Abrham Gebre Tarekegn

Dr. Abrham Gebre Tarekegn

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 April 2023 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
TYTsagazeab Yimer
Tsagazeab Yimer
ATAbrham Gebre Tarekegn
Abrham Gebre Tarekegn
The mechanical behavior of fiber-cement composites is significantly influenced by the interfacial bonding between the fiber and the cement matrix. However, natural fibers are less chemically compatible with the cement matrix. As a result, it is essential to modify the surface of natural fibers to achieve good fiber-matrix interfacial bonds. In the current study, sisal fibers intended for use as a reinforcement in concrete matrices were alkali treated with NaOH solutions (2%, 5%, and 10%) for 12 hrs, 24 hrs, and 48 hrs. Water absorption, tensile strength, and surface morphological changes in fibers were studied. The effect of fiber treatment on the concrete was also assessed by measuring its slump, compressive strength, flexural strength, and toughness. Alkali treatment was discovered to reduce the water absorption capacity of sisal fiber. On the contrary, fiber surface morphology and mechanical properties improved up to a point and then gradually declined. The addition of treated sisal fiber considerably increases concrete’s flexural strength and toughness. However, an insignificant change in compressive strength was observed.

9 February 2023 in Asian Journal of Civil Engineering
Verified
Journal Article
Closed access
PDF file
BBBerhanu Tefera Beyene
Berhanu Tefera Beyene
AZAdil Zekaria
Adil Zekaria
ATAbrham Gebre Tarekegn
Abrham Gebre Tarekegn

13 January 2025 in American Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
BTBelay Tefera
Belay Tefera
ATAbrham Gebre Tarekegn
Abrham Gebre Tarekegn
Non-destructive testing (NDT) techniques have developed as important instruments in the evaluation of concrete structures, providing a way to analyze structural integrity and material qualities without causing damage. In analyzing the uniformity, homogeneity, approximate compressive strength, durability, the level of rebar corrosion in concrete, and other properties of damaged buildings, NDT technologies have a significant benefit. This paper offers a thorough examination of several NDT methods, emphasizing their usefulness in finding internal flaws, locating embedded items, and measuring surface-hardness and in-situ stress. Each method's applicability, limitations, and measured parameters are thoroughly addressed. The criteria for selecting appropriate NDT methods are discussed, followed by a comparison of different approaches to facilitate decision-making. The interpretation of NDT results is discussed, highlighting the significance of precise data processing and the relevance of sophisticated technology. Case studies were also provided to demonstrate the actual implementation and efficacy of NDT techniques in real-world circumstances. The assessment also suggests investing in advanced data visualization tools to better the interpretation and sharing of NDT results, as well as combining NDT data with Building Information Modeling systems to provide a more complete picture of structural problems. Finally, the paper indicates that NDT techniques are critical for assuring the safety, durability, and preservation of concrete structures, thereby significantly contributing to the upkeep of our built environment.

1 January 2022 in Engineering Perspective
Verified
Journal Article
Closed access
FWFrancis Wantono
Francis Wantono
ATAbrham Gebre Tarekegn
Abrham Gebre Tarekegn
In ballasted railway tracks, one of the important components that supports the rails and distributes wheel/rail loading onto the ballast supporting formation is a railway sleeper. In this paper, the dynamic and fatigue response of prestressed concrete sleepers used along the Ethiopian National Railway lines (Chinese Type II sleeper) is presented. For simulation, a finite element modelling package, ANSYS was employed. Concrete was modelled using a three-dimensional solid element (SOLID 65) and the behavior of prestressing wires was simulated using truss elements (LINK 180). Validation of simulation results was done using existing experimental data of Rikard’s model. To obtain resonance conditions; the harmonic response of the sleeper for the excitation in the range of 0-2000Hz and variation of stress and displacement amplitudes with respect to frequency were studied. It’s observed that the most resonant frequency corresponds to the third bending mode shape. From fatigue life assessment in this study, it is observed that the sleeper fails before attaining its design life of 40 years (11,300,400 cycles). This is due to the development of cracks which are likely to limit the sleeper’s ability to hold the geometry of the line. As a result, the sleeper cannot attain the main technical standards of speed of 120 km/h and axle load of 25 tons. The minimum life of the sleeper is equivalent to about 31.8% of its design life. Moreover, it was observed that at a speed of 80km/h and an axle load of 25 tons, the life of the sleeper was found to be 85%. Thus, to attain the design life of the sleeper, during operational phase, it is recommended to limit the speed of the train to 80km/h.

15 November 2024 in Functional Composites and Structures
Verified
Journal Article
Closed access
ATAbrham Gebre Tarekegn
Abrham Gebre Tarekegn
MGMaraki Gedu
Maraki Gedu
YTYisihak Gebre Tarekegn
Yisihak Gebre Tarekegn
Post-tensioning (PT), a method of pre-stressing, involves the use of high-strength steel strands/tendons to reinforce concrete or other materials. On the contrary, carbon fiber-reinforced polymers (CFRPs) are lightweight, high-strength materials with used to strengthen concrete structures by adhering the polymer to the concrete element. Challenges with post-tensioned elements include reverse curvature of the PT strands, tendon misplacement, and frequent damage in the anchorage and dead-end zones. These difficulties frequently cause bulging of the surrounding concrete, even at lower stress levels, and can lead to concrete bursting when tension exceeds certain threshold. This study investigates into the potential of CFRP strengthening technique to improve the flexural capacity of post-tensioned concrete beams with anchorage loss. Through an experimental program, the study compares the performance of control beams to those reinforced with different layers of CFRP. The results of this study demonstrated that there was a significant increase in flexural capacity, ranging from 45.31% to 78.62% for single layers and 87.17% to 153% for double layers of CFRP sheet. Additionally, the research examines how different levels of prestressing and CFRP wraps influence crack formation and delamination patterns of carbon fiber, with promising results. It was also noted that optimal usage of CFRP fibers and tendons is found to be critical. The study suggests exploring alternative fiber types and orientations for future study.

28 April 2025 in PLOS ONE
Verified
Journal Article
Open access
PDF file
GTGetu Segni Tulu
Getu Segni Tulu
RLRobert Tama Lisinge
Robert Tama Lisinge
ATAbrham Gebre Tarekegn
Abrham Gebre Tarekegn
TETigist Eshetu
Tigist Eshetu
Pedestrian fatalities remain a major road safety problem in Addis Ababa. To address this problem, speed humps and rumble strips were introduced on high-crash road segments in the city in 2017. As a case study that can be useful elsewhere, the aim of this research is to evaluate the effectiveness of speed hump with rumble strips in Addis Ababa. This study uses descriptive and inferential statistics to evaluate the impact of these interventions. Crash data between 2014 and 2021, excluding 2017 when the measures were implemented, is used in the analysis. The interventions led to a 25.08% reduction in operating speeds, with statistically significant speed reductions for passenger cars. Our findings on the extent to which speed humps and rumble strips lowered the speed of buses and trucks are not conclusive. Notable speed drops were observed at humps in some road segments while humps had no appreciable effect on speed in others. This underscores the need for additional measures or other approaches to reduce the operating speed of buses and trucks. The equivalent crash number for pedestrian crashes reduced by 24.45% and total crashes dropped by 51.14%. While crashes involving pedestrians crossing roads reduced, those involving pedestrians walking along travel lanes increased by 15.94%. These mixed results suggests that the effectiveness of speed humps and rumble strips depends on the type of crash being addressed and the category of vehicle involved.