In this paper, we demonstrate a novel all-fiber current sensor using ordinary silica fiber. The sensor employs a fiber solenoid as a current sensor head, which improves the current sensitivity by allowing optical signals to traverse the sensor head repeatedly. Theory and experiment prove that the improvement in sensitivity increases periodically with the number of repetitions of optical signals circulating round the loop.
We present the general coherence theory for laser beams passing through a moving diffuser. The temporal coherence of laser beams passing through a moving diffuser depends on two characteristic temporal scales: the laser coherence time and the mean time it takes the diffuser to move past a phase correlation area. In most applications, the former is much shorter than the latter. Our theoretical analysis shows the spatial coherence area of light scattered from a moving diffuser decreases while the coherence time remains unchanged. The conclusion has been confirmed by experiments using a Michelson interferometer and it is not in accordance with the original coherence theory in which both the temporal and spatial coherence of light scattered by a moving diffuser decrease. We also developed a method based on the theory of eigenvalues to calculate the speckle contrast on a screen illuminated by light transmitted through a moving diffuser.
A multichannel-fiber ringdown sensor based on the principle of time-division multiplexing is described. The purpose of multiplexing is to obtain the information of one or more fiber ringdown sensor heads simultaneously under the premise of cost neutrality. To illustrate the principle, we study the typical dual-channel fiber ringdown force sensor in our experiment. It shows that the pressures at two different points can be measured simultaneously. In addition, we find by measurement that our sensors have good linear responses above the response threshold of the applied force.
18 May 2010 in Microwave and Optical Technology Letters
Demodulation is a bottleneck for applications involving fiber Bragg gratings (FBGs). An overlap spectrum FBG sensor based on a light power demodulation method is presented in this paper. The demodulation method uses two chirp FBGs (cFBGs) of which the reflection spectra partially overlap each other. The light power variation of the overlap spectrum can be linked to changes in the measurand, and the sensor function can be realized via this relationship. A temperature experiment showed that the relationship between the overlap power spectrum of the FBG sensor and temperature had good linearity and agreed with the theoretical analysis.
Low current sensitivity and insufficient system stability are two key problems in all-fiber current sensor (AFCS) studies. In order to solve the two problems, a novel AFCS combining single-polarization single-mode (SPSM) couplers and a loop structure is presented in this paper with a design that incorporates the advantages of both SPSM couplers and a loop structure. SPSM couplers are shown to simplify the AFCS system and reduce the risk of interference, and the loop structure can enhance the current sensitivity. Both theory and experiment prove that the new AFCS can simultaneously overcome two prevalent obstacles of low current sensitivity and low stability.