Zahra Parsa

Ms. Zahra Parsa


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 February 2024 in Bioengineering
Verified
Journal Article
Open access
PDF file
ZPZahra Parsa
Zahra Parsa
RDRamadan Dhiab
Ramadan Dhiab
Mehrab MehrvarMehrab Mehrvar
Mehrab Mehrvar
This review emphasizes the significance of formulating control strategies for biological and advanced oxidation process (AOP)-based wastewater treatment systems. The aim is to guarantee that the effluent quality continuously aligns with environmental regulations while operating costs are minimized. It highlights the significance of understanding the dynamic behaviour of the process in developing effective control schemes. The most common process control strategies in wastewater treatment plants (WWTPs) are explained and listed. It is emphasized that the proper control scheme should be selected based on the process dynamic behaviour and control goal. This study further discusses the challenges associated with the control of wastewater treatment processes, including inadequacies in developed models, the limitations of most control strategies to the simulation stage, the imperative requirement for real-time data, and the financial and technical intricacies associated with implementing advanced controller hardware. It is discussed that the necessity of the availability of real-time data to achieve reliable control can be achieved by implementing proper, accurate hardware sensors in suitable locations of the process or by developing and implementing soft sensors. This study recommends further investigation on available actuators and the criteria for choosing the most appropriate one to achieve robust and reliable control in WWTPs, especially for biological and AOP-based treatment approaches.

17 August 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
ZPZahra Parsa
Zahra Parsa
RDRamadan Dhiab
Ramadan Dhiab
Mehrab MehrvarMehrab Mehrvar
Mehrab Mehrvar
Implementing efficient and cost-effective wastewater treatment methods in wastewater treatment plants (WWTPs) is crucial for ensuring sustainable development in contemporary societies. This study explores the feasibility of a continuous UV/H2O2 tubular photoreactor as a pre-treatment to enhance the biodegradability of aqueous polyvinyl alcohol (PVA) solutions, known as a nonbiodegradable wastewater. Using a combination of a Box–Behnken design (BBD) and the response surface methodology (RSM), three main process variables, including the PVA feed concentration, the inlet H2O2 concentration, and the PVA feed flow rate, are studied within ranges of 500–1500 mg/L, 390–780 mg/L, and 50–150 mL/min, respectively. The results show significant interaction effects between the PVA feed and inlet H2O2 concentrations on the effluent BOD5/COD ratio. The optimal operating conditions are determined using the RSM, with a PVA feed concentration of 665 mg/L, an inlet H2O2 concentration of 390 mg/L, and a PVA feed flow rate of 59 mL/min. Operating at this point leads to an increase in the effluent BOD5/COD ratio from 0.15 to 0.53, which is validated experimentally with a ±5% error. Under these conditions, the effluent demonstrates an enhanced biodegradability, allowing for redirection to a subsequent biological post-treatment phase. This study demonstrates that using the UV/H2O2 process to enhance the biodegradability of an aqueous PVA solution is more economical than focusing on the complete removal of total organic carbon (TOC). Also, a comparison of these results with those of our previous study indicates that wastewater becomes more biodegradable by progressing the UV/H2O2 process due to the breakdown of polymer molecules, which reduces their molecular weight and makes them more consumable for biomass.

4 May 2025 in The Canadian Journal of Chemical Engineering
Verified
Journal Article
Open access
ZPZahra Parsa
Zahra Parsa
RDRamdhane Dhib
Ramdhane Dhib
Mehrab MehrvarMehrab Mehrvar
Mehrab Mehrvar
The performance of a continuous pilot‐scale UV/H 2 O 2 photoreactor for the degradation of aqueous polyvinyl alcohol (PVA) is studied. The process variables include PVA feed concentration, inlet H 2 O 2 concentration, and hydraulic retention time (HRT), ranging from 20 to 100 mg/L, 2 to 115 mg/L, and 5 to 25 min, respectively. Interactive effects of the input variables on the percentage of total organic carbon (TOC) removal, residual H 2 O 2 concentration, and effluent pH are analyzed using Latin hypercube sampling (LHS), quadratic modelling, and response surface methodology (RSM) in MATLAB and Design Expert. The process analysis determined optimal operating conditions of 22 mg/L PVA feed, 15 mg/L inlet H 2 O 2 concentration, and 24 min HRT, yielding a maximum TOC removal of 51.51% and a residual H 2 O 2 concentration of 5 mg/L. Despite previous studies, online pH and H 2 O 2 sensors are used in the experimental setup. A key novelty of this study is the identification and validation of reliable online indicators for parameters that cannot be measured online, enabling real‐time process monitoring and control. Specifically, UV absorbance of PVA feed solutions at 254 nm (UVA) exhibits a strong dependence on the PVA feed concentration, making it a reliable online indicator for monitoring PVA levels in the feed. Additionally, indicating a linear correlation between effluent pH and %TOC removal, with an R 2 value of 0.9886, suggests that effluent pH could serve as a reliable real‐time indicator of process removal performance. These findings highlight the potential of real‐time monitoring and optimization of UV/H 2 O 2 systems in large‐scale wastewater treatment applications.

4 December 2025 in Water
Verified
Journal Article
Open access
PDF file
CCChao Chang
Chao Chang
Mehrab MehrvarMehrab Mehrvar
Mehrab Mehrvar
ZPZahra Parsa
Zahra Parsa
Sulfanilic acid (SA) is a representative sulfonated aromatic amine commonly found in industrial effluents, posing significant risks to both human health and the ecosystem. Efficient and cost-effective treatment of SA-containing wastewater is crucial for sustainable environmental management. This study investigates the performance of the photo-Fenton process in degrading SA-containing wastewater. Three process variables are selected to study their effects on percent total organic carbon (%TOC) removal and final pH (pHFinal): initial total organic carbon concentration (TOC0) (150–250 mg/L), Fe2+ concentration (15–85 mg/L), and H2O2 concentration (1000–1500 mg/L). A combination of response surface methodology (RSM) and Box-Behnken design (BBD) is applied to examine both the individual and interactive effects of these variables. A total of 15 experimental trials are conducted, with the center point repeated three times. The results indicate significant interaction effects between Fe2+ and H2O2 concentrations on %TOC removal, while the interaction between TOC0 and H2O2 concentration notably influences pHFinal. The optimal operating parameters to maximize %TOC removal within 45 min of operation are determined as a TOC0 of 54.2 mg/L, an Fe2+ catalyst concentration of 33.7 mg/L, and an H2O2 concentration of 1403 mg/L. Under these conditions, the predicted %TOC removal and pHFinal were 89.2% and 2.93, respectively, which confirmed through validation experiments. Additionally, a correlation between pHFinal, TOC0, and final TOC concentration (TOCFinal) is observed, leading to the development of a linear model capable of predicting TOCFinal based on TOC0 and pHFinal within the experimental space. The latter finding facilitates online monitoring of the process progress.