Dragon fruit is a tropical fruit with significant potential for consumers and producers. The quality assurance of this high-value product is crucial to satisfy consumer expectations. The quality of imported dragon fruit after storage may deteriorate due to inappropriate storage conditions. The firmness of dragon fruit is an essential parameter to estimate its conditions, and it is usually measured by destructive testing. The objective of the present study is to develop and test a non-destructive robotic sensor for assessing dragon fruit quality related to texture deterioration. Sixty white-fresh dragon fruits obtained from a store were divided in two sets of thirty fruits and stored 48 h at different conditions (cold and room storage) to produce deteriorated and consumer-acceptable fruits. First, the fruit samples were assessed non-destructive with the force sensor of a collaborative robot while they were touched. The robot tool is a pad capable of adapting and copying fruit shapes while controlling its hardness with the jamming transition of its internal granular fill. Second, the fruits were evaluated with destructive tests such as fruit firmness, flesh firmness, and soluble solid content. The procedure followed to produce deteriorated and acceptable fruits were confirmed. A discriminant analysis was carried out to segregate the fruit between the two categories according to the non-destructive variables extracted from the sensor. The variables obtained from the robotic first slope (S1) and the difference between the maximum value and the first overshoot (Os) were significant predictors for the separation in the two quality categories. Promising results were obtained with 77.50% of well classified fruit from the model data set, and 84.21% from the validation data set. The use of the robot could be an efficient tool in evaluating the quality of dragon fruit. This process may lead to substantial savings, particularly considering the elevated cost associated with the importation of tropical fruits into the European market.
The quality of okra is crucial in satisfying consumer expectations, and the tenderness of okra is an essential parameter in estimating its condition. However, the current methods for assessing okra tenderness are slow and prone to errors, necessitating the development of a better, non-destructive method. The objective of the present study is to develop and test a non-destructive robotic sensor for assessing okra freshness and tenderness. A total of 120 pods were divided into two sets and stored under different conditions: 60 pods were kept in a cold chamber for 24 h (considered tender), while the other 60 pods were stored at room temperature for two days. First, the samples were assessed non-destructively using the force sensor of a collaborative robot, where a jamming pad (with internal granular fill) was capable of adapting and copying the okra shapes while controlling its force deformation. Second, the okra pods were evaluated with the referenced destructive tests, as well as weight loss, compression, and puncture tests. In order to validate the differences in the tenderness of the two sets, a discriminant analysis was carried out to segregate the okra pods into the two categories according to the destructive variables, confirming the procedure which was followed to produce tender and non-tender okra pods. After the differences in the tenderness of the two sets were confirmed, the variables extracted from the robotic sensor (maximum force (Fmax), first slope (S1), second slope (S2), the first overshoot (Os), and the steady state (Ss)) were significant predictors for the separation in the two quality categories. Discriminant analysis and logistic regression methods were applied to classify the pods into the two tenderness categories. Promising results were obtained using neural network classification with 80% accuracy in predicting tenderness from the sensor data, and a 95.5% accuracy rate was achieved in distinguishing between tender and non-tender okra pods in the validation data set. The use of the robotic sensor could be an efficient tool in evaluating the quality of okra. This process may lead to substantial savings and waste reduction, particularly considering the elevated cost and challenges associated with transporting perishable vegetables.
Okra, a widely grown vegetable in many regions, often suffers from freshness loss during transportation, causing significant waste. Factors like variety, environment, maturity, and handling affect its quality. Current methods for checking okra tenderness are slow and prone to mistakes, so we need a better, non-damaging method. This study aims to use a device on a robot arm to assess okra freshness and tenderness. We tested 120 okra pods, storing some in a cold chamber for 24 hours (considered tender) and others at room temperature for two days before moving them to a cold environment for five more days (considered not tender). We used a force sensor on a robot arm to measure okra hardness without damaging it, then did tenderness tests. We found that certain sensor data, like the first slope (S1) and the difference between the maximum value and the first overshoot (Os), were good predictors of tenderness, with an accuracy rate of nearly 80%. We also validated this non-damaging method with weight loss, compression, and puncture tests, achieving a 95.5% accuracy rate in distinguishing between tender and non-tender okra pods.