This paper aims to resolve the three major issues of fault tolerant control (FTC) for robot manipulators: (i) the faster response, lower tracking errors, lower chattering and higher robustness of the FTC, (ii) the requirement of partial or full knowledge of robot dynamics for the design of model-based FTC, and (iii) the global fixed-time convergence of the system. First, a fixed-time controller based on a backstepping control is designed and its disadvantages are analysed. Then, an adaptive fuzzy backstepping control is developed to enhance the tracking performance of the system. The proposed approach does not require the full prior knowledge of robot dynamic model, thus facilitating implementation of the controller in practical applications. In addition, the tracking errors of the system will be practically convergent within a fixed-time, which provides additional system information in advance. The fixed time convergence of the system is mathematically proved and the performance of the system is demonstrated for FTC of a PUMA560 robot.
21 February 2024 in IEEE Transactions on Fuzzy Systems
This study proposes a new distributed control method based on an adaptive fuzzy control for multiple collaborative autonomous underwater vehicles (AUVs) to track a desired formation shape within a fixed time. First, a formation control protocol based on a fixed-time backstepping sliding mode control is designed, in which the consensus cooperative tracking errors for each AUV will be formulated. Then, to compensate for the saturated control torques, an adaptive auxiliary variable is introduced. Finally, a fixed-time adaptive fuzzy logic control (FLC) is derived to approximate the unknown dynamics, in which the adaptive laws of the FLC is derived such that the adaptive signals and errors can be convergent within a fixed time. The fixed-time convergence is desired in practice because it provides an exciting property that the global convergence of the whole system is independent with the initial states of the AUVs. The computer simulation results for a consensus formation control of four AUVs show that the proposed formation control can provide higher tracking performance with lower and smoother control efforts.
In advanced manufacturing, strict safety guarantees are required to allow humans and robots to work together in a shared workspace. One of the challenges in this application field is the variety and unpredictability of human behavior, leading to potential dangers for human coworkers. This paper presents a novel control framework by adopting safety-critical control and uncertainty estimation for human-robot collaboration. Additionally, to select the shortest path during collaboration, a novel quadratic penalty method is presented. The innovation of the proposed approach is that the proposed controller will prevent the robot from violating any safety constraints even in cases where humans move accidentally in a collaboration task. This is implemented by the combination of a time-varying integral barrier Lyapunov function (TVIBLF) and an adaptive exponential control barrier function (AECBF) to achieve a flexible mode switch between path tracking and collision avoidance with guaranteed closed-loop system stability. The performance of our approach is demonstrated in simulation studies on a 7-DOF robot manipulator. Additionally, a comparison between the tasks involving static and dynamic targets is provided. Note to Practitioners —This research addresses the need to improve the safety of robots interacting with humans when performing collaborative tasks. Existing safety-critical control (SCC) approaches do not adequately monitor and continuously limit the state of the robot in Cartesian space, which results in a risk of injury to human operators if there is unexpected behavior during collaboration. Additionally, existing SCC approaches only consider system uncertainty for a single task (i.e. path tracking only or collision avoidance only). These problems limit the applicability of SCC techniques to manufacturing cobots. We address these problems by developing a controller that accounts for uncertainty in robot dynamics, guarantees that the robot end-effector remains within a constrained task space, and continuously modifies its motion in real-time to avoid dynamic obstacles that violate this space. We employ a machine learning approach to estimate the unknown uncertainties in real-time, allowing them to be incorporated within the controller design. The designed controller selects the shortest path for collision avoidance at each sample instant in order to minimize the total motion of the robot.
25 December 2023 in International Journal of Robust and Nonlinear Control
This article proposes a novel fixed‐time integral sliding mode controller for admittance control to enhance physical human‐robot collaboration. The proposed method combines the benefits of compliance to external forces of admittance control and high robustness to uncertainties of integral sliding mode control (ISMC), such that the system can collaborate with a human partner in an uncertain environment effectively. First, a fixed‐time sliding surface is applied in the ISMC to make the tracking error of the system converge within a fixed time regardless of the initial condition. Then, a fixed‐time backstepping controller (BSP) is integrated into the ISMC as the nominal controller to realize global fixed‐time convergence. Furthermore, to overcome the singularity problem, a nonsingular fixed‐time sliding surface is designed and integrated into the controller, which is useful for practical application. Finally, the proposed controller is validated for a two‐link robot manipulator with uncertainties and external human forces. The results show that the proposed controller is superior in the sense of both tracking error and convergence time, and at the same time, can comply with human motion in a shared workspace.
16 April 2024 in IEEE Transactions on Intelligent Vehicles
Within the context of Nonlinear Model Predictive Control (NMPC) design for autonomous mobile robots, which face challenges such as parametric uncertainty and measurement inaccuracies, focusing on dynamic modelling and parameter identification becomes crucial. This paper presents a novel safety-critical control framework for a mobile robot system that utilises NMPC with a prediction model derived entirely from noisy measurement data. The Sparse Identification of Nonlinear Dynamics (SINDY) is employed to predict the system's state under actuation effects. Meanwhile, the Control Barrier Function (CBF) is integrated into the NMPC as a safety-critical constraint, ensuring obstacle avoidance even when the robot's planned path is significantly distant from these obstacles. The closed-loop system demonstrates Input-to-State Stability (ISS) with respect to the prediction error of the learned model. The proposed framework undergoes exhaustive analysis in three stages, training, prediction, and control, across varying noise levels in the state data. Additionally, validation in Matlab and Gazebo illustrates that the NMPC-SINDY-CBF approach enables smooth, accurate, collision-free movement, even with measurement noise and short prediction times. Our findings, supported by tests conducted with the Husky A200 robot, confirm the approach's applicability in real-time scenarios.