Increasing environmental pollution is connected with broad applications of dyes and imperfection of dyeing technology. Decolourization of triphenylmethane brilliant green and disazo Evans blue by bacterial and fungal strains and toxicity (phyto- and zootoxicity) of degradation by-products were investigated. Influence of incubation method on dyes removal was evaluated (static, semi-static, shaken). Dead biomass was used for sorption estimation. Toxicity of treated dyes was measured to estimate possible influence on aquatic ecosystems. The zootoxicity test was done with Daphnia magna and phytotoxicity with Lemna minor. Samples were classified according to ACE 89/BE 2/D3 Final Report Commission EC. The best results of removal for all tested strains were reached in shaken samples. In opposite to fungi, bacterial strains decolourized brilliant green more effectively than Evans blue. The most effective bacterial strain was Erwinia spp. (s12) and fungal strains were Polyporus picipes (RWP17) and Pleurotus ostreatus (BWPH and MB). Decolourization of brilliant green was connected with decrease of zootoxicity (D. magna) and phytotoxicity (L. minor). Removal of Evans blue was connected with no changes in zootoxicity and decrease of phytotoxicity in most of samples.

Different technologies may be used for decolorization of wastewater containing dyes. Among them, biological processes are the most promising because they seem to be environmentally safe. The aim of this study was to determine the efficiency of decolorization of two dyes belonging to different classes (azo and triphenylmethane dyes) by immobilized biomass of strains of fungi (Pleurotus ostreatus - BWPH, Gleophyllum odoratum - DCa and Polyporus picipes - RWP17). Different solid supports were tested for biomass immobilization. The best growth of fungal strains was observed on the washer, brush, grid and sawdust supports. Based on the results of dye adsorption, the brush and the washer were selected for further study. These solid supports adsorbed dyes at a negligible level, while the sawdust adsorbed 82.5% of brilliant green and 19.1% of Evans blue. Immobilization of biomass improved dye removal. Almost complete decolorization of diazo dye Evans blue was reached after 24h in samples of all strains immobilized on the washer. The process was slower when the brush was used for biomass immobilization. Comparable results were reached for brilliant green in samples with biomass of strains BWPH and RWP17. High decolorization effectiveness was reached in samples with dead fungal biomass. Intensive removal of the dyes by biomass immobilized on the washer corresponded to a significant decrease in phytotoxicity and a slight decrease in zootoxicity of the dye solutions. The best decolorization results as well as reduction in toxicity were observed for the strain P. picipes (RWP17).

Dyes are the most difficult constituents to remove by conventional biological wastewater treatment. Colored wastewater is mainly eliminated by physical and chemical procedures, which are very expensive and have drawbacks. Therefore, the advantage of using biological processes, such as the biotransformation of dyes, is that they may lead to complete mineralization or formation of less toxic products. To prove the possibility of using fungal processes for decolorization and other applications, the analysis of the toxicity of the processes' products is required. The decolorization of the mixture of two dyes from different classes - triphenylmethane brilliant green and azo Evans blue (GB - total concentration 0.08 g/L, proportion 1:1 w/w) - by Pleurotus ostreatus (BWPH and MB), Gloeophyllum odoratum (DCa), RWP17 (Polyporus picipes) and Fusarium oxysporum (G1) was studied. Zootoxicity (Daphnia magna) and phytotoxicity (Lemna minor) changes were estimated at the end of the experiment. The mixture of dyes was significantly removed by all the strains that were tested with 96 h of experimental time. However, differences among strains from the same species (P. ostreatus) were noted. Shaking improved the efficacy and rate of the dye removal. In static samples, the removal of the mixture reached more than 51.9% and in shaken samples, more than 79.2%. Tests using the dead biomass of the fungi only adsorbed up to 37% of the dye mixture (strain BWPH), which suggests that the process with the living biomass involves the biotransformation of the dyes. The best results were reached for the MB strain, which removed 90% of the tested mixture under shaking conditions. Regardless of the efficacy of the dye removal, toxicity decreased from class V to class III in tests with D. magna. Tests with L. minor control samples were classified as class IV, and samples with certain strains were non-toxic. The highest phytotoxicity decrease was noted in shaken samples where the elimination of dye mixture was the best.

Decolorization of brilliant green (0.06 g/L), Evans blue (0.15 g/L), and their mixture (total concentration 0.08 g/L, proportion 1:1 w/w) by fungi was studied. Fungal strains [Pleurotus ostreatus (BWPH), Gloeophyllum odoratum (DCa), and Fusarium oxysporum (G1)] were used separately and as a mixture of them. Zootoxicity (Daphnia magna) and phytotoxicity (Lemna minor) changes were estimated after the end of experiment. Mixtures of fungal strains were less effective in decolorization process than the same strains used separately (as a single strains). After 96 h of experiment, living biomass of strain BWPH removed up to 95.5 %; DCa, up to 84.6 %; G1, up to 79.2 % where mixtures BWPH + DCa removed up to 74.3 %; and BWPH + G1, only up to 32.2 % of used dyes. High effectiveness of dyes removal not always corresponded with decrease of toxicity. The highest decrease of zootoxicity and phytotoxicity (from V to III toxicity class or to even nontoxic) was noticed for single strains, while no changes or slight toxicity decrease was noticed in samples with strains mixtures.

A strong economic foundation can be achieved by the growth of a number of businesses, including food, paper, clothes, leather, and textiles. However, because of improper waste management, industrialization and modernization have resulted in the massive disposal of water effluent laden with harmful substances like dyes and heavy metals, which has negatively impacted the ecosystem. A new green technology called myco-remediation has emerged to battle harmful toxins while promoting sustainable development effectively and economically. This review employed enzymatic degradation, biosorption, and their influencing parameters for optimization in order to highlight the invaluable potential of fungal bioremediation for dye degradation. Current perspectives on enzyme immobilization techniques and kinetic studies of dye removal have been reviewed, which can aid in the selection of quick and effective removal processes. This research offers new insight into a criterion that is often overlooked in favor of dye decolorization efficiency: the toxicity assessment of pure dye and post-process metabolites produced following myco-remediation. Our attention has been directed towards toxicity analysis at many levels, including genotoxicity, phytotoxicity, and zoo-toxicity. This is important to keep in mind when considering the extensive implications of myco-remediation for the recycling and reuse of industrial effluent. Enzyme engineering and omics technologies have been highlighted as potential future developments.