Francisco Falcone

Prof. Francisco Falcone

IEEC, Universidad Pública de Navarra (UPNA), Pamplona, Navarre, Spain
+2
orcid

Research Focus & Metrics

Academic Career Length

28Years (1999-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 April 2005 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
JBJ.D. Baena
J.D. Baena
JBJ. Bonache
J. Bonache
Ferran MartinFerran Martin
Ferran Martin
RSR.M. Sillero
R.M. Sillero
Francisco FalconeFrancisco Falcone
Francisco Falcone
MSM. Sorolla
M. Sorolla
In this paper, a new approach for the development of planar metamaterial structures is developed. For this purpose, split-ring resonators (SRRs) and complementary split-ring resonators (CSRRs) coupled to planar transmission lines are investigated. The electromagnetic behavior of these elements, as well as their coupling to the host transmission line, are studied, and analytical equivalent-circuit models are proposed for the isolated and coupled SRRs/CSRRs. From these models, the stopband/passband characteristics of the analyzed SRR/CSRR loaded transmission lines are derived. It is shown that, in the long wavelength limit, these stopbands/passbands can be interpreted as due to the presence of negative/positive values for the effective /spl epsiv/ and /spl mu/ of the line. The proposed analysis is of interest in the design of compact microwave devices based on the metamaterial concept.

1 November 2004 in Physical Review Letters
Verified
Journal Article
Open access
PDF file
Francisco FalconeFrancisco Falcone
Francisco Falcone
TLT. Lopetegi
T. Lopetegi
MLM. A. G. Laso
M. A. G. Laso
JBJ. D. Baena
J. D. Baena
JBJ. Bonache
J. Bonache
MSM. Sorolla
M. Sorolla
The electromagnetic theory of diffraction and the Babinet principle are applied to the design of artificial metasurfaces and metamaterials. A new particle, the complementary split rings resonator, is proposed for the design of metasurfaces with high frequency selectivity and planar metamaterials with a negative dielectric permittivity. Applications in the fields of frequency selective surfaces and polarizers, as well as in microwave antennas and filter design, can be envisaged. The tunability of all these devices by an applied dc voltage is also achievable if these particles are etched on the appropriate substrate.

7 June 2004 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
Francisco FalconeFrancisco Falcone
Francisco Falcone
TLT. Lopetegi
T. Lopetegi
JBJ.D. Baena
J.D. Baena
RMR. Marques
R. Marques
Ferran MartinFerran Martin
Ferran Martin
MSM. Sorolla
M. Sorolla
In this letter a super-compact stopband microstrip structure is proposed. The frequency gap is produced by an array of complementary split ring resonators (CSRRs)-a concept proposed here for the first time-etched on the ground plane. This behavior is interpreted as due to the presence of a negative effective dielectric permittivity in the vicinity of resonance. The resulting device produces a deep rejection frequency band with sharp cutoff, and a pass band that exhibits very low losses and good matching. Due to the sub-lambda operation of CSRRs, the electrical size of the device is very small.

28 April 2020 in Sensors
Verified
Journal Article
Open access
PDF file
Hugo LandaluceHugo Landaluce
Hugo Landaluce
LALaura Arjona
Laura Arjona
APAsier Perallos
Asier Perallos
Francisco FalconeFrancisco Falcone
Francisco Falcone
IAIgnacio Angulo
Ignacio Angulo
FMFlorian Muralter
Florian Muralter
Radio frequency identification (RFID) and wireless sensors networks (WSNs) are two fundamental pillars that enable the Internet of Things (IoT). RFID systems are able to identify and track devices, whilst WSNs cooperate to gather and provide information from interconnected sensors. This involves challenges, for example, in transforming RFID systems with identification capabilities into sensing and computational platforms, as well as considering them as architectures of wirelessly connected sensing tags. This, together with the latest advances in WSNs and with the integration of both technologies, has resulted in the opportunity to develop novel IoT applications. This paper presents a review of these two technologies and the obstacles and challenges that need to be overcome. Some of these challenges are the efficiency of the energy harvesting, communication interference, fault tolerance, higher capacities to handling data processing, cost feasibility, and an appropriate integration of these factors. Additionally, two emerging trends in IoT are reviewed: the combination of RFID and WSNs in order to exploit their advantages and complement their limitations, and wearable sensors, which enable new promising IoT applications.

21 October 2020 in IEEE Access
Verified
Journal Article
Open access
Mohammad AlibakhshikenariMohammad Alibakhshikenari
Mohammad Alibakhshikenari
FBFatemeh Babaeian
Fatemeh Babaeian
Bal VirdeeBal Virdee
Bal Virdee
SASonia Aissa
Sonia Aissa
Leyre AzpilicuetaLeyre Azpilicueta
Leyre Azpilicueta
Ernesto LimitiErnesto Limiti
Ernesto Limiti
Nowadays synthetic aperture radar (SAR) and multiple-input-multiple-output (MIMO) antenna systems with the capability to radiate waves in more than one pattern and polarization are playing a key role in modern telecommunication and radar systems. This is possible with the use of antenna arrays as they offer advantages of high gain and beamforming capability, which can be utilized for controlling radiation pattern for electromagnetic (EM) interference immunity in wireless systems. However, with the growing demand for compact array antennas, the physical footprint of the arrays needs to be smaller and the consequent of this is severe degradation in the performance of the array resulting from strong mutual-coupling and crosstalk effects between adjacent radiating elements. This review presents a detailed systematic and theoretical study of various mutual-coupling suppression (decoupling) techniques with a strong focus on metamaterial (MTM) and metasurface (MTS) approaches. While the performance of systems employing antenna arrays can be enhanced by calibrating out the interferences digitally, however it is more efficient to apply decoupling techniques at the antenna itself. Previously various simple and cost-effective approaches have been demonstrated to effectively suppress unwanted mutual-coupling in arrays. Such techniques include the use of defected ground structure (DGS), parasitic or slot element, dielectric resonator antenna (DRA), complementary split-ring resonators (CSRR), decoupling networks, P.I.N or varactor diodes, electromagnetic bandgap (EBG) structures, etc. In this review, it is shown that the mutual-coupling reduction methods inspired By MTM and MTS concepts can provide a higher level of isolation between neighbouring radiating elements using easily realizable and cost-effective decoupling configurations that have negligible consequence on the array’s characteristics such as bandwidth, gain and radiation efficiency, and physical footprint.

24 November 2003 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
FMF. Martı́n
F. Martı́n
JBJ. Bonache
J. Bonache
Francisco FalconeFrancisco Falcone
Francisco Falcone
MSM. Sorolla
M. Sorolla
RMR. Marqués
R. Marqués
In this letter, a planar left-handed propagating medium consisting of a coplanar waveguide (CPW) inductively coupled to split ring resonators (SRR) and periodically loaded with narrow metallic wires is proposed. The wires make the structure behave as a microwave plasma with a negative effective permittivity which covers a broad frequency range. The negative permeability required to achieve left-handed wave propagation is provided by the rings in the vicinity of their resonant frequency. The result is a structure which allows negative wave propagation in a narrow frequency band. The transmission coefficient measured in a fabricated prototype device exhibits very low insertion losses in the pass band and high-frequency selectivity. Since rings are much smaller than signal wavelength at resonance and can be easily tuned, SRR-CPW-based structures are of interest for the design of very compact microwave circuits based on left handedness.