This review presents the interfacial properties and behavior of gallium-based liquid metals (GaLMs) in various environments and application examples based on them.

Herein, we present the imbibition-induced, spontaneous, and selective wetting characteristics of gallium-based liquid metal alloys on a metallized surface with micro-scale topographical features. Gallium-based liquid metal alloys are fascinating materials that have enormous surface tension; therefore, they are difficult to pattern into films. The complete wetting of eutectic alloy of gallium and indium is realized on microstructured copper surfaces in the presence of HCl vapor, which removes the native oxide from the liquid metal alloy. This wetting is numerically explained based on the Wenzel’s model and imbibition process, revealing that the dimensions of the microstructures are critical for effective imbibition-driven wetting of the liquid metal. Further, we demonstrate that the spontaneous wetting of the liquid metal can be directed selectively along the microstructured region on the metallic surface to create patterns. This simple process enables the uniform coating and patterning of the liquid metal over large areas without an external force or complex processing. We demonstrate that the liquid metal-patterned substrates maintain electrical connection even in a stretched state and after repetitive stretching cycles.

Microbubbles and nanobubbles (MNBs) can be prepared using various shells, such as phospholipids, polymers, proteins, and surfactants. MNBs contain gas cores due to which they are echogenic and can be used as contrast agents for ultrasonic and photoacoustic imaging. These bubbles can be engineered in various sizes as vehicles for gas and drug delivery applications with novel properties and flexible structures. Hypoxic areas in tumors develop owing to an imbalance of oxygen supply and demand. In tumors, hypoxic regions have shown more resistance to chemotherapy, radiotherapy, and photodynamic therapies. The efficacy of photodynamic therapy depends on the effective accumulation of photosensitizer drug in tumors and the availability of oxygen in the tumor to generate reactive oxygen species. MNBs have been shown to reverse hypoxic conditions, degradation of hypoxia inducible factor 1α protein, and increase tissue oxygen levels. This review summarizes the synthesis methods and shell compositions of micro/nanobubbles and methods deployed for oxygen delivery. Methods of functionalization of MNBs, their ability to deliver oxygen and drugs, incorporation of photosensitizers and potential application of photo-triggered theranostics, have also been discussed.

Due to their low cost, facile fabrication, and high-power conversion efficiency (PCE), dye-sensitized solar cells (DSSCs) have attracted much attention. Ruthenium (Ru) complex dyes and organic solvent-based electrolytes are typically used in high-efficiency DSSCs. However, Ru dyes are expensive and require a complex synthesis process. Organic solvents are toxic, environmentally hazardous, and explosive, and can cause leakage problems due to their low surface tension. This review summarizes and discusses previous works to replace them with natural dyes and water-based electrolytes to fabricate low-cost, safe, biocompatible, and environmentally friendly DSSCs. Although the performance of “eco-friendly DSSCs” remains less than 1%, continuous efforts to improve the PCE can accelerate the development of more practical devices, such as designing novel redox couples and photosensitizers, interfacial engineering of photoanodes and electrolytes, and biomimetic approaches inspired by natural systems.