Integrating renewable energy into power grids is seen in increase in recent years since these energy sources are sustainable and clean. However, the integration brings about considerable technical challenges associated with fluctuations and uncertainties of the energy availability whilst maintaining the stability of smart grids. The prediction of renewable energy generation is key to achieve optimal power dispatch in renewable-intensive smart grids. However, uncertain interruption and prediction errors will make an optimal decision more challenging. Model predictive control (MPC) is an effective way to overcome the discrepancies between the prediction and the real-world system through a closed-loop correction over iteration process. This study develops an improved MPC scheme used with a hybrid energy storage system for optimal power dispatch in a smart grid. This hybrid renewable energy system consists of a wind farm, a hydrogen/oxygen storage system and several fuel cells (FCs). In this study, particle swarm optimization (PSO) with a back propagation (BP) artificial neural network is developed to predict the wind energy availability by using measured data. Then, a genetic algorithm (GA) is combined with a state space model (SSM) to achieve the MPC control. A dataset of 24-hour ahead predictive generation is calibrated from the measured data and is defined for optimal power flow between the grid, the wind farm and the storage subsystem so as to balance the supply and load. The optimization target is to achieve a minimal energy exchange between the power grid and the hybrid renewable energy storage system. Based on actual measured data, the test results have shown that the proposed methodology can maximize the local usage of wind power whilst minimizing the power exchange with the grid. An optimal power dispatch strategy is proved to be effective to meet the demand and efficiency with dynamic control of the FCs. The usage of the intermittent wind power is increased from 45% to 90% in the four test studies. Therefore, this work can minimize the impact of fluctuating renewable energy on the power grid and enhance uptakes of FC-based energy systems. This is particularly economic and relevant to the remote and under-developed regions where their power networks are weak and vulnerable.

Wind energy conversion systems have become a key technology to harvest wind energy worldwide. In permanent magnet synchronous generator-based wind turbine systems, the rotor position is needed for variable speed control and it uses an encoder or a speed sensor. However, these sensors lead to some obstacles, such as additional weight and cost, increased noise, complexity and reliability issues. For these reasons, the development of new sensorless control methods has become critically important for wind turbine generators. This paper aims to develop a new sensorless and adaptive control method for a surface-mounted permanent magnet synchronous generator. The proposed method includes a new model reference adaptive system, which is used to estimate the rotor position and speed as an observer. Adaptive control is implemented in the pulse-width modulated current source converter. In the conventional model reference adaptive system, the proportional-integral controller is used in the adaptation mechanism. Moreover, the proportional-integral controller is generally tuned by the trial and error method, which is tedious and inaccurate. In contrast, the proposed method is based on model predictive control which eliminates the use of speed and position sensors and also improves the performance of model reference adaptive control systems. In this paper, the proposed predictive controller is modelled in MATLAB/SIMULINK and validated experimentally on a 6-kW wind turbine generator. Test results prove the effectiveness of the control strategy in terms of energy efficiency and dynamical adaptation to the wind turbine operational conditions. The experimental results also show that the control method has good dynamic response to parameter variations and external disturbances. Therefore, the developed technique will help increase the uptake of permanent magnet synchronous generators and model predictive control methods in the wind power industry.

Utilization of renewable energy (e.g., wind, solar, bio-energy) is high on international and governmental agendas. In order to address energy poverty and increase energy efficiency for rural villages, a hybrid distribution generation (DG) system including wind, hydrogen and fuel cells is proposed to supplement to the main grid. Wind energy is first converted into electrical energy while part of the generated electricity is used for water electrolysis to generate hydrogen for energy storage. Hydrogen is used by fuel cells to convert back to electricity when electrical energy demand peaks. An analytical model has been developed to coordinate the operation of the system involving energy conversion between mechanical, electrical and chemical forms. The proposed system is primarily designed to meet the electrical demand of a rural village in the UK where the energy storage system can balance out the discrepancy between intermittent renewable energy supplies and fluctuating energy demands so as to improve the system efficiency. Genetic Algorithm (GA) is used as an optimization strategy to determine the operational scheme for the multi-vector energy system. In the work, four case studies are carried out based on real-world measurement data. The novelty of this study lies in the GA-based optimization and operational methods for maximized wind energy utilization. This provides an alternative to battery energy storage and can be widely applied to wind-rich rural areas.

This paper proposes a dynamic programming (DP)-based operational strategy for a biofuel distributed generation system with hybrid energy storage (BDG-HES). The proposed system consists of a biofuel-powered engine and a gen-set, six battery packs, a super-capacitor module, and four power electron-ic converters. It is primarily designed to meet the electrical demand of a typical UK family while the energy storage system can reduce the operating duration of the engine so as to improve the system efficiency. DP as an optimization strategy is used to determine the operational scheme for the BDG-HES. In the work, four case studies are carried out based on real-world measurement data. The test results have confirmed the ef-fectiveness of the proposed methodology and the overall system efficiency is improved by approximately 19% over the operational range compared to a conventional gen-set based power system.

This paper addresses the challenge of renewable energy curtailment, which stems from the inherent uncertainty and volatility of wind and photovoltaic (PV) generation, by developing a robust model predictive control (RMPC)-based scheduling strategy for an integrated wind–PV–hydrogen storage multi-energy flow system. By building a “wind–PV–hydrogen storage–fuel cell” collaborative system, the time and space complementarity of wind and PV is used to stabilize fluctuations, and the electrolyzer–hydrogen production–gas storage tank–fuel cell chain is used to absorb surplus power. A multi-time scale state-space model (SSM) including power balance equation, equipment constraints, and opportunity constraints is established. The RMPC scheduling framework is designed, taking the wind–PV joint probability scene generated by Copula and improved K-means and SSM state variables as inputs, and the improved genetic algorithm is used to solve the min–max robust optimization problem to achieve closed-loop control. Validation using real-world data from Xinjiang demonstrates a 57.83% reduction in grid power fluctuations under extreme conditions and a 58.41% decrease in renewable curtailment rates, markedly enhancing the local system’s capacity to utilize wind and solar energy.

In recent years, global energy shortages and environmental pollution have intensified. With the large-scale development of new energy wind energy, there is also a major problem-insufficient absorption capacity. In order to promote large-scale wind power consumption, a model predictive control method based on wind hydrogen coupled power generation system is proposed. Firstly, the mathematical models of equivalent state of charge in wind power, hydrogen energy storage systems (HESS), and gas storage tanks are analyzed. Secondly, the optimization objective function is to maximize the local wind energy consumption and minimize the energy interaction between the main grid. Establish an SSM prediction model based on the MPC strategy. Genetic optimization algorithm is used for rolling solution. Aiming at the interference and prediction error generated during the operation of the system, a feedback mechanism is introduced to embed it into the MPC framework. Then, the rolling time domain method is used to compensate for system interference. Finally, a case study was conducted based on actual measurement data from a certain area in the Netherlands. By comparing the wind power dissipation effects of the system during operation, it is verified that the proposed method can effectively reduce interactive power consumption. Maximize the local consumption of wind power.