In this contribution, we present an experimental and numerical study on the coating of Al plasmonic nanostructures through a conformal layer of high-refractive-index molybdenum oxide. The investigated structures are closely coupled nanodisks where we observe that the effect of the thin coating is to help gap narrowing down to the sub-5-nm range, where a large electromagnetic field enhancement and confinement can be achieved. The solution represents an alternative to more complex and challenging lithographic approaches, and results are also advantageous for enhancing the long-term stability of aluminum nanostructures.
MoS2 is a two-dimensional layered transition metal dichalcogenide with unique electronic and optical properties. The fabrication of ultrathin MoS2 is vitally important, since interlayer interactions in its ultrathin varieties will become thickness-dependent, providing thickness-governed tunability and diverse applications of those properties. Unlike with a number of studies that have reported detailed information on direct bandgap emission from MoS2 monolayers, reliable experimental evidence for thickness-induced evolution or transformation of the indirect bandgap remains scarce. Here, the sulfurization of MoO3 thin films with nominal thicknesses of 30 nm, 5 nm and 3 nm was performed. All sulfurized samples were examined at room temperature with spectroscopic ellipsometry and photoluminescence spectroscopy to obtain information about their dielectric function and edge emission spectra. This investigation unveiled an indirect-to-indirect crossover between the transitions, associated with two different Λ and K valleys of the MoS2 conduction band, by thinning its thickness down to a few layers.
Hydrogen is an energy vector capable of storing and supplying large amounts of energy, maximising the benefits of renewable and sustainable energy sources. Hydrogen is usually stored as compressed hydrogen gas, or liquid hydrogen. However, the former requires high pressure, the latter cryogenic temperatures, being a huge limit to the widespread adoption of these storage methods. Thus, new materials for solid-state hydrogen storage shall be developed. Here we show that a α−MoO3 thin film, grown via atomic layer deposition, is a material with potential for reversibly storing hydrogen. We found that hydrogen plasma is a convenient way to hydrogenate − at room temperature and relatively low pressures (200 mTorr) – layered α−MoO3 thin films. Hydrogen has been shown to locate itself in the van der Waals gap along the [010] oriented α−MoO3 film. The hydrogen absorption process has been found to be totally reversible, with desorption of hydrogen effective at 350 °C / 4 hours under nitrogen atmosphere, and recoverable after repeated cycles. Furthermore, a nominal 13 nm AlxOy capping layer, grown via atomic layer deposition, has been shown to be efficient in preventing hydrogen release. The volumetric hydrogen storage capacity of 28 kg.m−3 achieved in our films is comparable to that of pressurised steel cylinders, highlighting their potential for practical applications. Our essay could be a starting point to a transition from conventional (gas and liquid) to more advantageous solid-state hydrogen storage materials.