In the present study, Fe₃O₄/poly(2-hydroxyethyl methacrylate-co-itaconic acid) magnetic hydrogels (MHGs) were prepared by in situ synthesis of Fe₃O₄ magnetic particles in hydrogels (HGs). The resulting magnetic hydrogels were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), a vibrating sample magnetometer (VSM), scanning electron microscopy (SEM), and N₂ adsorption–desorption. The effect of Fe₃O₄ on the swelling behavior and adsorption of methylene blue (MB) dye of the prepared hydrogel was studied. Parameters such as the dose, pH, contact time, and MB initial concentration were investigated. The results show that 75% (HG) and 91% (MHG) of MB (200 mg/L) were removed at doses of 2 mg/mL and 1 mg/mL, respectively, under a pH of 6.8 and a contact time of 10 min. The adsorption behavior followed the Langmuir isotherm model, indicating that the adsorption process takes place in monolayers and on homogeneous surfaces. The Langmuir capacities for MB adsorption using the HGs and MHGs were 78 and 174 mg/g, respectively. The adsorption kinetics followed a pseudo-second-order kinetic model. In addition, thermodynamic studies carried out show that the adsorption process is spontaneous and endothermic. Adsorption–desorption studies indicate that the magnetic hydrogel can remove MB for four cycles with removal efficiencies above 90%. Therefore, a MHG is suitable as an alternative material for MB adsorption.

An increase in the production of cationic dyes is expected over the next decade, which will have an impact on health and the environment. This work reports an adsorbent hydrogel composed of poly(acrylic acid) [poly(AA)] and Fe₃O₄ particles, prepared by radical polymerization and in situ co-precipitation of Fe³⁺ and Fe²⁺. This Fe₃O₄/poly(AA) composite hydrogel was used to evaluate its potential for removing the cationic dyes methylene blue (MB) and crystal violet (CV) from aqueous solutions. Instrumental characterization of the hydrogel was performed by FTIR, XRD, TGA, VSM, and physicochemical analysis (swelling and response to changes in pH). The results show that the incorporation of Fe₃O₄ particles improves the adsorption capacity of MB and CV dyes to a maximum adsorption of 571 and 321 mg/g, respectively, under the best conditions (pH 6.8, dose 1 g/L, time 24 h). The adsorption data best fit the pseudo-first order (PFO) kinetic model and the Freundlich isothermal model, indicating mass transfer via internal and/or external diffusion and active sites with different adsorption potentials. Moreover, the thermodynamic analysis confirmed that the adsorption process was spontaneous and exothermic, with physisorption as the dominant mechanism. In addition, the Fe₃O₄/poly(AA) hydrogel is capable of removing 95% of the dyes after ten consecutive adsorption–desorption cycles, demonstrating the potential of hydrogels loaded with Fe₃O₄ particles for the treatment of wastewater contaminated with dyes.

Ursolic acid (UA) and oleanolic acid (OA) are two widely distributed triterpenes in fruits, especially those belonging to Rosaceae family. These triterpene isomers are of great pharmacological interest due to their multiple bioactive properties. For this reason, the objective of this study was to determine the content of UA and OA extracted from the cuticular wax of five highly edible fruits (quince, loquat, pear, peach and apple) all belonging to the Rosaceae family. The acids were analyzed by high performance liquid chromatography. Both UA and OA are present in all these fruits, however, UA is in greater quantities.

In this study, poly(HEMA-PEGxMEM-IA) hydrogels were prepared by radical copolymerization of poly(ethylene glycol) methyl ether methacrylate (PEGxMEM), 2-hydroxyethyl methacrylate (HEMA), and itaconic acid (IA). The reaction was carried out in ethanolic solution using N,N′-methylenebisacrylamide (MBA) as a crosslinking agent and 1-hydroxycyclohexyl phenyl ketone (HCPK) as a photo-initiator. The poly(HEMA-PEGxMEM-IA) hydrogels (HGx) were evaluated as a delivery system for ursolic acid (UA), a phytochemical extracted from the plant Clinopodium revolutum, “flor de arena”. The hydrogels were characterized by Fourier-transform infrared spectroscopy (FTIR-ATR), Raman spectroscopy, X-Ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The swelling behavior was studied in buffer solutions from pH 2 to 10, specifically at pH 2.2 (gastric environment) and 7.4 (intestinal environment). It was found that the hydrogels studied showed sensitivity to pH. At pH 2.2, the degree of swelling for HG₅ and HG₉ hydrogels was 0.45 and 0.93 (g water/g hydrogel), respectively. At pH 7.4, the degree of swelling for HG₅ and HG₉ hydrogels was 1.97 and 2.64 (g water/g hydrogel), respectively. The SEM images show the variation in pore size as a function of pH, and the UA crystals in the pores of the hydrogels can also be observed. The in vitro UA release data best fit the Korsmeyer–Peppas kinetic model and the diffusion exponent indicates that the release mechanism is governed by Fickian diffusion.

En este trabajo se propuso un método para obtener ácido ursólico (AU) de manera fácil, rápida y económica teniendo como materia prima la planta medicinal Clinopodium revolutum endémica del Perú, conocida y comercializada con el nombre de flor de arena o té indio. La técnica de recristalización selectiva que se empleó resultó ser eficiente debido a que se obtuvo cristales de AU sin la necesidad de métodos cromatograficos de purificación ni el uso de solventes tóxicos. La pureza determinada por HPLC es mayor a 95%. Así, la flor de arena se convierte en una importante biofuente de este compuesto.

In materials science, silicon dioxide has received significant attention in different research areas, gaining valuable space and interest between researchers due to its diverse applications, ranging from the synthesis of supports for catalysts to materials for controlled drug liberation. Herein we describe fundamental and important chemical aspects of the sol-gel process in the synthesis of silica, starting from precursor molecules of silicon alkoxides and organosilanes. Moreover, this review analyses how the acid/basic catalyst and the type of precursor affect the hydrolysis and condensation reaction, as well as the structure and morphology of the obtained material.