Adsorption equilibrium and kinetics of CO2, H2 and CH4 on zeolite 13 X were carried out using the volumetric method. The zeolite 13 X was characterized via XRD, SEM and N2 adsorption-desorption. Adsorption isotherms of various gas were investigated over a full range of temperatures at 298, 308 and 313 K. Langmuir's equilibrium model and the heat of adsorption was used to correlate the adsorption isotherms over a wide range of pressure. A classical micropore diffusion approach was applied to investigate the kinetic adsorption. At 298 K, the selectivity of CO2/H2 and CO2/CH4 of the zeolite 13 X was 16.52 and 62.61, respectively. However, zeolite 13 X is one of the most suitable adsorbents for CO2 and CH4 storage, since it has a very high adsorption capacity for both gases. The influence of gas pressure on diffusivity for various absorber-adsorbent systems has been examined. The adsorption experiments with gas mixtures such as H2, CO2 and CH4 on 13 X zeolite show that this adsorbent has potential application in the gas separation and purification process.
The rising concentration of atmospheric CO₂ is a major driver of climate change, necessitating the development of efficient carbon capture technologies. This study quantitatively investigates the surface buildup and multilayer adsorption behavior of CO₂ on activated carbon (AC) using a probabilistic modeling framework in conjunction with adsorption experiments. Key parameters analyzed include the number of adsorption layers, adhesion energy (ΔEa), internal energy (Eint), and void density (DM). Results reveal that CO₂ adsorption on AC forms three to four distinct layers under optimal pressure and temperature conditions, with elevated temperatures reducing the number of layers due to increased interaction energy. The process is characterized as exothermic physisorption (ΔEa: 23.08–23.78 kJ/mol) with no evidence of chemical bonding. Multilayer adsorption effectively compensates for AC’s high density of active sites, thereby enhancing CO₂ capture efficiency. These insights advance the understanding of CO₂ sorption mechanisms on heterogeneous surfaces and guide the design of more thermally stable and efficient carbon capture materials.
In this study, activated carbon (AC) derived from olive waste was employed as an alternative adsorbent for the removal of methylene blue (MB) from aqueous solutions. The AC was characterized using FTIR, SEM, XRD and N₂ adsorption–desorption analyses. The pseudo-second-order kinetic model and the Langmuir adsorption isotherm provided a good fit to the experimental data at 298, 303, and 313 K. A multilayer adsorption model was applied to elucidate the adsorption mechanisms between the dye molecules and the adsorbent. The number of MB active sites (n) was greater than unity at all temperatures, indicating a vertical orientation of the adsorbed molecules. The number of active sites (Dm) showed only slight variation with temperature. The decrease in MB adsorption capacities (Qm) from 235.21 to 198.62 mg·g⁻1 over the temperature range of 298–313 K was primarily influenced by the n parameter. Adsorption energy analysis revealed that MB adsorption was exothermic and occurred via a physisorption process. This study provides valuable insights into the interactions between MB molecules and AC active sites.
The aim of this paper was to study CO2 adsorption on the activated carbon (AC) prepared from olive waste. The AC was characterized via X-ray diffraction, Scanning Electron Microscopy (SEM) and N2 adsorption-desorption. The adsorption isotherms were measured at various temperatures, namely, 298 K, 308 K, and 318 K. Based on the experimental result, a new model was generated and evaluated by means of a multilayer model with saturation. The physicochemical properties that characterize the CO2 adsorption mechanism have been established using a physical statistical approach. The parameters which characterize the CO2 adsorption isotherm, such as the number of carbon dioxide molecules per site (n), the receptor site densities \(\:\left({D}_{m}\right)\:\), and the energetic parameters (ΔE1, ΔE2) were studied. In addition, thermodynamic functions such as internal energy (Eint) and Gibbs free energy (G), were established using a physics model. Thus, the obtained results indicated that the CO2 adsorption on the AC was exothermic and physisorption in nature. Furthermore, the results achieved with this model can be used to design and optimize an adsorption unit for CO2 capture.
This paper investigates the truncated M-fractional Akbota equation via the application of Jacobi elliptic function expansion approach. Akbota is an integra
The aim of this study was to investigate CO₂ adsorption on ZSM-5 zeolite. The adsorbent was characterized using X-ray diffraction (XRD), nitrogen adsorption-desorption isotherms, and scanning electron microscopy (SEM). The correlation coefficients (R²) obtained from the isotherm models indicate that the classical Langmuir model provides a good fit to the experimental data across different temperatures. In addition, the physicochemical parameters of the advanced multilayer model were examined in detail. Key isotherm parameters, including the number of CO₂ molecules per site (n), receptor site density (Dm), and energy parameters (ΔE₁ and ΔE₂), were also analyzed. The results suggest that CO₂ adsorption on ZSM-5 is spontaneous, exothermic, and governed by physisorption. Overall, the model outcomes can be applied to the design and optimization of a pilot-scale CO₂ adsorption system.