All-fiber single-transverse-mode laser oscillators operating at 785 nm were demonstrated by splicing a 0.1 mol% Tm 3+ -doped fluoride fiber with a core diameter of 4 μm and a numerical aperture of 0.07 to a pair of silica fiber Bragg gratings. About 500 mW of continuous-wave single transverse mode laser output at 784.5 nm with a 3-dB spectral bandwidth of 0.2 nm was obtained by upconversion pumping a 3-m-long gain fiber at 1125 nm. Our experiments show that the ground-state absorption of Tm 3+ at 785 nm is the origin of low efficiency in previous reports. The efficiency of this all-fiber laser can be improved by using a gain fiber with an optimized overlap between the laser, the pump, and the fiber core, and employing new pumping schemes that deplete the ground state sufficiently.
Nonsilica oxide glasses have been developed and studied for many years as promising alternatives to the most used silica glass for the development of optical fiber lasers with unique characteristics. Their main properties and compositions, alongside the optical fiber fabrication principle, have been previously reviewed in part I. This chapter will review the development of optical fiber lasers operating in the infrared wavelength region based on nonsilica glass fiber materials, either phosphate, germanate or tellurite.
All fiber laser with about 0.5W continuous-wave single transverse mode obtained with 0.1 %mol 3-m thulium doped fluoride fiber. Ytterbium doped fiber laser at 1125 nm was used as the pump source.
Nonsilica oxide glasses have been developed and studied for many years as promising alternatives to the most used silica glass for the development of optical fiber lasers with unique features and properties. Depending on the glass former of choice, these glasses can offer very distinctive physical properties if compared to silica-based glasses. With regard to the development of photonic fiber devices, these key properties include low phonon energy, high rare-earth ion solubility, high optical nonlinearity and easy handling procedures. This chapter, part I of a detailed study concerning nonsilica oxide glass–based optical fiber laser sources, reviews the main properties of three different nonsilica oxide glass families, namely phosphate, germanate and tellurite. The manufacturing process of an optical fiber using these glass materials is also discussed in Section 3 of this chapter.
A stable dual-wavelength Tm:Ho co-doped fiber laser operating above 2 μm based on cascaded single mode-multimode-single mode (SMS) all-fiber structures has been proposed and experimentally demonstrated for the first time.