In large-scale remote sensing scenarios characterized by intricate terrain, the straightforward road imaging features in synthetic aperture radar (SAR) images make them susceptible to interference from other elements such as ridges, compromising the robustness of conventional SAR image road extraction methods. This paper introduces a method that integrates Gaofen-3 (GF-3) with a resolution of 3.0 m, Digital Elevation Models (DEMs), and Gaofen-2 (GF-2) remote sensing image data with a resolution of 4.0 m, aiming to improve the performance of road extraction in complex terrain. Leveraging DEMs, this study addresses the limitations in feature-based SAR algorithms, extending their application to complex remote sensing scenarios. Decision-level fusion, integrating SAR and multispectral images, further refines road extraction precision. To overcome issues related to terrain interference, including fragmented road segments, an adaptive rotated median filter and graph-theory-based optimization are introduced. These advancements collectively enhance road recognition accuracy and topological precision. The experimental results validate the effectiveness of the multi-source remote sensing image fusion and optimization methods. Compared to road extraction from multispectral images, the F1-score of the proposed method on the test images increased by 2.18%, 4.22%, and 1.4%, respectively.

The block adjustment method can correct systematic errors in the bistatic Synthetic Aperture Radar Interferometry (InSAR) satellite system and effectively improve the accuracy of the InSAR-generated Digital Elevation Model (DEM). Presently, non-parametric methods, which use the polynomial to model the systematic errors of InSAR-generated DEMs, are most frequently used in spaceborne InSAR-DEM adjustment. However, non-parametric methods are not directly related to the physical parameters in the InSAR imaging process. Given the issue, this paper conducts adjustments in the parameter domain and proposes a three-dimensional block adjustment method for spaceborne bistatic InSAR systems based on the Range-Doppler-Phase (RDP) model. First, we theoretically analyze the sensitivities of spatial baseline, azimuth time, and slant range to the RDP geolocation model and confirm the analysis method with a simulated geolocation result. Second, we use total differential and differential geometry theories to derive adjustment equations of available control data based on sensitivity analysis. Third, we put forward an iterative solution strategy to solve the corrections of parallel baseline, azimuth time, and slant range to improve the plane and elevation accuracies of InSAR-generated DEMs. We used 29 scenes of TanDEM-X Co-registered Single look Slant range Complex (CoSSC) data to conduct simulated and real data experiments. The simulated results show that the proposed method can improve the accuracies of baseline, range, and timing to 0.05 mm, 0.1 m, and 0.006 ms, respectively. In the real data experiment, the proposed method improves the plane and elevation accuracies to 4.14 m and 1.34 m, respectively, and effectively suppresses the fracture phenomenon in the DEM mosaic area.

The interferometric synthetic aperture radar (InSAR) technique is widely utilized to measure ground-surface displacement. One of the main limitations of the measurements is the atmospheric phase delay effects. For satellites with shorter wavelengths, the atmospheric delay mainly consists of the tropospheric delay influenced by temperature, pressure, and water vapor. Tropospheric delay can be calculated using numerical weather prediction (NWP) model at the same moment as synthetic aperture radar (SAR) acquisition. Scientific researchers mainly use ensemble forecasting to produce better forecasts and analyze the uncertainties caused by physic parameterizations. In this study, we simulated the relevant meteorological parameters using the ensemble scheme of the stochastic physic perturbation tendency (SPPT) based on the weather research forecasting (WRF) model, which is one of the most broadly used NWP models. We selected an area in Foshan, Guangdong Province, in the southeast of China, and calculated the corresponding atmospheric delay. InSAR images were computed through data from the Sentinel-1A satellite and mitigated by the ensemble mean of the WRF-SPPT results. The WRF-SPPT method improves the mitigating effect more than WRF simulation without ensemble forecasting. The atmospherically corrected InSAR phases were used in the stacking process to estimate the linear deformation rate in the experimental area. The root mean square errors (RMSE) of the deformation rate without correction, with WRF-only correction, and with WRF-SPPT correction were calculated, indicating that ensemble forecasting can significantly reduce the atmospheric delay in stacking. In addition, the ensemble forecasting based on a combination of initial uncertainties and stochastic physic perturbation tendencies showed better correction performance compared with the ensemble forecasting generated by a set of perturbed initial conditions without considering the model’s uncertainties.

High-resolution remote sensing imagery (HRRSI) presents significant challenges for building extraction tasks due to its complex terrain structures, multi-scale features, and rich spectral and geometric information. Traditional methods often face limitations in effectively integrating multi-scale features while maintaining a balance between detailed and global semantic information. To address these challenges, this paper proposes an innovative deep learning network, Multi-Source Multi-Scale Residual Attention Network (MMRAD-Net). This model is built upon the classical encoder–decoder framework and introduces two key components: the GCN OA-SWinT Dense Module (GSTDM) and the Res DualAttention Dense Fusion Block (R-DDFB). Additionally, it incorporates Digital Surface Model (DSM) data, presenting a novel feature extraction and fusion strategy. Specifically, the model enhances building extraction accuracy and robustness through hierarchical feature modeling and a refined cross-scale fusion mechanism, while effectively preserving both detail information and global semantic relationships. Furthermore, we propose a Hybrid Loss, which combines Binary Cross-Entropy Loss (BCE Loss), Dice Loss, and an edge-sensitive term to further improve the precision of building edges and foreground reconstruction capabilities. Experiments conducted on the GF-7 and WHU datasets validate the performance of MMRAD-Net, demonstrating its superiority over traditional methods in boundary handling, detail recovery, and adaptability to complex scenes. On the GF-7 Dataset, MMRAD-Net achieved an F1-score of 91.12% and an IoU of 83.01%. On the WHU Building Dataset, the F1-score and IoU were 94.04% and 88.99%, respectively. Ablation studies and transfer learning experiments further confirm the rationality of the model design and its strong generalization ability. These results highlight that innovations in multi-source data fusion, multi-scale feature modeling, and detailed feature fusion mechanisms have enhanced the accuracy and robustness of building extraction.

The lack and uneven distribution of Ground Control Points (GCPs) will lead to the deterioration of Digital Elevation Model (DEM) block adjustment results in the bistatic Interferometric Synthetic Aperture Radar (InSAR) system. Given this issue, we first explain the relationship between the stability of adjustment parameters and the GCP distribution pattern theoretically using matrix perturbation theory. Second, we put forward the Constraint Slices (CSs) concept and first introduce CSs into the adjustment optimization model as constraint conditions rather than actual values as GCPs. Finally, we propose a novel DEM block adjustment method for spaceborne InSAR using CSs based on an optimization model with nonlinear constraints. The simulated experiment shows the instability of the conventional method and validates the proposed method under different parallel baseline errors. Four groups of real experiments were carried out according to the size of the uncontrolled area using twelve Co-registered Single-look Slant–range Complex (CoSSC) datasets for Henan Province, China. The adjustment results verified by the ICESat-2 ATL08 data demonstrate that the performance of the proposed method is better than the conventional method in the uncontrolled area; the corresponding improvements in adjustment accuracies compared with the conventional method are 0.13 m, 1.02 m, 2.12 m, and 8.18 m, respectively. At the same time, the proposed method can enhance the height consistency in overlapping areas, which is vital for seamless DEM production.

In this paper, we introduce a refined three-stage inversion algorithm (TSIA) for forest height estimation using polarimetric interferometric synthetic aperture radar (PolInSAR). Specifically, the iterative extraction of the boundary of the coherence region (IEBCR) and iterative look-up table (ILUT) are proposed to improve the efficiency of traditional TSIA. A class of refined TSIA utilizes the boundary of the coherence region (BCR) to alleviate the underestimation phenomenon in forest height estimation. Given many eigendecompositions in the extraction of BCR (EBCR), we analyze the relationship of eigenvectors between the adjacent points on the BCR and propose the IEBCR utilizing the power methods. In the final inversion stage of TSIA, the look-up table (LUT) uses the exhaustive search method to minimize the loss function in the 2-D grid with defined step sizes and thus costs high computational complexity. To alleviate the deficiency, we define the random volume over ground (RVoG) function based on the RVoG model and prove its monotonicity and convergence from the analytical and numerical points of view. After analyzing the relationship between the RVoG function and the loss function, we propose the ILUT for the inversion stage. The simulation and experiments based on the BioSAR 2008 campaign data illustrate that the IEBCR and ILUT greatly improve the computational efficiency almost without compromising on accuracy.