The pressure-volume diagram (p−V diagram) is an established method for analyzing the thermodynamic process in the cylinder of a reciprocating compressor as well as the fault of its core components including valves. The failure of suction/discharge valves is the most common cause of unscheduled shutdowns, and undetected failure may lead to catastrophic accidents. Although researchers have investigated fault classification by various estimation techniques and case studies, few have looked deeper into the barriers and pathways to realize the level determination of faults. The initial stage of valve failure is characterized in the form of mild leakage; if this is identified at this period, more serious accidents can be prevented. This study proposes a fault diagnosis and severity estimation method of the reciprocating compressor valve by virtue of features extracted from the p−V diagram. Four-dimensional characteristic variables consisting of the pressure ratio, process angle coefficient, area coefficient, and process index coefficient are extracted from the p−V diagram. Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) were applied to establish the diagnostic model, where PCA realizes feature amplification and projection, then LDA implements feature dimensionality reduction and failure prediction. The method was validated by the diagnosis of various levels of severity of valve leakage in a reciprocating compressor, and further, applied in the diagnosis of two actual faults: Mild leakage caused by the cracked valve plate in a reciprocating compressor, and serious leakage caused by the deformed valve in a hydraulically driven piston compressor for a hydrogen refueling station (HRS).

Ensuring the reliability of process gas compressors is critical for underground gas storage, as piston rod fractures can lead to serious accidents, such as natural gas leaks or explosions. On-time monitoring and early detection play a vital role in preventing catastrophic consequences, minimising costs, and reducing production losses due to unplanned downtime. This study presents a novel accelerated life-testing method designed to replicate the fracture events of reciprocating compressor piston rods. By accelerating the induced crack initiation and propagation to the final fracture, comprehensive analyses of the fracture results are performed to reveal the piston rod fracture mechanism and the resulting secondary damage to the unit. The research further presents an innovative approach for identifying piston rod crack propagation by means of acoustic emission. Through kinetic analysis and time–frequency domain analysis, the study elucidates two mechanisms responsible for triggering crack signals during the compressor operation: the contact impact between the crosshead pin and the bearing due to the piston rod load reversal, and crack propagation occurring before the maximum tensile load is reached. In addition, the study identifies the piston rod crack expansion signal frequency band and achieves a high-sensitivity identification of crack dynamic growth by extracting signal sub-band features associated with crack propagation. Then, a prediction model of the fatigue crack growth rate was established based on the AE energy release rate, which provides a quantitative assessment of dynamic crack propagation during compression. This method aims to provide a maintenance strategy for piston rod fractures, thereby increasing the operational safety of critical dynamic equipment in underground gas storage.