Run-up processes of the 2011 Tohoku tsunami into the city of Kamaishi, Japan, were simulated numerically using 2-D shallow water equations with a new treatment of building footprints. The model imposes an internal hydraulic condition of permeable and impermeable walls at the building footprint outline on unstructured triangular meshes. Digital data of the building footprint approximated by polygons were overlaid on a 1.0 m resolution terrain model. The hydraulic boundary conditions were ascertained using conventional tsunami propagation calculation from the seismic center to nearshore areas. Run-up flow calculations were conducted under the same hydraulic conditions for several cases having different building permeabilities. Comparison of computation results with field data suggests that the case with a small amount of wall permeability gives better agreement than the case with impermeable condition. Spatial mapping of an indicator for run-up flow intensity (IF = (hU2)max, where h and U respectively denote the inundation depth and flow velocity during the flood, shows fairly good correlation with the distribution of houses destroyed by flooding. As a possible mitigation measure, the influence of the buildings on the flow was assessed using a numerical experiment for solid buildings arrayed alternately in two lines along the coast. Results show that the buildings can prevent seawater from flowing straight to the city center while maintaining access to the sea.
In the upper and middle reaches of rivers in Japan, river channels used to meander in a comparatively narrow floodplain and heavy rain runoff used to naturally expand over the entire floodplain, retarding floods toward the downstream. Recent continuous levee building to prevent river overflow has had two kinds of negative effects, namely an increase in flood damage in areas of a floodplain closed by levees and river terraces at the time of runoff over the river channel capacity, and an increase in the flood peak toward the downstream. This study introduces the concept of a running water-type retarding basin that mitigates flood damage by allowing excess runoff to pass through the floodplain, restoring a natural hydrological process. After a description of the concept of the facility design, a design example is presented for a closed floodplain of the Kinu River Floodplain, where excess runoff caused severe flood damage in 2015, to quantify the performance and effects of the running water-type retarding basin.
1 January 2017 in Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM))