IGBT on-die temperature as the benchmark. Nine traction inverters were tested, which were divided into four groups with respect to the designed step-stress test profile. The changes in electrical and thermal indicators were observed online using the proposed monitoring system. At the end of each test, the effects of different conditions on the overall testing time, failure modes, and damage were examined, and the damages were listed systematically and discussed. Further, the characteristics of the DC-link capacitor at different temperatures and the related degradation were observed online. The results show that the inverter can operate hundreds of hours with the IGBT on-die temperature of 200°C, and the gate driver board chip of 127°C. The findings in this study could help to the improvement design of the traction inverter, as well as to keep the design life prediction never be overestimated.1.
3 March 2022 in IEEE Transactions on Power Electronics
The laser power transfer system is one of the most promising systems in the long-range wireless power transfer field. However, the low efficiency at photovoltaic (PV) receiver limits the performance of an implemented system due to the Gaussian laser beam. Since the irradiance profile of the Gaussian laser beam is not uniform, the PV array exhibits complex output characteristics with multiple peaks, leading that the conventional maximum power point tracking (MPPT) method is not acceptable either on tracking accuracy or on tracking speed. In this article, a simple and rapid voltage-location global MPPT (VL-GMPPT) method is proposed for PV array under Gaussian laser beam condition (GLBC) in terms of reducing the voltage searching range. In order to do so, the mathematical model of PV array's global maximum power point (GMPP) is developed under GLBC. Then, the VL-GMPPT method incorporates voltage-location mechanism to directly move the operating point to the vicinity of GMPP and employs IncCond method to accurately find the GMPP. The experimental and simulation results are shown to verify the proposed GMPPT method. It was found that the proposed method can reduce 90% of tracking time that is consumed by the conventional global searching method.