3 May 2018 in IEEE Transactions on Sustainable Energy
This paper presents a new analog ensemble method for day-ahead regional photovoltaic (PV) power forecasting with hourly resolution. By utilizing open weather forecast and power measurement data, this prediction method is processed within a set of historical data with similar meteorological data (temperature and irradiance), and astronomical date (solar time and earth declination angle). Further, clustering and blending strategies are applied to improve its accuracy in regional PV forecasting. The robustness of the proposed method is demonstrated with three different numerical weather prediction models, the North American Mesoscale Forecast System, the Global Forecast System, and the Short-Range Ensemble Forecast, for both region level and single site level PV forecasts. Using real measured data, the new forecasting approach is applied to the load zone in Southeastern Massachusetts as a case study. The normalized root mean square error (NRMSE) has been reduced by 13.80%-61.21% when compared with three tested baselines.
22 December 2017 in IEEE Transactions on Energy Conversion
The paper presents an intelligent based fault tolerant system for a solar Photovoltaic (PV) inverter. Artificial Neural Network (ANN) based controller is used to monitor, detect and diagnose the faults in solar PV panels, battery, semiconductor switches and inverters. The Cascaded Multilevel Inverter (CMI) is connected across the combination of solar PV panel and battery for DC-AC conversion. The major advantage of the proposed topology is that it can deliver power from source to the load even under fault and partial shaded conditions. The paper also reviews on various faults in the solar PV energy conversion process and provides suitable solutions for each circumstance. Simulations are undertaken in MATLAB 2016a/Simulink and experimental investigation is carried out for a 3kWp solar PV system. The results have proven that the system is capable to deliver power in spite of faulty environments. The comparison and discussion of the results were made to show the effectiveness of the proposed system.
8 June 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Canonical switching cell is known as the basic building block of dc-dc buck, boost, buck-boost, Ćuk converters, voltage/current source inverters as well as multilevel converters. This paper reveals the existence of another basic switching cell as a singular structure of the canonical switching cell. The proposed new basic cell can constitute SEPIC, Zeta converters, and Z-source converters. Each of the basic switching cells has the simplest form with two complementary switches, one inductor and one capacitor. An approach to construct a dc-dc converter by connecting source/load to the basic switching cells’ terminals is demonstrated. Some existing topologies of dc-dc converters are correlated following the proposed approach. Further, this paper reviews Z-source/ quasi-Z-source converters, universal converters, and multiple-source converters to uncover some general approaches for topology manipulating. Z-source/quasi-Z-source converters and the emerging classes of universal converters are used as examples to demonstrate the incorporation of their switches. Multiple source converters are fabricated by combining basic switching cells, in both the voltage source and current source form, using the duality principle. With the ever-increasing research efforts on converter topologies, it is hoped that this paper will improve the understanding of the existing converter relationships and inspire insights for new topological developments and applications.
23 February 2022 in IEEE Transactions on Industry Applications
Nonisolated dc–dc converterswith multi-inputfeatures are very popular in the area of hybrid energy integration since they are compact and cost efficient compared to the isolated topologies. A dual-input hybrid step-up dc–dc converter (DIHDC) with a compact structure is introduced in this article. DIHDC operates based on the switched inductor technique. DIHDC has two inductors with equal values that are parallelly energized in the initial working modes (i.e., switch on condition) and dissipates the stored energy in series in the final working mode (switch off condition). Also, the proposed converter can be extended up to multiple inputs with slight modifications in the structure. Simple and compact structure, relatively higher efficiency, and good voltage conversion ratio are the potential merits of the new converter. Analysis of DIHDC in steady-state condition is explained elaborately and the simulation results are presented. Detailed dynamic analysis of the converter has been performed based on the small signal model of the converter and the necessary transfer functions are derived. A laboratory scale converter model is developed to confirm the efficient operation of DIHDC in realistic environments.
4 March 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper provides a systematic method to construct types of quadratic converters. A 3-terminal, 4-element switching cell, consisting of 1 diode, 1 switch, 1 capacitor and 1 inductor, is inserted into a separated conventional switching cell to create the quadratic converter. Detailed steps of the proposed method are described. Almost all the known non-isolated quadratic converters with two inductors, two capacitors, two power switches and two diodes (or one power switch and three diodes) can be re-developed by this method, but also many new topologies can be proposed. For example, the 3-terminal, 4-element switching cells can be inserted into SEPIC, CUK and ZETA converters in different ways to derive different types of quadratic topologies. Further, the proposed method can be extended to generate cubic or nth-power converters. Many of these quadratic converters are compared in terms of their DC gain, number of switches and diodes, voltage stress on the switches, character of input current, output polarity, and so on. The selection procedure to determine which quadratic converter might be used for different applications is presented. Finally, to demonstrate the generality of the approach, a new type of quadratic converter is derived and evaluated in both simulation and experiment.