Terephthalate-intercalated nickel–aluminum layered double hydroxides (LDHs) were prepared by a co-precipitation method, with nominal x values in the general formula Ni(1−x)Alx(OH)2(C8H4O4)x/2 in the range 0.3–0.8. The materials were characterized by X-ray diffraction, X-ray fluorescence spectroscopy, CHN analysis, thermogravimetric analysis, FTIR spectroscopy, EXAFS at the Ni edge and 27Al NMR spectroscopy. A combination of XRD, XRF and CHN analysis indicated that crystalline LDHs with true x values up to 0.5 were obtained, along with increasing segregation of an aluminum hydroxide phase with increasing aluminum content. The EXAFS analysis indicated an upper limit of ca. 0.6 for the atomic fraction of aluminum at the second nickel coordination sphere. The 27Al NMR analysis suggested that a phase containing octahedrally co-ordinated Al3+ is segregated for nominal x values from 0.6 upwards.
The pyrolysis of vegetable oil waste is an alternative way to convert biomass into high-quality second-generation biofuels, with social, economic and environmental sustainability. The present work deals with the pyrolysis of oleic acid as a model compound and an industrial vegetable oil residue on CuNiAl mixed oxide catalysts, derived from layered double hydroxides. Reactions of the oils pre-adsorbed on the catalysts (catalyst:oil mass ratio of 5:1) were performed at 550 °C on a micro-pyrolysis system and the analyses of volatile products were carried out online using GC/MS. Copper addition to NiAl catalysts increased the cracking of oleic acid. Increasing copper content also decreased the formation of aromatics and coke precursors, as well as oxygenated compounds. The CuNiAl catalyst with a Cu/Ni ratio of 0.4 showed strong catalytic activity in the conversion of an industrial vegetable oil residue with a high volume of free fatty acids produced. Compared to the non-catalytic reaction, the catalyst reduced the content of oxygenates and increased the content of hydrocarbons, particularly in the gasoline range (C5–C9). The CuNiAl oxide catalyst was able to convert vegetable oil residues into hydrocarbons in the range of gasoline, kerosene and diesel, and also linear alkylbenzenes as chemical precursors for surfactant production.