Existing bra sizing systems are based only on bust and underbust girths, which do not guarantee an accurate fit or comfort for consumers. This study presents a comprehensive investigation of the impact of age and body mass index (BMI) on bra sizing systems, and the distributions of band and cup sizes based on anthropometric measurement data. The first four principal components were extracted by principal component analysis, and the factor loadings of age and BMI were found to be significant determinants of bra size along with 12 other variables. Furthermore, chi-square analysis revealed that bra size allocations were significantly influenced by age and BMI. Thus, we propose that age and BMI should be considered as auxiliary criteria for the bra sizing system. Taken together, these findings will be of value to designers and bra manufacturers in developing well-fitting bras for their target consumers, and to consumers for selecting well-fitting bras with confidence. Practitioner Summary: This study contributes to an understanding of how bra sizing systems are affected by age and BMI. This understanding is valuable to bra designers, manufacturers, and retailers, as it will enable the adjustment of bra sizes for different target markets and in turn improve consumer confidence in selecting proper fitting and comfortable bras.
Traditional apparel assembly technology—cut and sewn process—requires labor-intensive pre- and post-production. While conventional weaving technology has made efforts to streamline the garment-making process, additional assembly processes are still required—sewing or joining after removing the woven samples from the loom. This challenge in the garment-making process discloses the need for a novel type of advanced textile technology and manufacturing techniques incorporating shaping and assembly capabilities. Exploiting three-dimensional (3D)-to-two-dimensional (2D)-to-3D methodology integrated 3D weaving technology, the 3D woven bra prototype is practically demonstrated in a significantly effective manufacturing process, shaped in one weaving cycle without additional assembly needs. The bra manufacturing process is also assessed by traditional industry loom, and the same efficient manufacturing process is also achieved. This indicates that 3D weaving technology contributes as an innovative manufacturing technology in the apparel industry to facilitate the manufacturing process significantly and eliminates further joining and sewing processes.
Current sports bras are typically manufactured via a cut and sew process resulting in a high volume of post-production material waste. Seams derived from this cut and sew process are known to irritate the skin during exercise. This irritant discomfort seriously affects the dynamic comfort during exercise, hindering limb movement and displacement of the female breast. It implies a need for an alternative textile manufacturing process for a seamless sportswear-sports bra to combine the surface aesthetics with biomimetics together with anthropometry and ergonomic data. Tailoring the two yarn interlocking directions (0/90°) within the compound structure of a multilayer multilevel weave architecture provides a construction process to the production, the weaving, of seamless 3D woven spherical forms. Seamlessly shaped wovens in this paper are underpinned by biomimetic anthropometry and real-time data to produce variable spherical forms that mould and support a given set of 3D geometries. Upon completion of the weave generation using specialised weave software, the production parameters are completed upon transfer to the combined weaving technology, Mageba-Staubli Unival 100 (MS-100). The 2D on-loom woven fabric converts to a 3D shape upon removal and by pulling-pushing-unfolding the woven fabric (2D-to-3D). The scope of end applications within the sportswear-sports bra sector (but not limited to) enables a framework for the generic design geometries and production principles.
Non-invasive continuous health monitoring has become feasible with the advancement of biosensors. While monitoring certain biomarkers such as heart rate or skin temperature are now at a certain maturity, monitoring molecular biomarkers is still challenging. Progress has been shown in sampling, measurement, and interpretation of data toward non-invasive molecular sensors that can be integrated into daily wearable items. Toward this goal, this paper explores the potential of embroidered interdigitated transducer (IDT)-based sensors for non-invasive, continuous monitoring of human biomarkers, particularly glucose levels, in human sweat. The study employs innovative embroidery techniques to create flexible fabric-based sensors with gold-coated IDTs. In controlled experiments, we have shown the variation of glucose concentration in water can be wirelessly detected by tracking the resonant frequency of the embroidered sensors. The current sensors operate at 1.8 GHz to 2 GHz and respond to the change in glucose concentration with a sensitivity of MHz/(mg/dL). The embroidered IDT-based sensors with wireless sensing will be a new measurement modality for molecular wearable sensors. The establishment of a wireless sensing mechanism for embroidered IDT-based sensors will be followed by an investigation of sweat for molecular detection. This will require adding functionalities for sampling and interpretation of acquired data. We envisage the embroidered IDT-based sensors offer a unique approach for seamless integration into clothing, paving the way for personalised, continuous health data capture.
The critical need for accurate and non-invasive temperature monitoring is prevalent in extreme environments, such as scuba diving. Current temperature measurement technologies present limitations, prompting the development of innovative solutions. We propose the integration of embroidered wearable thermocouple sensors, demonstrating their versatility and reliability in real-time temperature monitoring. T-type thermocouples, embroidered onto fabric, offer flexibility in sensor placement, eliminating the need for skin attachment. The results indicate efficient temperature detection across different body areas, from 32.5 °C at extremities to 37.5 °C at the axial position. Testing in scuba diving conditions reveals potential applications, including overheating alerts and hypothermia prevention. This technology bridges the gap between temperature measurement and the challenges of underwater exploration, enhancing diver safety and data collection capabilities.
Non-invasive continuous health monitoring has become feasible with the advancement of biosensors. While monitoring certain biomarkers such as heart rate or skin temperature are now at certain maturity, monitoring molecular biomarkers is still challenging. Progress has been shown in sampling, measurement and interpretation of data towards non-invasive molecular sensors that can be integrated in daily wearable items. Towards this goal, this paper explores the potential of embroidered interdigitated transducer (IDT)-based sensors for non-invasive, continuous monitoring of human biomarkers, particularly glucose levels, in human sweat. The study employs innovative embroidery techniques to create flexible fabric-based sensors with gold-coated IDTs. In controlled experiments, we have shown the variation of glucose concentration in water can be wirelessly detected by tracking the resonant frequency of the embroidered sensors. The current sensors operate at 1.8GHz–2GHz and respond to the change of glucose concentration with a sensitivity of 0.17 MHz/(mg/dl). The embroidered IDT-based sensors with wireless sensing will be a new measurement modality for molecular wearable sensors. The establishment of a wireless sensing mechanism for embroidered IDT-based sensors will be followed by investigation of sweat for molecular detection. This will require adding functionalities for sampling and interpretation of acquired data. We envisage the embroidered IDT-based sensors offer a unique approach for seamless integration into clothing, paving the way for personalised, continuous health data capture.