The development of novel structural materials with increasing mechanical requirements is a very resource-intense process if conventional methods are used. While there are high-throughput methods for the development of functional materials, this is not the case for structural materials. Their mechanical properties are determined by their microstructure, so that increased sample volumes are needed. Furthermore, new short-time characterization techniques are required for individual samples which do not necessarily measure the desired material properties, but descriptors which can later be mapped on material properties. While universal micro-hardness testing is being commonly used, it is limited in its capability to measure sample volumes which contain a characteristic microstructure. We propose to use alternative and fast deformation techniques for spherical micro-samples in combination with classical characterization techniques such as XRD, DSC or micro magnetic methods, which deliver descriptors for the microstructural state.
The separation of microparticles with respect to different properties such as size and material is a research field of great interest. Dielectrophoresis, a phenomenon that is capable of addressing multiple particle properties at once, can be used to perform a chromatographic separation. However, the selectivity of current dielectrophoretic particle chromatography (DPC) techniques is limited. Here, we show a new approach for DPC based on differences in the dielectrophoretic mobilities and the crossover frequencies of polystyrene particles. Both differences are addressed by modulating the frequency of the electric field to generate positive and negative dielectrophoretic movement to achieve multiple trap-and-release cycles of the particles. A chromatographic separation of different particle sizes revealed the voltage dependency of this method. Additionally, we showed the frequency bandwidth influence on separation using one example. The DPC method developed was tested with model particles, but offers possibilities to separate a broad range of plastic and metal microparticles or cells and to overcome currently existing limitations in selectivity.
Dielectrophoresis (DEP) enables continuous and label-free separation of (bio)microparticles with high sensitivity and selectivity, whereas the low throughput issue greatly confines its clinical application. Herein, we report a novel design of the DEP separator embedded with cylindrical interdigitated electrodes that incorporate hybrid floating electrode layout for (bio)microparticle separation at favorable throughput. To better predict microparticle trajectory in the scaled-up DEP platform, a theoretical model based on coupling of electrostatic, fluid and temperature fields is established, in which the effects of Joule heating-induced electrothermal and buoyancy flows on particles are considered. Size-based fractionation of polystyrene microspheres and dielectric properties-based isolation of MDA-MB-231 from blood cells are numerically realized, respectively, by the proposed separator with sample throughputs up to 2.6 mL/min. Notably, the induced flows can promote DEP discrimination of heterogeneous cells. This work provides a reference on tailoring design of enlarged DEP platforms for highly efficient separation of (bio)samples at high throughput.
A high-throughput method for the discovery of structural materials requires a large number of samples with highly reproducible properties. We propose using spherical micro-samples, which can be quickly produced by molten metal single droplet processes with high geometrical reproducibility. However, geometrical reproducibility does not automatically yield in the reproducibility of specific properties that are governed by the microstructure and thermal history of the samples. This work evaluates the reproducibility of two different steels (AISI D3 and 5140) in their as-synthesized state without additional heat treatment. By determining a set of well-established high-throughput descriptors by electrochemical analysis, particle-oriented peening, and micro machining, we show that high reproducibility can be achieved. Additionally, the determined properties correlate well with their austenitic (AISI D3) and martensitic (AISI5140) state. The AISI D3 shows an improved corrosion resistance, increased cutting forces during machining, and a higher deformation during particle-oriented peening. The reproducibility of the sample synthesis indicates that this type of sample is well suited for high-throughput methods to find new structural materials.
Separation and classification are important operations in particle technology, but they are still limited in terms of suspended particles in the micrometer and nanometer size-range. Electrical fields can be beneficial for sorting such particles according to material properties. A mechanism based on strong and inhomogeneous fields is dielectrophoresis (DEP). It can be used to separate microparticles according to their material properties, such as conductivity and permittivity, by selectively trapping one particle type while the other can pass the separator. Conventional DEP-separators show either a limitation in throughput or frequency bandwidth. A low throughput limits the economical feasibility in many cases. A lower frequency bandwidth limits the variety of materials that can be sorted by DEP. To separate semiconducting particles from a mixture containing particles with higher conductivity according to their material, high frequencies are required. Possible applications are the separation of semiconducting and metallic carbon nanotubes or the separation of carbon-coated lithium iron phosphate particles from graphite in the recycling process of spent lithium-ion batteries. In this publication, we aim to display how to tune the electrical impedance of a high-throughput DEP separator based on custom-designed printed circuit boards to increase its frequency bandwidth. By adding inductors to the electrical circuit, we were able to increase the frequency bandwidth from 500 kHz to over 11 MHz. The experiments in this study act as proof-of-principle. Furthermore, a non-deterministic way to increase the impedance of the setup is shown, yielding a maximum frequency of 39.16 MHz.
The development of highly selective separation processes is a focus of current research. In 2016, the German Science Foundation funded a priority program SPP 2045 “MehrDimPart—highly specific multidimensional fractionation of fine particles with technical relevance” that aims to develop new or enhance existing approaches for the separation of nano- and micrometer-sized particles. Dielectrophoretic separators achieve highly selective separations of (bio-)particles in microfluidic devices or can handle large quantities when non-selective separation is sufficient. Recently, separator designs were developed that aim to combine a high throughput and high selectivity. Here, we summarize the development from a microfluidic fast chromatographic separation via frequency modulated dielectrophoretic particle chromatography (DPC) toward a macrofluidic high throughput separation. Further, we provide a starting point for future work by providing new experimental data demonstrating for the first time the trapping of 200 nm polystyrene particles in a dielectrophoretic high-throughput separator that uses printed circuit boards as alternatives for expensive electrode arrays.