In this paper we present a prototype instrument for remote open-path detection of nitrous oxide. The sensor is based on a 4.53 μm quantum cascade laser and uses the chirped laser dispersion spectroscopy (CLaDS) technique for molecular concentration measurements. To the best of our knowledge this is the first demonstration of open-path laser-based trace-gas detection using a molecular dispersion measurement. The prototype sensor achieves a detection limit down to the single-ppbv level and exhibits excellent stability and robustness. The instrument characterization, field deployment performance, and the advantages of applying dispersion sensing to sensitive trace-gas detection in a remote open-path configuration are presented.

In this paper we report a mid-infrared sensor based on an anti-resonant hollow core fiber. A quantum cascade laser operating around 4.53 µm is used to target one of the strongest transition of nitrous oxide near 2203.7 cm⁻¹. The system provides 1-second minimum detection limit at single parts-per-billion level using 3.2-m-long fiber with the response time of less than 30 seconds. Presented sensing approach shows a good perspective for compact and sensitive mid-infrared fiber-based spectrometers.

A laser-based spectrometer exploiting a novel Kagome-type hollow core photonic crystal fiber, which serves as a gas cell is demonstrated. Low attenuation of this silica-based fiber in the 3.4 µm wavelength region enables accessing strong, fundamental transitions of methane, which was used as a target analyte in the presented experiment. With an all-fiber differential frequency generation source combined with wavelength modulation spectroscopy technique detection limit at single parts-per-million by volume level was obtained. These results show potential for developing compact and sensitive Kagome-fiber-based mid-infrared laser spectrometers.

Both intensity- (IM) and frequency-modulation (FM) behavior of a directly modulated quantum cascade laser (QCL) are measured from 300 Hz to 1.7 GHz. Quantitative measurements of tuning coefficients has been performed and the transition from thermal- to electronic-tuning is clearly observed. A very specific FM behavior of QCLs has been identified which allows for optical quasi single sideband (SSB) modulation through current injection and has not been observed in directly modulated semiconductor lasers before. This predestines QCLs in applications where SSB is required, such as telecommunication or high speed spectroscopy. The experimental procedure and theoretical modeling for data extraction is discussed.