When the solar-storage DC microgrid operates in islanded mode, the battery needs to stabilize the bus voltage and keep the state of charge (SOC) balanced in order to extend the service life of the battery and the islanded operation time. When there are multiple energy storage units in the DC microgrid, it is necessary to solve the problem of unbalanced circulation and the state of charge between batteries using a reasonable droop control method. In this paper, firstly, the DC–DC charging and discharging circuit of the battery is designed, and the unbalanced SOC of the battery caused by the different impedances of the line is analyzed. Secondly, an adaptive droop control method is proposed to solve the problems of SOC imbalance and current circulation between the batteries. Thirdly, based on MATLAB/SIMULINK R2021b simulation software, the proposed control method is modeled and simulated. Compared with the traditional droop control, the effectiveness of the proposed method is validated.
In order to enhance the carbon emission reduction capability and economy of the microgrid, a capacity optimization configuration method considering laddered carbon trading and demand response is proposed for a grid-connected microgrid consisting of photovoltaic, battery and hydrogen storage devices. Combined with the mathematical model and system structure of each unit in the microgrid, the integrated operation control strategy is determined in this paper. A demand response model containing three load types is developed to reduce the stress on the storage and generation side. A carbon-trading mechanism is introduced into the operating costs to establish a configuration model with annual overall profit and power supply reliability as the optimization objectives. The non-dominated sorting genetic algorithm II is used to optimize the capacity of each unit, and the effectiveness of this model is verified by taking a microgrid in a region in Northwest China as an example to analyze the impacts of ladder carbon trading and demand response on the configuration results and system operation.
Planar perovskite solar cells (PSCs), as a promising photovoltaic technology, have been extensively studied, with strong expectations for commercialization. Improving the power conversion efficiency (PCE) of PSCs is necessary to accelerate their practical application, in which the electron transport layer (ETL) plays a key part. Herein, a single-anchored ligand of phenylphosphonic acid (PPA) is utilized to regulate the chemical bath deposition of a TiO2 ETL, further improving the PCE of planar PSCs. The PPA possesses a steric benzene ring and a phosphoric acid group, which can inhibit the particle aggregation of the TiO2 film through steric hindrance, leading to optimized interface (ETL/perovskite) contact. In addition, the incorporated PPA can induce the upshift of the Fermi-level of the TiO2 film, which is beneficial for interfacial electron transport. As a consequence, the PSCs with PPA-TiO2 achieve a PCE of 24.83%, which is higher than that (24.21%) of PSCs with TiO2. In addition, the unencapsulated PSCs with PPA-TiO2 also exhibit enhanced stability when stored in ambient conditions.