We report the electron transport and hole-blocking properties of ytterbium, which make it suitable for use as the cathode interlayer for the poly(3-hexylthiophene-2,5-diyl) (P3HT):phenyl-C61-butyric acid methyl ester (PCBM) bulk heterojunction in organic photodetectors (OPDs). The final device structure consisting of ITO/NiOx/P3HT:PC60BM/Yb/Al is compared to devices with Ca as the cathode interlayer and without a cathode interlayer. The performance of OPDs is analyzed, and effective carrier extraction and hole blocking are confirmed through the dynamic characteristics of the devices. The use of a Yb layer in the OPDs improves the resistance, thereby improving the carrier extraction and decreasing the leakage current significantly. A figure of merit for the dynamic characteristics, namely the bandwidth of Yb, is improved owing to the fast response time. The bandwidth exceeds 100 kHz at a relatively low light intensity. Optical–electrical measurements are performed, and J–V characteristics, impedance, and dynamic characteristics are analyzed. We investigate the effects of the Yb layer on the performance of the OPDs, focusing on its carrier extraction, leakage current, and resistance components.
A moleculear photodiode was fabricated with the hetero-Langmuir-Blodgett(LB) film consisting of an electron acceptor(A), an electron relay(R) and a sensitizer(S). TCNQ, viologen and flavin derivatives were used as A, R and S units, respectively. By aligning hetero-LB film of A/R/S units on ITO glass with an aluminum thin film, a molecular photodiode with the structure of Metal/Insulator/Metal(MIM) was constructed. Due to excitation by irradiation with a 460 nm monochromatic light source, the photo-induced unidirectional flow of electrons in the MIM device could be achieved and was detected as photocurrents. The direction of energy flow was in accordance with the energy level profile across the LB films. The photoswitching function was achieved and the rectifying characteristic was observed in the molecular device.
A low leakage current is critical for achieving organic photodetectors (OPDs) with high detectivity. The insertion of buffer layers is an effective approach for reducing the reverse-biased leakage current. In this study, polyelectrolyte multilayers comprising polyethyleneimine (PEI) and polyacrylic acid (PAA) were introduced by a spin-assisted layer-by-layer technique into an OPD as a p-type buffer layer. Although PEI/PAA multilayers are insulators, when used as a buffer layer in our device, they suppressed the leakage current and also provided a high photocurrent due to the light-assisted tunneling effect. The prepared device configuration was ITO/(PEI/PAA)2/P3HT:PC60BM/Yb/Al. The performances of the OPDs were investigated by measuring the current–voltage characteristics, external quantum efficiency, and transient photocurrent. In addition, the operating mechanism of the OPDs was confirmed by impedance analysis. The device comprising (PEI/PAA)2 showed a specific detectivity of 3.11 × 1012 Jones and a bandwidth of 103.2 kHz at −1 V and 525 nm. This performance is a numerical value that can be used in devices such as a line scan camera. In addition, because this device is fabricated by a low-temperature solution process, flexible and large-area substrates can be used.