Interferometric synthetic aperture radar (InSAR) products may be significantly distorted by microwave signals traveling through the ionosphere, especially with long wavelengths. The split-spectrum method (SSM) is used to separate the ionospheric and the nondispersive phase terms with lower and higher spectral sub-band interferogram images. However, the ionospheric path delay phase is very delicate to the synthetic aperture radar (SAR) parameters including orbit vectors, slant range, and target height. In this paper, we get the impact of SAR parameter errors on the ionospheric phase by two steps. The first step is getting the derivates of geolocation with reference to SAR parameters based on the range-Doppler (RD) imaging model and the second step is calculating the derivates of the ionospheric phase delay with respect to geometric positioning. Through the numerical simulation, we demonstrate that the deviation of ionospheric phase has a linear relationship with SAR parameter errors. The experimental results show that the estimation of SAR parameters should be accurate enough since the parameter errors significantly affect the performance of ionospheric correction. The root mean square error (RMSE) between the corrected differential interferometric SAR (DInSAR) phase with SAR parameter errors and the corrected DInSAR phase without parameter errors varies from centimeter to decimeter level with the L-band data acquired by the Advanced Land Observing Satellite (ALOS) Phased Array type L-band SAR (PALSAR) over Antofagasta, Chile. Furthermore, the effectiveness of SSM can be improved when SAR parameters are accurately estimated.

With the rapid development of microwave remote sensing and SAR satellite systems, the use of InSAR techniques has been greatly encouraged due to the abundance of SAR data with unprecedented temporal and spatial coverage. Small Baseline Subset (SBAS) is a promising time-series InSAR method for applications involving deformation monitoring of the Earth’s crust, and the sequential SBAS method is an extension of SBAS that allows long-term and large-scale surface displacements to be obtained with continuously auto-updating measurement results. As the Chinese LuTan-1 SAR system has begun acquiring massive SAR image data, the need for an efficient and lightweight InSAR processing platform has become urgent in various research fields. However, traditional sequential algorithms are incapable of meeting the huge challenges of low efficiency and frequent human interaction in large-scale InSAR data processing. Therefore, this study proposes a distributed parallel sequential SBAS (P2SBAS) processing chain based on Hadoop by effectively parallelizing and improving the current sequential SBAS method. P2SBAS mainly consists of two components: (1) a distributed SAR data storage platform based on HDFS, which supports efficient inter-node data transfer and continuous online data acquisition, and (2) several parallel InSAR processing algorithms based on the MapReduce model, including image registration, filtering, phase unwrapping, sequential SBAS processing, and so on. By leveraging the capabilities associated with the distributed nature of the Hadoop platform, these algorithms are able to efficiently utilize the segmentation strategy and perform careful boundary processing. These parallelized InSAR algorithm modules can achieve their goals on different nodes in the Hadoop distributed environment, thereby maximizing computing resources and improving the overall performance while comprehensively considering performance and precision. In addition, P2SBAS provides better computing and storage capabilities for small- and medium-sized teams compared to popular InSAR processing approaches based on cloud computing or supercomputing platforms, and it can be easily deployed on clusters thanks to the integration of various existing computing components. Finally, to demonstrate and evaluate the efficiency and accuracy of P2SBAS, we conducted comparative experiments on a set of 32 TerraSAR images of Beijing, China. The results demonstrate that P2SBAS can fully utilize various computing nodes to improve InSAR processing and can be applied well in large-scale LuTan-1 InSAR applications in the future.

Due to the complex marine environment and high-order frequency modulation (FM) on radar echo from the micromotion of the target, the effective and robust detection of a marine target with micromotion under heavy sea clutters’ background is a challenging task. In this article, we propose a novel detection and estimation algorithm based on adaptive sparse modified-Lv’s transform (ASMLVT). First, the micro-Doppler (m-D) characteristics of marine targets are employed and modeled as quadratic frequency-modulated (QFM) signals. Second, we modify the 2-D robust sparse Fourier transform (2-D-RSFT) and make it adaptive to the sea clutters’ background, namely, 2-D adaptive sparse Fourier transform (2-D-ASFT). Then, we substitute the 2-D Fast Fourier transform (2-D-FFT) operation with 2-D-ASFT in the modified-Lv’s transform (MLVT). The proposed algorithm can not only achieve good energy accumulation and accurate parametric estimation for marine targets with micromotion but is also robust to the heavy sea clutters and can greatly reduce false alarms. Besides, it has a good cross-term suppression ability to detect multitargets. Experiments with simulated and real radar datasets show that the proposed algorithm can effectively detect and estimate multitargets with micromotion under heavy sea clutter and low signal-to-clutter ratio (SCR) background.

Road detection from images has emerged as an important way to obtain road information, thereby gaining much attention in recent years. However, most existing methods only focus on extracting road information from single temporal intensity images, which may cause a decrease in image resolution due to the use of spatial filter methods to avoid coherent speckle noises. Some newly developed methods take into account the multi-temporal information in the preprocessing stage to filter the coherent speckle noise in the SAR imagery. They ignore the temporal characteristic of road objects such as the temporal consistency for the road objects in the multitemporal SAR images that cover the same area and are taken at adjacent times, causing the limitation in detection performance. In this paper, we propose a multiscale and multitemporal network (MSMTHRNet) for road detection from SAR imagery, which contains the temporal consistency enhancement module (TCEM) and multiscale fusion module (MSFM) that are based on attention mechanism. In particular, we propose the TCEM to make full use of multitemporal information, which contains temporal attention submodule that applies attention mechanism to capture temporal contextual information. We enforce temporal consistency constraint by the TCEM to obtain the enhanced feature representations of SAR imagery that help to distinguish the real roads. Since the width of roads are various, incorporating multiscale features is a promising way to improve the results of road detection. We propose the MSFM that applies learned weights to combine predictions of different scale features. Since there is no public dataset, we build a multitemporal road detection dataset to evaluate our methods. State-of-the-art semantic segmentation network HRNetV2 is used as a baseline method to compare with MSHRNet that only has MSFM and the MSMTHRNet. The MSHRNet(TAF) whose input is the SAR image after the temporal filter is adopted to compare with our proposed MSMTHRNet. On our test dataset, MSHRNet and MSMTHRNet improve over the HRNetV2 by $2.1\%$ and $14.19\%$, respectively, in the IoU metric and by $3.25\%$ and $17.08\%$, respectively, in the APLS metric. MSMTHRNet improves over the MSMTHRNet(TAF) by $8.23\%$ and $8.81\%$ in the IoU metric and APLS metric, respectively.

In this paper, we introduce a refined three-stage inversion algorithm (TSIA) for forest height estimation using polarimetric interferometric synthetic aperture radar (PolInSAR). Specifically, the iterative extraction of the boundary of the coherence region (IEBCR) and iterative look-up table (ILUT) are proposed to improve the efficiency of traditional TSIA. A class of refined TSIA utilizes the boundary of the coherence region (BCR) to alleviate the underestimation phenomenon in forest height estimation. Given many eigendecompositions in the extraction of BCR (EBCR), we analyze the relationship of eigenvectors between the adjacent points on the BCR and propose the IEBCR utilizing the power methods. In the final inversion stage of TSIA, the look-up table (LUT) uses the exhaustive search method to minimize the loss function in the 2-D grid with defined step sizes and thus costs high computational complexity. To alleviate the deficiency, we define the random volume over ground (RVoG) function based on the RVoG model and prove its monotonicity and convergence from the analytical and numerical points of view. After analyzing the relationship between the RVoG function and the loss function, we propose the ILUT for the inversion stage. The simulation and experiments based on the BioSAR 2008 campaign data illustrate that the IEBCR and ILUT greatly improve the computational efficiency almost without compromising on accuracy.

In recent decades, the interferometric synthetic aperture radar (InSAR) technique has emerged as a powerful tool for monitoring ground subsidence and geohazards. Various satellite SAR systems with different modes, such as Sentinel-1 and Lutan-1, have produced abundant SAR datasets with wide coverage and large historical archives, which have significantly influenced long-term deformation monitoring applications. However, large-scale InSAR data have posed significant challenges to conventional InSAR methods. These issues include the computational burden and storage of multi-temporal InSAR (MT-InSAR) methods, as well as temporal decorrelation for coherent scatterers with long temporal baselines. In this study, we propose a stepwise MT-InSAR with a temporal coherent scatterer method to address these problems. First, a batch sequential method is introduced in the algorithm by grouping the SAR dataset in the time domain based on the average coherence distribution and then applying permanent scatterer interferometry to each temporal subset. Second, a multi-layer network is employed to estimate deformation for partially coherent scatterers using small baseline subset interferograms, with permanent scatterer deformation parameters as the reference. Finally, the final deformation rate and displacement time series were obtained by incorporating all the temporal subsets. The proposed method efficiently generates high-density InSAR deformation measurements for long-time series analysis. The proposed method was validated using 9 years of Sentinel-1 data with 229 SAR images from Jakarta, Indonesia. The deformation results were compared with those of conventional methods and global navigation satellite system data to confirm the effectiveness of the proposed method.