In this study, a low-resistance, low-loss, continuously gradual composition extreme double asymmetric (CGC-EDAS) epitaxial structure is designed to improve efficiency. The structure and facet reflectivity of the broad area (BA) lasers are optimized to maximize the power conversion efficiency (PCE). In the experiment, the peak PCE of 75.36% is measured at 25°C. At 0°C, a peak PCE of 81.10% is measured and the PCE can still reach 77.84% at an output power of 17.10 W, which, to the best of our knowledge, is the highest value to date for any BA lasers.
Electrically injected supersymmetric (SUSY) semiconductor lasers are proposed and fabricated. Two successive SUSY transformations are applied to the main array arranged along the direction of epitaxial growth, which can remove the propagation constants of the fundamental mode and the leaky mode of the main array from the superpartner while keeping those of other high-order modes. The SUSY laser possesses an excellent mode discrimination and favors the lasing of the fundamental mode. The fabricated SUSY laser can emit light with a single-lobe vertical far-field pattern with the full width at half maximum of 16.87° under an injection current of 1.4 A.
12 February 2018 in IEEE Photonics Technology Letters
High-power low-divergence tapered lasers with slots in the ridge waveguide section and near the front facet are demonstrated and compared. Both devices can achieve a narrow spectral width. Tapered lasers with slots in the ridge waveguide deliver an output power of 2.15 W with a wall-plug efficiency of 43%. The maximum side mode suppression ratio (SMSR) is 28.8 dB and the vertical far-field angle is around 11°. For tapered lasers with slots near the front facet, the output power and the wall-plug efficiency are 1.87 W and 37%, respectively. A SMSR of 36.8 dB and a vertical beam divergence of 7° are obtained. High beam quality is achieved for both devices.
High-performance 808-nm five-junction vertical cavity surface emitting lasers (VCSELs) are designed and fabricated. The light-current-voltage characteristics of the 808-nm five-junction and single-junction VCSELs are compared. The 808-nm five-junction VCSELs with a high slope efficiency of 5.92 W/A at $5~^{\circ }$ C and 5.10 W/A at $25~^{\circ }$ C are achieved. The maximum power conversion efficiency is 55.04% for the 808-nm five-junction individual VCSEL. Under short pulse conditions (400 Hz, 60 ns pulse width), the peak output power of the five-junction VCSELs array is 1.013 kW at 224 A. Such multi-junction 808 nm VCSELs with a high power density have important applications in Q-tuned solid-state lasers.
Based on the demand for high-power output, a spatial beam combining 7-channel quantum cascade lasers (QCLs) is demonstrated in this paper. A “2 + 3 + 2” stepped structure is designed to convert the seven beam spots into a circular arrangement. An aspherical lens with a large numerical aperture (NA) of 0.85 and a focal length of 1.873 mm is used in each single QCL for collimation, and seven reflectors are utilized in the 7-channel QCLs combined in the spatial beam. After combining the spatial beam, the maximum continuous output power of the system is 3.6 W, and the beam quality M2 is 5.59 in the fast axis and 8.3 in the slow axis, respectively.