Alexander Ospennikov

Mr. Alexander Ospennikov


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 November 2024 in Gels
Verified
Journal Article
Open access
PDF file
AOAlexander Ospennikov
Alexander Ospennikov
YCYury Chesnokov
Yury Chesnokov
ASAndrey Shibaev
Andrey Shibaev
BLBoris V. Lokshin
Boris V. Lokshin
Olga PhilippovaOlga Philippova
Olga Philippova
Bio-based eco-friendly cellulose nanocrystals (CNCs) gain an increasing interest for diverse applications. We report the results of an investigation of hydrogels spontaneously formed by the self-assembly of carboxylated CNCs in the presence of CaCl2 using several complementary techniques: rheometry, isothermal titration calorimetry, FTIR-spectroscopy, cryo-electron microscopy, cryo-electron tomography, and polarized optical microscopy. Increasing CaCl2 concentration was shown to induce a strong increase in the storage modulus of CNC hydrogels accompanied by the growth of CNC aggregates included in the network. Comparison of the rheological data at the same ionic strength provided by NaCl and CaCl2 shows much higher dynamic moduli in the presence of CaCl2, which implies that calcium cations not only screen the repulsion between similarly charged nanocrystals favoring their self-assembly, but also crosslink the polyanionic nanocrystals. Crosslinking is endothermic and driven by increasing entropy, which is most likely due to the release of water molecules surrounding the interacting COO− and Ca2+ ions. The hydrogels can be easily destroyed by increasing the shear rate because of the alignment of rodlike nanocrystals along the direction of flow and then quickly recover up to 90% of their viscosity in 15 s, when the shear rate is decreased.

19 November 2025 in Gels
Verified
Journal Article
Open access
PDF file
AOAlexander Ospennikov
Alexander Ospennikov
AKAlexander L Kwiatkowski
Alexander L Kwiatkowski
Olga PhilippovaOlga Philippova
Olga Philippova
Plant-derived nanocellulose particles, such as cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs), are becoming increasingly popular for a wide range of applications. In particular, when they are employed as rheology modifiers and/or fillers, a choice between CNFs and CNCs is often not obvious. Here, we present the results of a comparative study on the rheological properties of suspensions and gels of carboxymethylated CNFs and CNCs with the same surface chemistry, surface density of charged groups, and thickness. We demonstrate that, at the same weight concentration, CNF suspensions have much higher viscosity and storage modulus, which is due to their longer length providing many entanglements. However, when comparing at the same nanoparticle concentration relative to C*, the situation is reversed: viscosity and storage modulus of CNCs appear to be much higher. This may be due in particular to the higher rigidity and intrinsic strength of highly crystalline CNCs. The gel points for CNF and CNC suspensions (without crosslinker) were compared for the first time. It was found that in the case of CNFs, the gel point occurs at a 3.5-fold lower concentration compared to that of CNCs. Hydrogels were also obtained by crosslinking negatively charged nanocellulose particles of both types by divalent calcium cations. For the first time, the thermodynamic parameters of the crosslinking of carboxymethylated CNFs by calcium ions were determined. Isothermal titration calorimetry data revealed that, for both CNFs and CNCs, crosslinking is endothermic and driven by increasing entropy, which is most likely due to the release of water molecules surrounding the interacting nanoparticles and Ca2+ ions. The addition of CaCl2 to suspensions of nanocellulose particles leads to an increase in the storage modulus; the increase being much more significant for CNCs. Physically crosslinked hydrogels of both CNFs and CNCs can be reversibly destroyed by increasing the shear rate and then quickly recover up to 85% of their original viscosity when the shear rate decreases. The recovery time for CFC networks is only 6 s, which is much shorter than that of CNC networks. This property is promising for various applications, where nanocellulose suspensions are subjected to high shear forces (e.g., mixing, stirring, extrusion, injection, coating) and then need to regain their original properties when at rest.

14 December 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
ASAndrey Shibaev
Andrey Shibaev
AOAlexander Ospennikov
Alexander Ospennikov
EKElizaveta K. Kuznetsova
Elizaveta K. Kuznetsova
AKAlexander Kuklin
Alexander Kuklin
TATseimur Aliyeu
Tseimur Aliyeu
Olga PhilippovaOlga Philippova
Olga Philippova
Wormlike surfactant micelles are widely used in various applications including fracturing technology in oil industry, template synthesis of different nanoobjects, micellar copolymerization of hydrophilic and hydrophobic monomers, and so forth. Most of those applications suggest the solubilization of different additives in the micelles. The present paper is aimed at the comparative study of the effect of the solubilization of hydrophobic (n-decane and 1-phenylhexane) and hydrophilic (N-isopropylacrylamide and acrylamide) substances on the rheological properties and structure of the micelles using several complementary techniques including rheometry, small angle neutron scattering, dynamic light scattering, and diffusion ordered NMR spectroscopy. For these studies, mixed micelles of potassium oleate and n-octyltrimethylammonium bromide containing the excess of either anionic or cationic surfactants were used. It was shown that hydrophobic additives are completely solubilized inside the micelles being localized deep in the core (n-decane, 1-phenylhexane) or near the core/corona interface (1-phenylhexane). At the same time, only a small fraction of hydrophilic additives (14% of N-isopropylacrylamide and 4% of acrylamide) penetrate the micelles being localized at the corona area. Despite different localization of the additives inside the micelles, all of them induce the breaking of wormlike micelles with the formation of either ellipsoidal microemulsion droplets (in the case of hydrophobic additives) or ellipsoidal surfactant micelles (in the case of hydrophilic additives). The breaking of micelles results in the drop of viscosity of the solution up to water value. The main result of this paper consists in the observation of the fact that for all the additives under study, the dependences of the viscosity on the volume fraction of additive lie on the same master curve being shifted along the volume fraction axis by a certain factor depending on the hydrophobicity of the added species. Those data are quite useful for various applications of wormlike surfactant micelles suggesting the solubilization of different additives inside them.

Verified
Journal Article
Open access
PDF file
AOAlexander Ospennikov
Alexander Ospennikov
ASAndrey Shibaev
Andrey Shibaev
Olga PhilippovaOlga Philippova
Olga Philippova
Double crosslinked hydrogels based on a biodegradable polymer were prepared by photocopolymerization of methacrylated hydroxypropyl guar (HPG-MA) and 3-acrylamidophenylboronic acid. Along with irreversible strong covalent crosslinks by methacrylic groups, these hydrogels contained labile boronate crosslinks formed as a result of the interaction of boronic acid with cis-diol moieties of HPG. These hydrogels demonstrated higher elasticity than HPG-MA hydrogels with only irreversible covalent crosslinks. Labile boronate crosslinks not only strengthened the hydrogels but also imparted to them pronounced responsive properties. It was demonstrated that the mechanical properties, the swelling behavior, as well as the uptake and release of some substances from the double crosslinked hydrogel were pH controlled. For instance, the hydrogels could release cationic disinfectant at a rate regulated by pH. Such photocrosslinkable in situ forming hydrogels are very promising for the production of smart coatings that release targeted substances at the desired rate.