Based on the demand for high-power output, a spatial beam combining 7-channel quantum cascade lasers (QCLs) is demonstrated in this paper. A “2 + 3 + 2” stepped structure is designed to convert the seven beam spots into a circular arrangement. An aspherical lens with a large numerical aperture (NA) of 0.85 and a focal length of 1.873 mm is used in each single QCL for collimation, and seven reflectors are utilized in the 7-channel QCLs combined in the spatial beam. After combining the spatial beam, the maximum continuous output power of the system is 3.6 W, and the beam quality M2 is 5.59 in the fast axis and 8.3 in the slow axis, respectively.
1 February 2013 in Journal of Nanoscience and Nanotechnology
In this paper, we demonstrate the optical and electrical performance of ZnO nanorod arrays after surface passivation. The material of larger band gaps (HfO2) was chosen for the surface passivation layer through atom layer deposition (ALD), in order to confine the carriers within the core material efficiently. In the case of nanorods with high defects, HfO2 coating treatment not only improved near band edge (NBE) but also greatly enhanced the defect luminescence, while in the case of nanorods with low defects, surface coating suppressed defect luminescence and promoted the NBE emission as well as electrical performance therein. PL investigation at 10 K displayed that after surface coating phonon related emission was confined along c-axis and the exciton emission related to surface states was largely restrained. Therefore, it's suggested that surface passivation of ZnO nanorod arrays decreases the surface defect, enhances the side confinement of nanorod, and thus improves the optical and electrical performance efficiently.