Hao Huang

Dr. Hao Huang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 October 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
JZJinli Zhu
Jinli Zhu
YLYuan Li
Yuan Li
FPFang Z. Peng
Fang Z. Peng
BLBrad Lehman
Brad Lehman
Hao HuangHao Huang
Hao Huang
More-electric and pure-electric ship and aircraft, and electric-grid power systems include three subsystems: generation (generators and inverter-based renewable energy sources), delivery (transmission & distribution lines and cables, transformers, capacitor banks, inductors), and energy storage. Therefore, power systems are dominantly inductive and capacitive. Resistors are rarely used, and circuits are designed and built with minimal resistance to minimize power loss and maximize efficiency. Due to this nature, however, there have been problematic resonances, instability, and prolonged transients. To solve these problems, power converters/inverters were first presented in the 1980s as active, lossless, and virtual resistors to suppress/damp resonances, instability, and transients. In this paper, we provide a comprehensive review of this innovative power converter/inverter-based technology from the active resistor to lossless and virtual resistors. We present theoretical analysis and insights about their interrelationship and physical meanings; discuss their implementation constraints; and examine broader applications and renewed potentials to revolutionize today’s power/energy grids.

22 September 2022 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
ASAnil Kumar Reddy Siddavatam
Anil Kumar Reddy Siddavatam
Kaushik RajashekaraKaushik Rajashekara
Kaushik Rajashekara
RRRavi Prakash Reddy
Ravi Prakash Reddy
Hao HuangHao Huang
Hao Huang
HKHarish S. Krishnamoorthy
Harish S. Krishnamoorthy
FWFred Wang
Fred Wang
This paper introduces two electrical architectures for electric/ hybrid-electric aircraft propulsion systems to address the issues of the radial baseline architecture, where a single bus feeds the four propulsion motors. A fault on this bus results in complete isolation of the bus to which propulsion motors are connected. By using the proposed architectures, the fault can be isolated without having to disconnect all the propulsion motors. This would increase the reliability, redundancy, and robustness of the electrical system, and/or avoid oversizing the components present in the architecture. In this paper, the protection strategy and action of circuit breakers are discussed for different fault conditions. The enhanced fault-tolerant operation of the proposed architectures over the existing radial baseline architecture for the electrified aircraft propulsion (EAP) system is validated for both open circuit and short circuit faults at different locations in the system, using controller hardware in the loop results obtained using typhoon HIL testbed. Furthermore, the feasibility analysis of interconnecting the individual propulsion channels to reduce the over-sizing of components is also discussed.

8 September 2024 in World Electric Vehicle Journal
Verified
Journal Article
Open access
PDF file
Hao HuangHao Huang
Hao Huang
Kaushik RajashekaraKaushik Rajashekara
Kaushik Rajashekara
Until recently, electrified aircraft propulsion (EAP) technology development has been driven by the dual objectives of reducing greenhouse gas (GHG) emissions and addressing the depletion of fossil fuels. However, the increasing severity of climate change, posing a significant threat to all life forms, has resulted in the global consensus of achieving net-zero GHG emissions by 2050. This major shift has alerted the aviation electrification industry to consider the following: What is the clear path forward for EAP technology development to support the net-zero GHG goals for large commercial transport aviation? The purpose of this paper is to answer this question. After identifying four types of GHG emissions that should be used as metrics to measure the effectiveness of each technology for GHG reduction, the paper presents three significant categories of GHG reduction efforts regarding the engine, evaluates the potential of EAP technologies within each category as well as combinations of technologies among the different categories using the identified metrics, and thus determines the path forward to support the net-zero GHG objective. Specifically, the paper underscores the need for the aviation electrification industry to adapt, adjust, and integrate its EAP technology development into the emerging new engine classes. These innovations and collaborations are crucial to accelerate net-zero GHG efforts effectively.

Verified
Journal Article
Open access
PDF file
ASAnil Kumar Reddy Siddavatam
Anil Kumar Reddy Siddavatam
Kaushik RajashekaraKaushik Rajashekara
Kaushik Rajashekara
Hao HuangHao Huang
Hao Huang
FWFred Wang
Fred Wang
The current trend in distributed electric aircraft propulsion systems is to utilize the DC bus system at higher voltage levels than conventional aircraft systems. With Boeing and Airbus utilizing the +/−270 V bipolar DC bus system, the research on high-voltage systems is increasing gradually, with voltage levels ranging from 1 to 10 kV systems or +/−0.5 to +/−5 kV DC bus systems. These voltage levels present considerable challenges to the distributed electric aircraft propulsion systems. In addition to partial discharge effects, there are other challenges, particularly the challenge associated with effectively limiting short-circuit fault currents due to the low cable impedance of the distribution system. The cable impedance is a significant factor that determines the fault current during fault conditions. Due to the low impedance, there is a sharp increase in fault current, necessitating an enhanced protection strategy, which ensures that the system is adequately protected. This paper introduces a coordinated protection strategy specifically designed for distributed electric aircraft propulsion systems to mitigate or prevent short-circuit faults. The proposed algorithm utilizes an I2t-based strategy and the current-limiting-based strategy to protect the system from short-circuit faults and overload conditions. Redundant backup protection is also included in the algorithm in case the circuit breaker fails to operate.

13 April 2026 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
LTLeon M. Tolbert
Leon M. Tolbert
FPFang Z. Peng
Fang Z. Peng
SFShiyuan Fan
Shiyuan Fan
Hao HuangHao Huang
Hao Huang
BLBrad Lehman
Brad Lehman
YLYuAnn Li
YuAnn Li
Reactive power minimization has long served as a strategy to reduce total system current and losses, yet existing theories define reactive power only over time or space – not both. This paper further develops the recently proposed spacetime pq theory – a mathematical formulation that generalizes reactive power as a geometric quantity spanning both space (multiple components) and time (multiple instants). The theory introduces a geometric decomposition of reactive power into spatial, temporal, and spacetime elements – revealing a previously unmodeled term. This latter spacetime element resolves long-standing inconsistencies between instantaneous power-based and RMS based or energy-based theories. By employing the wedge product, a structure from differential geometry, this theory unifies conventional definitions and reveals new insight into apparent power, energy storage, and power losses in ac, dc, and hybrid systems.