Liquid-repellent surfaces, such as superhydrophobic surfaces, superoleophobic surfaces, and slippery liquid-infused surfaces, have drawn keen research interest from the communities engaged in chemical synthesis, interfacial chemistry, surface engineering, bionic manufacturing and micro-nano machining. This is due to their great potential applications in liquid-proofing, self-cleaning, chemical resistance, anti-icing, water/oil remediation, biomedicine, etc. However, poor robustness and durability that notably hinders the real-world applications of such surfaces remains their Achilles heel. The past few years have witnessed rapidly increasing publications that address the robustness and durability of liquid-repellent surfaces, and many breakthroughs have been achieved. This review provides an overview of the recent progress made towards robust and durable liquid-repellent surfaces. First, we discuss the wetting of solid surface and its generally-adopted characterisation methods, and introduce typical liquid-repellent surfaces. Second, we focus on various evaluation methods of the robustness and durability of liquid-repellent surfaces. Third, the recent advances in design and fabrication of robust and durable liquid-repellent surfaces are reviewed in detail. Fourth, we present the applications where these surfaces have been employed in fields like chemistry, engineering, biology and in daily life. Finally, we discuss the possible research perspectives in robust and durable liquid-repellent surfaces. By presenting such state-of-the-art of this significant and fast-developing area, we believe that this review will inspire multidisciplinary scientific communities and industrial circles to develop novel liquid-repellent surfaces that can meet the requirements of various real-world applications.

Many advanced materials are designed for separation of immiscible oils/organic solvents and aqueous solutions, including poly(vinylidene fluoride) (PVDF)‐based materials with superwettability. However, due to the limited solubility of PVDF, techniques (e.g., phase inversion and electrospinning) often involve the use of toxic organic solvents. Here a facile organic solvent‐free method is described to prepare a porous PVDF–MWCNT (multiwalled carbon nanotube) foam using table salt as a sacrificial template. The porous PVDF–MWCNT foam is characterized as superhydrophobic–superoleophilic with good elasticity due to its 3D porosity and low surface energy. The foam exhibits high adsorption capacity to a variety of oils/organic solvents and can be easily reused by squeezing, heating, or releasing in other solvents. Moreover, the foam is highly resistant toward UV exposure, corrosive aqueous solutions such as acidic, alkaline, salty solutions, and turbulent environments, and shows effective oils/organic solvents removal in these complex environments. The continuous separation of immiscible oils/organic solvents and corrosive aqueous solutions with vacuum assistance is also presented. The organic solvent‐free and reusable PVDF–MWCNT foam is a promising candidate for large‐scale industrial separation of oils/organic solvents and water in corrosive and turbulent conditions.

A simple and inexpensive two-step immersion method is reported to make mild steel superhydrophobic. Micro–nano-scale roughness and surface chemistry modifications were created via immersing mild steel into a salt solution followed by treatment with a low surface-energy polymer. The fabricated mild steel has water contact angles greater than 150° and remarkable water bouncing properties. This method was also used to treat a mild steel mesh for oil–water separation. In this paper, a new, facile and reusable gravity-induced separation system is proposed to collect floating oil, the oil collection rate can reach >96%.

Robust superamphiphobic coatings fabricated by a facile chemical deposition and low surface energy modification were coated on both hard and soft materials to repel water and oils.