In 2019, Indonesia’s electricity consumption exceeded 278 TWH, or about 1.08 MWh/capita. This value shows a considerable increase in electricity consumption which has doubled in just a decade. Previous studies have shown that the proportion of electricity consumption used for lighting needs is correlated to the country’s GDP. This is generally around 20 to 50% of electricity production but can go up to 86% in the case of Tanzania. Indonesia is the 4th country in the world in terms of population and its lighting market as well as its lighting-related energy consumption has a strong impact on several levels: societal, environmental but also economic and energy. Having a knowledge of the lamps used by the Indonesian people is therefore particularly interesting and important, in particular in the context which presents a great societal diversity but also in a context of energy saving. Indonesia is an archipelagic country made up of 5 large islands and over 17,000 small islands with widely varying levels of population density. This island geography leads Indonesia to face challenges in the distribution and production of electrical energy, which affects the use of lamps in various types of regions. The overview of this study was done by collecting data from various sources, especially BPS (Biro Pusat Statistik/Statistic Center Bureau of Indonesia), CLASP (an NGO for clean energy), the Ministry of Energy and Mineral Resources of Indonesia (ESDM), PLN (Indonesian Electrical Company), etc. The data obtained from these sources provides several descriptions of general lighting conditions in Indonesia viewed from several angles, such as growth of lamp market, use of lamp types, percentage of use of lamps with energy saving (ESL), etc. Considering that Indonesia has various regional characteristics, in this study, the survey of a total of 394 respondents was conducted on the use of lamps by creating regional categories based on electrical conditions, power consumption, and electricity per capita, among others. The categories of areas observed fall into 5 types based on their population and geography: large cities, small towns, rural/village areas, islands and remote areas. The results of compiling data from these various sources show that the types of lamps used by Indonesians follow the lighting trend in the world. The use of LED lamps has a utilization percentage of around 52%, much higher than other types of lamps such as CFL, fluorescent or incandescent. Based on the survey conducted, it is known that the widely used LED power is between 1 and 10 watts with a usage time of 8 to 12 h per day. In the next few years, it is estimated that the use of LEDs in Indonesia will increase as the government has prepared various regulations and policies related to energy saving, one of which relates to lighting.

Integrating renewable energy sources (RES) into island microgrids is usually done to provide a cost-effective electricity supply. The integration process is carried out by scheduling generating unit operations with a unit commitment (UC) scheme to ensure low system operating costs. This article discusses developing a UC optimization method for integrating solar photovoltaic plants in Indonesia’s Eastern Sumba microgrid power system. The scope of this study is the optimization algorithm of the UC, which consists of a priority list (PL) for the UC stage and an economic dispatch (ED) that relies on a genetic algorithm (GA) to minimize total operating costs (TOC). The results show that the PL-GA algorithm performs better than the extended priority list (EPL), and combinations of genetic algorithm and Lagrange, by applying continuous problem dispatch and improved binary GA hourly dispatch to meet ramping constraints. The application of RES incentive programs, such as carbon taxes and incentives for RES generation in calculating the TOC, shows an improvement in the financial feasibility analysis of the internal rate of return (IRR) and net present value (NPV) of actual projects in Indonesia.

The widespread use of domestic LED lamps raises concerns about harmonic current aggregation when multiple units operate in parallel. This study presents a regression-based method for predicting aggregate current waveforms of identical LED lamps. Measurements conducted in accordance with IEC 61000-4-30:2015 involved 1–24 parallel-connected units of a 12 W lamp under controlled conditions. Individual harmonics through the 40th order were assessed against IEC 61000-3-2 product limits, while components up to the 50th order were retained for PCC-oriented characterization of large-scale aggregation, consistent with IEEE 519-2022. Although the product limits were satisfied, measured THD_I remained at 88.6–92%, dominated by the 3rd, 5th, and 7th harmonics. Within the measured range, per-harmonic regressions were evaluated using R² and RMSE, while reconstructed time-domain waveforms produced NRMSE values of 5–10% relative to measured RMS current. Consistent phase angles indicated predominantly constructive aggregation. The model was then applied to an illustrative scenario of up to 100 identical lamps. Under unchanged lamp and supply conditions, the projection indicated a near-linear increase in RMS current, persistent THD_I of approximately 90%, and continued dominance of low-order odd harmonics. Results beyond 24 lamps represent model-based extrapolation rather than experimental validation. The framework provides a baseline for harmonic current assessment in homogeneous LED installations.