Analyses of possible synergies between energy recovery and water management are essential for achieving sustainable improvements in the performance of irrigation water networks. Improving the energy efficiency of water systems by hydraulic energy recovery is becoming an inevitable trend for energy conservation, emissions reduction, and the increase of profit margins as well as for environmental requirements. This paper presents the state of the art of hydraulic energy generation in drinking and irrigation water networks through an extensive review and by analyzing the types of machinery installed, economic and environmental implications of large and small hydropower systems, and how hydropower can be applied in water distribution networks (drinking and irrigation) where energy recovery is not the main objective. Several proposed solutions of energy recovery by using hydraulic machines increase the added value of irrigation water networks, which is an open field that needs to be explored in the near future.

Water irrigation systems are required to provide adequate pressure levels in any sort of network. Quite frequently, this requirement is achieved by using pressure reducing valves (PRVs). Nevertheless, the possibility of using hydraulic machines to recover energy instead of PRVs could reduce the energy footprint of the whole system. In this research, a new methodology is proposed to help water managers quantify the potential energy recovering of an irrigation water network with adequate conditions of topographies distribution. EPANET has been used to create a model based on probabilities of irrigation and flow distribution in real networks. Knowledge of the flows and pressures in the network is necessary to perform an analysis of economic viability. Using the proposed methodology, a case study has been analyzed in a typical Mediterranean region and the potential available energy has been estimated. The study quantifies the theoretical energy recoverable if hydraulic machines were installed in the network. Particularly, the maximum energy potentially recovered in the system has been estimated up to 188.23 MWh/year) with a potential saving of non-renewable energy resources (coal and gas) of CO₂ 137.4 t/year.

Water is one of the most valuable resources for humans. Worldwide, leakage levels in water distribution systems oscillate between 10% and 55%. This causes the need for constant repairs, economic losses, and risk to the health of users due to possible pathogenic intrusion. There are different methods for estimating the level of leakage in a network, depending on parameters such as service pressure, orifice size, age and pipe material. Sixty-two water distribution networks were analyzed to determine the leakage method used, the calibration method, and the percentage of existing leaks. Different efficiency indicators were proposed and evaluated using this database. Several cases of installation of pumps working as turbines (PATs) in water distribution networks were analyzed in which the use of these recovery systems caused a pressure drop, reducing the level of leaks and recovering energy.