High average power lasers with a high pulse energy are of considerable interest in various fields such as high-energy-density physics. Light-absorbing edge cladding is effective in suppressing parasitic oscillations in high-pulse-energy disk lasers; however, the large amount of heat generated from the cladding can affect the laser medium. We develop an improved conduction-cooled active-mirror laser with a double-sided cooled-edge cladding. A stable laser output with a pulse energy of 10 J at a repetition rate of 100 Hz was achieved using six liquid-nitrogen-cooled active-mirrors in the main amplifier. This study shows that aggressive cooling of the edge cladding is highly effective in decreasing the temperature rise and controlling the temperature distribution in the laser medium.
Highly transparent ceramic is an attractive gain medium for high-power lasers due to its high fracture toughness, homogeneity, and size scalability. Here we report the first -doped ceramics laser. Codoping of ion can reduce the formation of ions and enhance the laser efficiency. In the laser experiment, the maximum output power of 4.36 W and the maximum slope efficiency of 69.5% were obtained with a 3% La, 2% Yb sample and a 2% La, 1% Yb sample, respectively. Due to the combined properties of and a ceramic laser gain medium, ceramic is a promising gain medium for a high-power ultrashort pulse laser and amplifier.
High-repetition-rate optical frequency combs are useful for precision spectroscopy because of their high power per comb mode, but conventional high-repetition-rate lasers do not have a broad enough spectrum. In this study, a fully stabilized polarization-maintaining figure-9 mode-locked fiber laser with a high repetition rate of 206 MHz and a broad spectrum was demonstrated by employing simultaneous control of cavity dispersion and length. The laser exhibited a 3 dB spectral bandwidth of 88 nm and a compressed pulse width of 66 fs. Additionally,fCEOandfrepphase locking were implemented, resulting in low (0.21 rad) in-loop carrier-envelope-offset frequency phase noise. To the best of our knowledge, this is the widest spectrum bandwidth and shortest pulse duration directly obtained from an all-PM figure-9 fiber laser oscillator to date. The combination of high repetition rate and broad spectral range makes this system very useful for a wide range of applications, especially in the field of precision spectroscopy.
In this Letter, we demonstrate, to the best of our knowledge, the first Kerr-lens mode-locked (KLM) ceramic thin-disk laser. Ceramic laser gain media have many advantages for a high-power laser such as high fracture toughness, size scalability, low cost, and short time fabrication. By using the ceramic thin disk, the pulse duration of 98 fs with the output power of 3.7 W was demonstrated. The shortest pulse duration was 86 fs with the decreased output power of 0.36 W. From our results, it was proven that a KLM thin-disk laser with ceramic gain media can become a new option for high-power, sub-100 fs pulse laser sources.
Nonlinear fiber effects are useful for controlling optical spectra in a wide variety of ways. Here, we report the demonstration of freely controllable, intense spectral peaking using a high-resolution spectral filter with a liquid-crystal spatial light modulator and nonlinear fibers. A large enhancement of spectral peak components by more than a factor of 10 was achieved by employing phase modulation. Multiple spectral peaks with an extremely high signal-to-background ratio (SBR) of up to 30 dB were generated simultaneously in a wide wavelength range. It was shown that part of the energy from the whole pulse spectrum was concentrated at the filtering part and constructed the intense spectral peaks. This technique is very useful for highly sensitive spectroscopic applications and comb mode selection.