We comprehensively review InP-based monolithically integrated photonic devices for digital coherent transmission. A single-stripe tunable laser consisting of the tunable distributed amplification (TDA)-chirped sampled grating-distributed reflector (CSG-DR) structure has yielded the high fiber output power of more than +17 dBm and the narrow spectral linewidth of less than 200 kHz, which achieved sufficient properties for 16-ary quadrature amplitude modulation (16QAM). A dual-polarization In-phase and Quadrature (DP-IQ) modulator module with the Mach-Zehnder modulator array accomplished 16QAM modulation for 224 Gb/s at a low differential driving voltage of 2.5 V$_{pp}$. A photodetector monolithically integrated with a 90° hybrid presented a high responsivity (> 0.130 A/W over C-band) and the stable operation with low dark current over 5,000 h in the accelerated aging test (test condition: -7.5 V at 175°C). Demodulation of 224 Gb/s DP-16QAM modulated signals was demonstrated as the compact coherent receiver using this photodetector. A wide 3-dB bandwidth of more than 40 GHz for 400 Gb/s DP-16QAM by 64 GBaud operation was also realized as the receiver thanks to p-i-n-photodiodes with a high-speed response.
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
We have fabricated III–V gain region/Si waveguide hybrid lasers with an InP-based two-storied ridge structure using direct bonding technology. Continuous-wave operation at a temperature of 20 °C with a threshold current as low as 30 mA was obtained for a hybrid laser consisting of a Fabry–Perot cavity with facets formed on the Si waveguide, and it was achieved thanks to a high optical coupling efficiency of over 80% at the interface between the III–V gain region and the Si waveguide using a two-storied ridge structure and a taper waveguide. The wavelength tunable laser which is comprised of a Si cavity with a loop mirror and double ring filters and III–V gain regions with laser and semiconductor optical amplifier (SOA) sections was demonstrated by utilizing this hybrid structure. It exhibited a wide wavelength tuning range of 48.6 nm and an optical amplification of 10 dB by SOA.
In this Letter, we demonstrate, to the best of our knowledge, the first Kerr-lens mode-locked (KLM) ceramic thin-disk laser. Ceramic laser gain media have many advantages for a high-power laser such as high fracture toughness, size scalability, low cost, and short time fabrication. By using the ceramic thin disk, the pulse duration of 98 fs with the output power of 3.7 W was demonstrated. The shortest pulse duration was 86 fs with the decreased output power of 0.36 W. From our results, it was proven that a KLM thin-disk laser with ceramic gain media can become a new option for high-power, sub-100 fs pulse laser sources.
1 September 2021 in IEEE Journal of Selected Topics in Quantum Electronics
This paper reports on the performance of an InP-based butt-joint (BJ) coupled waveguide photodiode (PD) for 100 GBaud coherent detection. We adopt a dual-layer absorber comprised of p- and i-type GaInAs absorption layers to enhance the advantage of BJ coupled waveguide PDs which overcome the tradeoff between high responsivity and wide bandwidth. As a result, a responsivity as high as 0.90 A/W over the C-band and a wide 3 dB bandwidth of 71 GHz have been successfully obtained at a reverse bias voltage of 2.5 V. Towards the realization of compact coherent modules without complicated assembly processes, we have also fabricated a compact photonic integrated circuit (PIC) chip (Chip size: 2.6 × 4.1 mm) configured by 12 BJ coupled waveguide PDs and various optical functions, such as 90° hybrids and variable optical attenuators (VOAs) through the InP-based monolithic integration technology. An integrated coherent transmitter-receiver optical sub-assembly (IC-TROSA) employing the PIC has exhibited receiver performance sufficient for 100 GBaud coherent detection.
4 September 2024 in IEEE Journal of Selected Topics in Quantum Electronics
This paper reports on the power scalability of 1.55-μm-wavelength photonic crystal surface emitting lasers (PCSELs) utilizing the design flexibility of the double-lattice photonic crystal. By controlling in-plane optical coupling, we have achieved single-mode continuous-wave lasing with various device sizes ranging from 100 μm to 300 μm in diameter. The output power exceeds 500 mW for a device size of 300 μm, and wall-plug efficiencies of all fabricated devices exceed 18%. Highly stable single-mode lasing with a side-mode suppression ratio over 60 dB is obtained even at the maximum output powers. Narrow circular beams are obtained, and the divergence angles decrease with increasing device size, ranging from 0.55 degrees to 0.23 degrees in FWHM for device sizes from 100 μm and 300 μm, respectively.