This article presents research on the usefulness of three different electric circuit simulation environments for exploring energy harvesting from electromagnetic waves using energy harvesters. The software that is compared includes KiCad EDA, LT Spice and MATLAB Simscape Electrical.Too prepare a common background for the results comparison, crucial equations that combine RF transmission with energy are presented. Commercially available harvesters are also presented. An overview of the state-of-the-art research on this topic is summarised. In order to verify software using conditions that are similar to real ones, the power available at the 868 MHZ ISM band, which is close to the LTE bands used for telecommunications, is calculated. The results obtained using different software are close to being identical for all tested simulation environments.
26 June 2025 in Archives of Electrical Engineering
RF energy harvesters require a precise design and verification. Power conversion efficiency (PCE) is affected by a number of factors. Among others, there are: design of emitting and transmitting circuits, transmission conditions, frequency, bandwidth and dis-tance between antennas. All of those factors contribute to the final effectiveness of RF en-ergy harvesting (RFEH) circuits. This is why it is important to standardize conditions of simulating and measuring the circuits performance. Only then it will be possible to compare usefulness of different designs. This article discusses such conditions and proposes some standardizations.
RF Energy Harvesting (RFEH) circuits have been extensively researched in recent years. Researchers have proposed dozens of RFEH models with various architectures and topologies. Due to the small amount of energy available to be harvested, RFEH circuits must be as efficient as possible, both in terms of receiving energy and its further processing. Recent research has identified that in resonant circuits, some of the received energy is retransmitted and therefore lost.