Shuai Cao

Prof. Dr. Shuai Cao

University of Science and Technology Beijing, Beijing, China

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2018 in Construction and Building Materials
Verified
Journal Article
Closed access
Shuai CaoShuai Cao
Shuai Cao
WSWeidong Song
Weidong Song
Erol YilmazErol Yilmaz
Erol Yilmaz

19 October 2020 in Minerals
Verified
Journal Article
Open access
PDF file
李李李佳建 李佳建
李佳建 李佳建
Erol YilmazErol Yilmaz
Erol Yilmaz
Shuai CaoShuai Cao
Shuai Cao
Understanding the flow process of cemented tailings backfill (CTB) is important for successful pumping into underground stopes. This study examines the effects of solid content (SC), cement/tailings (c/t) ratio, and curing time (CT) on rheological and mechanical properties of CTB mixes. The slurry concentration of the mixes was 65, 67, and 69 wt. %, with c/t ratios ranging from 1:4 to 1:20. Unconfined compressive strength (UCS) tests were performed on hardened CTB mixes after curing 3, 7, and 28 days. The rheological properties of CTB slurries are mainly related to SC. The yield stress and viscosity of fresh mixes increase with increasing SC, but the pipeline resistance loss (PRL) also increases with increasing SC. According to the analysis of variance, the SC and flow rate are the most significant parameters which greatly affect the PRL performance. The c/t and CT parameters are the most significant parameters for affecting the shrinkage rate. The findings offer a reference for theoretical optimization for mine filling systems of similar type.

15 January 2022 in International Journal of Minerals, Metallurgy and Materials
Verified
Journal Article
Closed access
PDF file
JLJiajian Li
Jiajian Li
Shuai CaoShuai Cao
Shuai Cao
Erol YilmazErol Yilmaz
Erol Yilmaz
YLYunpeng Liu
Yunpeng Liu

14 August 2018 in Minerals
Verified
Journal Article
Open access
PDF file
Shuai CaoShuai Cao
Shuai Cao
Erol YilmazErol Yilmaz
Erol Yilmaz
WSWeidong Song
Weidong Song
In this study, the particle size distribution and chemical composition of gold mine tailings were examined experimentally. A series of viscosity and uniaxial compressive strength (UCS) tests were used to study the relations between the viscosity of cemented tailings backfill (CTB) slurry, the solid content (SD), and the cement-to-tailings ratio (c/t). Relations between UCS performance of CTB and SD, c/t, and curing time (CT) were discussed while examining the microstructure of 28-day cured backfill with different solid contents. Results illustrate that a major increase in CTB viscosity by increasing the SD leads to the formation of tailings grains for a skeleton formation, which is formed due to consolidation and gravitational forces. The CTB’s strength increases with the increase of c/t, SD, and CT, due to a decrease in water-to-cement ratio and porosity, and an increase in hydration products over time. The SEM micrographs show how CTB’s microstructure is affected by the SD, generating ettringites and calcium silicate hydrates in the backfill matrix. The findings of this study will lead to an efficient CTB mix design for reaching the higher performance in underground mining structures, thereby reducing expenses related to the backfill.

1 October 2018 in Construction and Building Materials
Verified
Journal Article
Closed access
Shuai CaoShuai Cao
Shuai Cao
Erol YilmazErol Yilmaz
Erol Yilmaz
WSWeidong Song
Weidong Song

3 September 2018 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Gaili XueGaili Xue
Gaili Xue
Erol YilmazErol Yilmaz
Erol Yilmaz
WSWeidong Song
Weidong Song
Shuai CaoShuai Cao
Shuai Cao
With the use of glauberite mineral (GM) and sodium hydroxide (SH) alkaline catalysts to stimulate slag powder’s internal cementation activity and incorporate the two fine-grained solid wastes, such as quicklime (Q) and desulfurized ash (DA), a new cementitious material suitable for mine tailings was developed to replace traditional ordinary Portland cement (OPC) for reducing cement-related costs. A series of uniaxial compressive strength (UCS) tests were carried out on cemented tailings backfill (CTB) samples containing different activators. The results showed that (1) the highest UCS values of 14-day and 28-day cured CTB samples were 1.259 MPa and 2.429 MPa, respectively, and the effect of different activator types was in the order of SH > GM > DA > Q and SH > GM > Q > DA; (2) the relationship between UCS and activator dosages followed the function y = ax3 − bx2 + cx − d. Compared with the OPC 32.5 R cemented samples, the minimum strength growth factor was 1.45, and the maximum reached 2.03; (3) the optimal proportion of DA slag formula was 4.5% or 5.0% Q, 19% DA, 2.5% GM, and 0.7% SH. The aforesaid new cementitious materials met the mine’s UCS requirements with a relatively low cost (17.04–17.20 €/ton) and solved the stacking problem of solid wastes on the surface well. Ultimately, this study provides a useful reference for the development of mineral binders.