Unlike uniform linear arrays (ULAs), coprime arrays require fewer physical sensors yet provide higher degrees of freedom (DOF) and larger array apertures. However, due to the existence of “holes” in the differential co-array, the target detection performance deteriorates, especially in adaptive beamforming. To address these challenges, this paper proposes an efficient and robust adaptive beamforming algorithm leveraging coprime array interpolation. The algorithm eliminates unwanted signals and uses the Gauss–Legendre quadrature method to reconstruct an Interference-plus-Noise Covariance Matrix (INCM), thereby obtaining the beamforming coefficients. Unlike previous techniques, we utilize a virtual interpolated ULA to expand the aperture, enabling the acquisition of a high-dimensional covariance matrix. Additionally, a projection matrix is constructed to eliminate unwanted signals from the received data, greatly enhancing the accuracy of INCM reconstruction. To address the high computational complexity of integral operations used in most INCM reconstruction algorithms, we propose an approximation based on the Gauss–Legendre quadrature, which reduces the computational load while maintaining accuracy. This algorithm avoids the array aperture loss caused by using only the ULA segment in the difference co-array and improves the accuracy of INCM reconstruction. Simulation and experimental results show that the performance of the proposed algorithm is superior to the compared beamformers and is closer to the optimal beamformer in various scenarios.

The transmit/receive-receive (T/R-R) synergetic High Frequency Surface Wave Radar (HFSWR) has increasingly attracted attention due to its high localization accuracy, but multi-target pairing needs to be performed before localization in multi-target scenarios. However, existing multi-target parameter matching methods have primarily focused on track association, which falls under the category of information-level fusion techniques, with few methods based on detected points. In this paper, we propose a multi-target pairing method with high computational efficiency based on angle information for T/R-R synergetic HFSWR. To be more specific, a dual-receiving array signal model under long baseline condition is firstly constructed. Then, the amplitude and phase differences of the same target reaching two subarrays are calculated to establish the cross-correlation matrix. Subsequently, in order to extract the rotation factor matrices containing pairing information and improve angle estimation performance, we utilize the conjugate symmetry properties of the uniform linear array (ULA) manifold matrix for generalized virtual aperture extension. Ultimately, azimuths estimation and multi-target pairing are accomplished by combining the propagator method (PM) and the ESPRIT algorithm. The proposed method relies solely on angle information for multi-target pairing and leverages the rotational invariance property of Vandermonde matrices to avoid peak searching or iterations, making it computationally efficient. Furthermore, the proposed method maintains superb performance regardless of whether the spatial angles are widely separated or very close. Simulation results validate the effectiveness of the proposed method.

UAV-mounted arrays are highly sensitive to pointing/attitude jitter, which induces steering-vector mismatch and can severely degrade minimum-variance beamformers under strong interference and limited snapshots. This letter presents a robust design that couples self-centered interference-plus-noise covariance matrix (INCM) reconstruction with derivative-constrained minimum variance distortionless response (MVDR) beamforming. A short local Capon scan provides a data-driven drift-aligned direction, and the INCM is reconstructed by integrating a regularized, noise-floor-subtracted Capon spectrum over the field of view while excluding a neighborhood around the self-centered direction to suppress desired-signal leakage. Based on the reconstructed INCM, we solve a derivative-constrained MVDR problem with a white-noise-gain (WNG) bound to limit mainlobe variation within the jitter neighborhood and prevent excessive noise amplification. The resulting design is formulated as a convex second-order cone program (SOCP). Simulations show consistent output-SINR gains over worst-case robust MVDR and representative covariance-reconstruction baselines across SNR sweeps, increasing jitter levels, snapshot-limited regimes, and varying interference conditions.