A useful method for eliminating the detrimental effect of laser frequency instability on Brillouin signals by employing the self-heterodyne detection of Rayleigh and Brillouin scattering is presented. From the analysis of Brillouin scattering spectra from fibers with different lengths measured by heterodyne detection, the maximum usable pulse width immune to laser frequency instability is obtained to be about 4 µs in a self-heterodyne detection Brillouin optical time domain reflectometer (BOTDR) system using a broad-band laser with low frequency stability. Applying the self-heterodyne detection of Rayleigh and Brillouin scattering in BOTDR system, we successfully demonstrate that the detrimental effect of laser frequency instability on Brillouin signals can be eliminated effectively. Employing the broad-band laser modulated by a 130-ns wide pulse driven electro-optic modulator, the observed maximum errors in temperatures measured by the local heterodyne and self-heterodyne detection BOTDR systems are 7.9 °C and 1.2 °C, respectively.
Conventional single-mode fiber (SMF) Brillouin optical time-domain reflectometry (BOTDR) suffers from a low signal-to-noise ratio (SNR) and severe sensing reliability due to the influence of the stimulated Brillouin scattering threshold and bend loss. In this study, a simple and low-cost distributed sensing structure, with a single-mode input fiber alignment fusion and a 50 μm diameter graded index multimode sensing fiber, is designed, and the SNR characteristic is investigated. Through theoretical derivation and experimental verification, a higher SNR and excellent bending resistance are realized in BOTDR. The experimentally measured improvements in the SNR of the proposed sensing structure over the SMF at the beginning and end of a 5 km fiber are 2.5 dB and 1.3 dB, respectively. The minimum bending radius of the sensing structure is 2.25 mm, which is much better than that of the SMFs. The bidirectional optical losses between the SMF and the 50 μm graded index multimode fiber are measured by a simple experiment system and are 0.106 dB and 1.35 dB, respectively. The temperature-sensing characteristics of the sensing structure are measured by the self-built frequency-shift local heterodyne BOTDR sensor, and the measured temperature sensitivity and accuracy are 0.946 MHz/℃ and 1 ℃, respectively. The design provides a reference for BOTDR with a high SNR and has great potential for structural safety and health monitoring of infrastructures.
Distributed temperature/strain measurement utilizing Brillouin optical fiber sensors in Internet-of-Things (IoT) has attracted more attention to achieve state monitoring of large-scale structure. However, the huge amount of measurement data increases the hardware burden and limits the measurement speed. To address this problem, distributed measurement based on sparse spectra of Brillouin optical fiber sensors in IoT is proposed in this paper. Non-locally centralized sparse representation (NCSR) and fast iterative shrinkage thresholding (FIST) algorithms are adopted to sparsely represent and reconstruct the measured Brillouin scattering spectra (BSS), respectively. Compared with other sparse representation and reconstruction algorithms, the performance of NCSR and FIST for signal-to-noise ratio (SNR) enhancement and successful recovery is the best. Only 25% of samples is needed to reconstruct BSS for further extraction of Brillouin frequency shift (BFS) and temperature. The consistence of BFSs obtained from original and reconstructed BSS both in simulation and experimental results indicates that the extracted BFSs and temperatures are reliable and accurately by applying sparse BSS obtained by NCSR and FIST. Different frequency scanning intervals and heating temperatures in the experiment are also considered for analysis and discussion. The proposed method has been demonstrated to be effective to decrease the quantity of data for acquisition, storage and further analysis, which is conducive to reduce the system cost and improve the SNR to achieve distributed measurement in IoT.