Accurately reconstructing the strain field within stiffened ship panels is crucial for effective structural health monitoring. This study presents a groundbreaking approach to strain field reconstruction in such panels, utilizing optical fiber sensors in conjunction with the strain function-inverse finite element method (SF-iFEM). A novel technique for solving nodal strain vectors, based on the element strain function, has been devised to improve the accuracy of strain reconstruction using the inverse finite element method (iFEM), addressing the limitations associated with traditional nodal displacement vector solutions. Moreover, the proposed method for determining the equivalent neutral layer of stiffened ship panels not only reduces the number of elements effectively but also establishes a strain function between the inner and outer surfaces of the structure. Using this function, a layout scheme for optical fiber sensors on the inner side of ship stiffened panels is provided, overcoming the symmetrical arrangement constraints of iFEM for sensor placement on both the inner and outer sides of the structure. The results demonstrate a significant improvement in strain reconstruction accuracy under bending and bending–torsion deformations compared to conventional iFEM. Consequently, the findings of this research will contribute to enhancing the engineering applicability of iFEM in ship structure health monitoring.
Precise morphology acquisition for the variable wing leading edge is essential for its bio-inspired adaptive control. Therefore, this study proposes a morphological reconstruction method for the variable wing leading edge, utilizing the node curvature vectors-based curvature propagation method (NCV-CPM). By establishing a strain–arc curvature function, the method fundamentally mitigates the impact of surface curvature angle on curvature computation accuracy at sensing points. We introduce a technique that uses high-order curvature fitting functions to determine the curvature vectors of arc segment nodes. This method reduces cumulative errors in curvature computation linked to the linear interpolation-based curvature propagation method (LI-CPM) at unattached sensor positions. Integrating curvature–strain functions aids in wing leading-edge strain field reconstruction, supporting structural health monitoring. Additionally, a particle swarm algorithm optimizes the sensing point distribution, reducing network complexity. This study demonstrates significantly enhanced morphological reconstruction accuracy compared to those obtained with conventional LI-CPM.