Zhengcun Zhou

Zhengcun Zhou


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019 in Acta Physica Sinica
Verified
Journal Article
Open access
PDF file
ZZZhengcun Zhou
Zhengcun Zhou
JDJie Du
Jie Du
XZXiao-Bin Zhu
Xiao-Bin Zhu
YYYong-Jian Yan
Yong-Jian Yan
XWXing-Fu Wang
Xing-Fu Wang
用粉末冶金方法制备了不同Nb含量的Ti-Nb合金. 用美国TA仪器公司的动力学分析仪Q800以单臂振动模式研究了不同Nb含量和不同热处理以及不同测量参数下的Ti-Nb合金的内耗行为, 用X-射线衍射检测了不同样品的微观结构. 实验表明, 在水淬的和烧结态的Ti-Nb合金的内耗-温度曲线上均发现了弛豫型的内耗峰, 这个内耗峰的高度与Nb含量有关, 在低Nb含量的Ti-Nb合金样品中不出现, 水淬样品内耗峰的最大值出现在Ti-35.4 wt.%Nb (以下称Ti-35.4Nb)的合金中, 烧结态样品的内耗峰高度在实验成分范围内单调地随Nb含量而增加. 水淬的Ti-35.4Nb合金的弛豫参数分别是激活能Hwq = (1.67 ± 0.1) eV和指数前因子τ0wq = 1.1 × 10-17 ± 1 s. 另外, 内耗峰的高度也与热处理有关, 水淬的Ti-35.4Nb合金比具有相同成分的烧结态的合金的内耗峰高得多, 淬火温度对内耗峰高度也有影响. 研究发现, 这个内耗峰与Ti-Nb合金中的β相有关, 峰高取决于β相的稳定性及其含量, 当β相的稳定性降低以及β相的量增加时, 峰高增加. 水淬Ti-35.4Nb合金中的β相是亚稳状态的β相(βM), 时效时βM能转变成稳定的α相和稳定β相(βS), 烧结态合金中的β相是βS. 不同热处理状态下Ti-35.4Nb合金样品的微观结构的不同导致了内耗峰高度的差别. 从微观结构分析, 在淬火的合金中, 峰高最大值出现在35 wt.% Nb含量附近的现象是由β相的稳定性和βM相的量随Nb含量变化引起的. 在烧结态的Ti-Nb合金中, 峰高单调地随Nb含量的增加而增加的情况是由βS的量决定的. 在循环应力作用下, βM或βS相晶格点阵中氧原子的跳动和氧原子与替代原子的相互作用是产生内耗峰的根源.

29 August 2024 in Physica Scripta
Verified
Journal Article
Closed access
XZXiaobin Zhu
Xiaobin Zhu
ZZZhengcun Zhou
Zhengcun Zhou
XLXu Liu
Xu Liu
YYYifei Yang
Yifei Yang
Compared with the bulk g-C3N4, g-C3N4 nanosheets have the advantages such as larger specific surface area and more active sites, making them more promising in optoelectronic applications. However, the current methods for preparing g-C3N4 nanosheets have some disadvantages such as low yield, long exfoliation time and high energy consumption. Herein, a two-step mechanochemical method combining wet ball milling with ultrasonic-ball milling has been proposed, with a high yield of up to 31.8% for suspensible g-C3N4 nanosheets. Adding YSZ balls during the ultrasound process can effectively improve the cutting efficiency of the g-C3N4 sheets, thereby increasing the yield of the suspensible nanosheets. The stability of g-C3N4 suspensions were relatively high, and the concentration of the suspensions remained above 87% after standing 24 h. The spectra of the nanosheets obtained through the two-step process had a single emission peak of 435 nm, which was suitable for photoluminescence detection.

1 October 2024
Verified
Book Chapter
Closed access
PDF file
ZZZhengcun Zhou
Zhengcun Zhou
HXHuang Xiaohong
Huang Xiaohong
DZDeng Zhike
Deng Zhike