The evolution of water and land resource carrying capacity significantly impacts optimal water and land resource allocation and regional sustainable development in arid regions. This study proposes a model that combines cellular automaton (CA) and Markov; this model aids in predicting spatial changes in water and land resource availability. In this study, taking the Jingdian Irrigation District in China’s northwest arid region as an example, we used long-series monitoring data and a Landsat dataset to create a raster-weighted fusion of 18 indicators and quantitatively analyzed the carrying status of water and land resources from 1994 to 2018. The CA–Markov model was used to simulate the carrying status of water and land resources in 2018 and to perform accuracy correction. The validated CA–Markov model was used to predict water and land resource carrying status in 2026 and 2034. The results show (1) from 1994 to 2018, the area of “good carrying” zone increased by 10.42%, the area of “safe carrying” zone increased by 7%, and spatially rose in an arc from the town to the surrounding regions. The area of “critical carrying” zone remains almost unchanged. The area of “slight carrying” zone decreased by 5.18% and the area of “severe carrying” zone decreased by 11.99%. (2) Comparing the actual and predicted carrying state of water and land resources in 2018, it was found that the simulation accuracy of “good carrying”, “safe carrying”, “critical carrying”, “slight carrying”, and “severe carrying” reached 98.71%, 92.07%, 95.34%, 94.05%, and 93.73%, respectively. This indicates that the simulation results have high reliability and applicability. (3) The future medium and long-term carrying status of water and land resources are healthy, but this trend is gradually slowing. The “slight carrying” and “severe carrying” zones show the gradual spatial transition from land desertification to soil salinization.
The vortices, backflow, and siltation caused by sediment-laden flow are detrimental to the safe and efficient operation of pumping stations. To explore the effects of water–sediment two-phase flow on the velocity field, vorticity field, and sediment distribution within intake structures, field tests and numerical simulations were conducted in this study with consideration for the sediment concentration, flow rate, and start-up combination. We applied a non-contact laser scanner and ultrasonic Doppler velocimetry to obtain the field data and reverse modeling of the three-dimensional model of the intake structure under siltation. A multiphase flow model based on the Euler–Euler approach combined with the k-ε turbulence model was adopted for numerical simulation under 10 working conditions, and the reliability was verified with field data. The results indicate that sediment promotes the evolution of coaxial vortices into larger-scale spiral vortices along the water depth, and the process of sediment deposition is controlled by the range, intensity, and flow velocity of the backflow zone. Furthermore, the maximum volume fraction of the near-bottom sediment increased by 202.01% compared to the initial state. The increase in flow rate exacerbates the turbulence of the flow field. Although the increase in sediment concentration benefits the flow diffusion, it further promotes sediment deposition. This study provides a new idea for modeling complex surfaces and considers different operating conditions. It can serve as a scientific reference for the structural optimization and anti-siltation design of similar water-conservancy projects.
For many pumping stations that draw water from sediment-laden rivers, the flow patterns in their intake structure are disordered due to sediment deposition, which seriously threatens the safe operation of projects. In order to accurately construct the complex and refined three-dimensional (3D) geometric model of the intake structure, and further explore the hydraulic characteristics of the water-sediment two-phase flow inside, this paper proposes a reverse modeling method and carries out numerical simulation. A typical forward intake structure in the arid region of Northwest China is selected as the research object. According to the point cloud data of the intake structure obtained by the 3D laser scanner, the curved surface models are rebuilt and imported into ICEM-CFD for improvement, thereby obtaining the 3D computational domain model of the actual intake structure; after lossless docking with FLUENT, the hydraulic characteristics are analyzed by applying the Realizable k-ε turbulence model coupled with the Mixture multiphase flow model considering interphase slip; finally, the reliability of the simulation is verified by in-situ flow measurements. Results demonstrate that the method can precisely reflect the actual geometric boundary and siltation of intake structure, and the numerical model can accurately identify the two-phase flow; the siltation improves the local flow field structure of the forebay to some extent, but cause the loss of the overall hydraulic performance of the intake structure. This study can provide a scientific reference for the geometric model construction and hydraulic analysis of intake structures with complex boundary and sediment deposition.
1 September 2019 in IOP Conference Series: Earth and Environmental Science
This paper focuses on the high frequency vibration of the pipeline structure during operation of the large cascade pumping station. In order to explore its causes and inherent vibration characteristics, this paper takes #1 pressure pipeline of No.7 pump of Gansu Province Jingdian Project as the research object. The principle of additional mass method is used to establish a simplified fluid-solid coupling simulation model, and then the model is used to carry out numerical simulation test on the pipeline under different unit opening and closing conditions. After analyzing the numerical results of the simulation, the vibration mode and displacement deformation law are discovered and compared with the DASP field monitoring results. The results show that: under four representative working conditions, the vibration deformation of the pressure pipeline mainly occurs in the elbow section and the connecting section of the large and small tubes; the amplitude of the vibration mode increases with the increase of the modal order; furthermore, the water outlet pipe that is not easily vibrated in the high-order mode is gradually vibrated and deformed; in addition, the numerical simulation results are in good agreement with the field test results. This research can provide reference for the optimization design of pipeline vibration isolation and vibration reduction, and also provide a theoretical basis for the subsequent research on pipeline structural damage diagnosis and its safe operation.