Cundong Xu

Prof. Cundong Xu


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 May 2026 in Journal of Mountain Science
Verified
Journal Article
Open access
DLDan Liu
Dan Liu
Jijian LianJijian Lian
Jijian Lian
FLFang Liu
Fang Liu
BMBin Ma
Bin Ma
DLDongming Liu
Dongming Liu
JZJinxin Zhang
Jinxin Zhang
Accurately predicting ski-jump flood discharge atomization is crucial for designing effective disaster-mitigation measures, particularly because low ambient pressure increases the risk of atomized protection in high-altitude regions. However, owing to the complex effects of low ambient pressure on strongly coupled atomized field sources, it is difficult to fully describe the comprehensive behaviour of such sources theoretically, which limits the further development of random splashing numerical models. In this paper, a refined random splashing numerical model characterized by low ambient pressure is developed based on experimental results and applied to high-altitude earth–rockfill dam projects. Compared with the reference ambient pressure condition ( P 0 = 101.457 kPa), which corresponds to the same flood discharge flow, a decrease in ambient pressure by 0.1P 0 leads to a maximum change rate not exceeding 10 m for the characteristic boundary of the 10 mm/h atomized rain intensity line at the QX Hydropower Station. This observation also applies to both the 40 mm/h and 10 mm/h atomized rain intensity lines at the RM Hydropower Station. For the two groups of flip bucket types designed for the RM Hydropower station, the loads associated with atomized protection are predominantly concentrated on the left bank. The maximum height of the 10 mm/h atomized rain intensity line affected by atomized rain ranges from 0.83 to 0.85 times the maximum dam height of 315 m. The distance between the farthest downstream boundary and the Spillway No. 3 outlet is between 666.80 and 692.40 metres. Since the flip bucket shape variations only slightly affect the atomization zone extent, further optimization is needed. The study can provide valuable methodological and decision-making support for safeguarding against existing and potential impacts within areas affected by flood discharge atomization from high-altitude hydropower stations.

29 June 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
CXCundong Xu
Cundong Xu
ZRZihao Ren
Zihao Ren
SHSong Huang
Song Huang
JLJiaming Li
Jiaming Li
YZYahui Zi
Yahui Zi
XHXiaomeng Hu
Xiaomeng Hu
Inadequate hydrodynamics can cause deterioration of the water environment within rivers. Regulating water conservancy projects can effectively improve the state of the water environment of rivers and promote sustainable regional development. The river plain in Zhejiang Province, China, suffers from severe hydrodynamic deficiencies, which have a significant impact on the state of the regional water environment. To investigate the changing state of the water environment of the river plain under water conservancy project control, in this study we constructed a two-dimensional hydrodynamic–water quality model based on the AD and ECOLAB modules in MIKE 21 software 2014 Edition. Combined with conservative tracers, the changes in the water displacement rate, flow rate, and water environment quality of the river plain were simulated under different regulation schemes over 7 days. A quantitative analysis of the effects of improving the state of the water environment in the river plain was carried out using a cluster analysis and a cloud model. (1) The water replacement rate of the outer river reached 90% after 3 days and approached 100% after 7 days. The water replacement rates of the inner pond were 51.2, 49.6, and 55.8%. This indicated that the engineering control measures effectively improved the replacement capacity of the river. (2) The contents of DO and BOD5 in the river have increased from class V to above class 3. The overall water quality is in the range of classes 2 to 3, and in some parts it can reach class 1. This indicates that the regulatory plan played a certain role in improving the river water environment. (3) The water pollution in the study area showed a fluctuating and decreasing trend over 7 days. There was a positive correlation between the flow velocity, water replacement rate, DO, and BOD5.

9 January 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
CXCundong Xu
Cundong Xu
XHXiaomeng Hu
Xiaomeng Hu
ZLZijin LIU
Zijin LIU
XWXin Wang
Xin Wang
JTJunjiao Tian
Junjiao Tian
ZZZhihong Zhao
Zhihong Zhao
The evolution of water and land resource carrying capacity significantly impacts optimal water and land resource allocation and regional sustainable development in arid regions. This study proposes a model that combines cellular automaton (CA) and Markov; this model aids in predicting spatial changes in water and land resource availability. In this study, taking the Jingdian Irrigation District in China’s northwest arid region as an example, we used long-series monitoring data and a Landsat dataset to create a raster-weighted fusion of 18 indicators and quantitatively analyzed the carrying status of water and land resources from 1994 to 2018. The CA–Markov model was used to simulate the carrying status of water and land resources in 2018 and to perform accuracy correction. The validated CA–Markov model was used to predict water and land resource carrying status in 2026 and 2034. The results show (1) from 1994 to 2018, the area of “good carrying” zone increased by 10.42%, the area of “safe carrying” zone increased by 7%, and spatially rose in an arc from the town to the surrounding regions. The area of “critical carrying” zone remains almost unchanged. The area of “slight carrying” zone decreased by 5.18% and the area of “severe carrying” zone decreased by 11.99%. (2) Comparing the actual and predicted carrying state of water and land resources in 2018, it was found that the simulation accuracy of “good carrying”, “safe carrying”, “critical carrying”, “slight carrying”, and “severe carrying” reached 98.71%, 92.07%, 95.34%, 94.05%, and 93.73%, respectively. This indicates that the simulation results have high reliability and applicability. (3) The future medium and long-term carrying status of water and land resources are healthy, but this trend is gradually slowing. The “slight carrying” and “severe carrying” zones show the gradual spatial transition from land desertification to soil salinization.

4 September 2025 in Buildings
Verified
Journal Article
Open access
PDF file
LDLianying Ding
Lianying Ding
ZLZhenan Lin
Zhenan Lin
CXCundong Xu
Cundong Xu
XXXuHui Xu
XuHui Xu
博李博飞 李
博飞 李
JSJiaxing Shen
Jiaxing Shen
Hybrid fiber-reinforced concrete (HFRC), renowned for its significantly enhanced mechanical properties and structural integrity, is widely used in infrastructure construction and has become a key avenue of modern high-performance concrete development. The hybrid application of basalt fiber (BF) and polypropylene fiber (PPF) at optimized ratios generates synergistic effects, improving both mechanical performance and material service reliability. To explore and evaluate the synergistic mechanism of BF-PPF hybrid fibers on concrete’s mechanical properties and performance, this study employs an orthogonal experimental design and mechanical testing methods, measuring the materials’ static compressive strength (loading rate: 0.6 mm/min), splitting tensile strength (loading rate: 0.12–0.14 MPa/s), dynamic elastic modulus (measured by the ultrasonic method), and dynamic compressive strength (loading rates: 0.6 mm/min, 6 mm/min, and 60 mm/min). For these tests, we prepared 100 mm × 100 mm × 100 mm cubic specimens (for static compressive, dynamic compressive, and splitting tensile tests) and 400 mm × 100 mm × 100 mm prismatic specimens (for dynamic elastic modulus tests), with three parallel specimens in each test group. In addition, the microstructure was characterized by scanning electron microscopy (SEM) to observe the fiber-matrix interaction. The results show that when the BF/PPF volume ratio is 1:2 (BF0.05PPF0.1), the concrete’s compressive strength, splitting tensile strength, and elastic modulus increase by 13.7%, 76.3%, and 116.0%, respectively, with corresponding synergistic effect indices (Q) of 0.057, 0.213, and 0.241, indicating obvious positive synergy. Under dynamic loading, hybrid combinations with higher PPF content (e.g., BF0.05PPF0.1) exhibit strain-rate-dependent enhancements in compressive strength and better impact resistance. SEM analysis reveals that fibers inhibit microcrack propagation through fiber bridging, network distribution, and pull-out resistance, while also improving the interfacial transition zone’s structure. These findings provide theoretical support for the engineering application of composite fiber-reinforced concrete materials.

5 March 2024 in Water
Verified
Journal Article
Open access
PDF file
CXCundong Xu
Cundong Xu
JTJunjiao Tian
Junjiao Tian
GWGuoxia Wang
Guoxia Wang
HLHaidong Lian
Haidong Lian
RWRongrong Wang
Rongrong Wang
XHXiaomeng Hu
Xiaomeng Hu
The vortices, backflow, and siltation caused by sediment-laden flow are detrimental to the safe and efficient operation of pumping stations. To explore the effects of water–sediment two-phase flow on the velocity field, vorticity field, and sediment distribution within intake structures, field tests and numerical simulations were conducted in this study with consideration for the sediment concentration, flow rate, and start-up combination. We applied a non-contact laser scanner and ultrasonic Doppler velocimetry to obtain the field data and reverse modeling of the three-dimensional model of the intake structure under siltation. A multiphase flow model based on the Euler–Euler approach combined with the k-ε turbulence model was adopted for numerical simulation under 10 working conditions, and the reliability was verified with field data. The results indicate that sediment promotes the evolution of coaxial vortices into larger-scale spiral vortices along the water depth, and the process of sediment deposition is controlled by the range, intensity, and flow velocity of the backflow zone. Furthermore, the maximum volume fraction of the near-bottom sediment increased by 202.01% compared to the initial state. The increase in flow rate exacerbates the turbulence of the flow field. Although the increase in sediment concentration benefits the flow diffusion, it further promotes sediment deposition. This study provides a new idea for modeling complex surfaces and considers different operating conditions. It can serve as a scientific reference for the structural optimization and anti-siltation design of similar water-conservancy projects.

26 February 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
YSYanwei Sun
Yanwei Sun
QLQingyun Li
Qingyun Li
FYFurong Yu
Furong Yu
Mingwei MaMingwei Ma
Mingwei Ma
CXCundong Xu
Cundong Xu
BRCs (bioretention cells), one of many low-impact development (LID) practices, are increasingly utilized to lessen the amount of runoff while simultaneously improving the runoff quality. Because the goal of BRCs and LID designs, in general, is to mimic or replicate the pre-development hydrology, it is critical to evaluate the hydrologic and ecologic performances of the BRC facility from the perspective of replicating the pre-development hydrology. The metrics developed in this study were intended to represent the hydrologic regime including the runoff volume control metrics, peak flow frequency exceedance curve, and flow duration curve. We also used a hydrological indicator of T0.5, the fraction of a multi-year period in which the flow exceeds the 0.5-year return period storm to represent the performances regarding downstream ecology. The indicators were compared to their pre-development values to determine how closely they reflected and replicated the pre-development state. A long-term stormwater management model (SWMM) model was developed to examine conditions before and after development and water movement in BRCs. When the BRCs facilities areas are 5% of the entire impervious study area, key findings show that: (1) BRCs have significant runoff volume control performances. (2) The peak flow frequency exceedance curve with BRCs could fully match the pre-development scenario for minor rainfall events compared to the 0.1-year storm. Flow duration curves with BRCs showed that, the frequency, magnitude, and duration of small flows that occurred for more than 90% of the total time closely matched those of pre-development hydrology. (3) T0.5 with BRCs showed significant improvement compared with the value of the area with no BRCs and was close to the pre-development T0.5. The findings presented in this study indicated the significant performance of BRCs in improving downstream ecology.