The quality of okra is crucial in satisfying consumer expectations, and the tenderness of okra is an essential parameter in estimating its condition. However, the current methods for assessing okra tenderness are slow and prone to errors, necessitating the development of a better, non-destructive method. The objective of the present study is to develop and test a non-destructive robotic sensor for assessing okra freshness and tenderness. A total of 120 pods were divided into two sets and stored under different conditions: 60 pods were kept in a cold chamber for 24 h (considered tender), while the other 60 pods were stored at room temperature for two days. First, the samples were assessed non-destructively using the force sensor of a collaborative robot, where a jamming pad (with internal granular fill) was capable of adapting and copying the okra shapes while controlling its force deformation. Second, the okra pods were evaluated with the referenced destructive tests, as well as weight loss, compression, and puncture tests. In order to validate the differences in the tenderness of the two sets, a discriminant analysis was carried out to segregate the okra pods into the two categories according to the destructive variables, confirming the procedure which was followed to produce tender and non-tender okra pods. After the differences in the tenderness of the two sets were confirmed, the variables extracted from the robotic sensor (maximum force (Fmax), first slope (S1), second slope (S2), the first overshoot (Os), and the steady state (Ss)) were significant predictors for the separation in the two quality categories. Discriminant analysis and logistic regression methods were applied to classify the pods into the two tenderness categories. Promising results were obtained using neural network classification with 80% accuracy in predicting tenderness from the sensor data, and a 95.5% accuracy rate was achieved in distinguishing between tender and non-tender okra pods in the validation data set. The use of the robotic sensor could be an efficient tool in evaluating the quality of okra. This process may lead to substantial savings and waste reduction, particularly considering the elevated cost and challenges associated with transporting perishable vegetables.
The increasing demand for high-quality dragon fruit in the European market requires efficient quality assessment methods. This study explores a non-destructive image analysis approach for classifying ripe dragon fruits based on fruit ripeness and weight. A low-cost system equipped with visible and ultraviolet lighting was employed to capture images of two sets of samples of 60 and 92 ripe dragon fruits, extracting non-destructive parameters such as visible and ultraviolet perimeter, maximum and minimum diameter and area, and RGB color coordinates. Fruit destructive characterization parameters were also measured. The first set of samples was used to develop a discriminant classification model. In a first step, the main characterization magnitudes were confirmed. A ripening index was calculated based on soluble solid content and acidity. Then, a cluster analysis was used to segregate the fruits into three quality characteristics based on the ripening index and weight. In a second step, a step-by-step discriminant analysis was conducted to classify the fruits into the three quality categories (based on the laboratory-measured weight, soluble solid content and total acidity) using the non-destructive magnitudes extracted from the image analysis. The proposed classification system achieved an accuracy of nearly 85% of well-classified dragon fruits, effectively segregating dragon fruits into the three established categories. Furthermore, the established model could select the very high-quality dragon fruit (riper and larger fruits) with 93% of correctly identified products. A comparable procedure was subsequently applied to the additional set of samples (set 2), obtaining consistent results and confirming that image analysis magnitudes related to size and color enable fruit classification into the predefined weight- and ripeness-based categories. Compared to conventional destructive methods, this non-destructive approach offers a promising, cost-effective, and reliable solution for quality assessment. The findings highlight the potential for integrating smart technologies into fruit classification processes, during automatic harvest and postharvest operations, ultimately improving efficiency, reducing labor costs, and enhancing product consistency in the dragon fruit industry.
Okra, a widely grown vegetable in many regions, often suffers from freshness loss during transportation, causing significant waste. Factors like variety, environment, maturity, and handling affect its quality. Current methods for checking okra tenderness are slow and prone to mistakes, so we need a better, non-damaging method. This study aims to use a device on a robot arm to assess okra freshness and tenderness. We tested 120 okra pods, storing some in a cold chamber for 24 hours (considered tender) and others at room temperature for two days before moving them to a cold environment for five more days (considered not tender). We used a force sensor on a robot arm to measure okra hardness without damaging it, then did tenderness tests. We found that certain sensor data, like the first slope (S1) and the difference between the maximum value and the first overshoot (Os), were good predictors of tenderness, with an accuracy rate of nearly 80%. We also validated this non-damaging method with weight loss, compression, and puncture tests, achieving a 95.5% accuracy rate in distinguishing between tender and non-tender okra pods.
The increasing demand for high-quality dragon fruit in the European market requires efficient quality assessment methods. This study explores a non-destructive image analysis approach for classifying ripe dragon fruits based on fruit ripeness and weight. A low-cost system equipped with visible and ultraviolet lighting was employed to capture images of 60 ripe dragon fruits over a storage period, extracting parameters such as visible and ultraviolet perimeter, maximum and minimum diameter and area, and RGB color coordinates. In a first step, the main characterization magnitudes were confirmed. A ripening index was calculated based on soluble solid content and acidity. Then, a cluster analysis was used to segregate the fruits into three quality characteristics based on the ripening index and weight. In a second step, a step-by-step discriminant analysis was conducted to classify the fruits into the three quality categories (based on the laboratory measured weight, soluble solid content and total acidity) using the non-destructive magnitudes extracted from the image analysis. The proposed classification system achieved an accuracy of nearly 85 \% of well classified dragon fruits, effectively segregating dragon fruits into the three established categories. urthermore, the established model could select the very high-quality dragon fruit (riper and larger fruits) with 93 \% of correctly dentified products.Compared to conventional destructive methods, this non-destructive approach offers a promising, cost-effective, and reliable solution for quality assessment. The findings highlight the potential for integrating smart technologies into fruit classification processes, during automatic harvest and postharvest operations, ultimately improving efficiency, reducing labor costs, and enhancing product consistency in the dragon fruit industry.