Magnetic-resonant wireless power transfer (WPT) has become a reliable contactless source of power for a wide range of applications. WPT spans different power levels ranging from low-power implantable devices up to high-power electric vehicles (EV) battery charging. The transmission range and efficiency of WPT have been reasonably enhanced by resonating the transmitter and receiver coils at a common frequency. Nevertheless, matching between resonance in the transmitter and receiver is quite cumbersome, particularly in single-transmitter multi-receiver systems. The resonance frequency in transmitter and receiver tank circuits has to be perfectly matched, otherwise power transfer capability is greatly degraded. This paper discusses the mistuning effect of parallel-compensated receivers, and thereof a novel dynamic frequency tuning method and related circuit topology and control is proposed and characterized in the system application. The proposed method is based on the concept of switch-mode gyrator emulating variable lossless inductors oriented to enable self-tunability in WPT receivers.
Magnetic resonance wireless power transfer (WPT) is a very promising technology for a wide range of applications. The transmission range and efficiency of wireless power transfer have been reasonably enhanced by resonating transmitter and receiver coil at a common frequency. The transmitter and receiver sides have to be perfectly tuned, otherwise power transfer capability is greatly reduced. This paper discusses the detuning effect of parallel compensated receivers, and thereof a novel self-tuning method and related circuit topology and control is proposed and characterized in the system application. The proposed method is based on the concept of switch-mode gyrator emulating variable lossless inductors oriented to enable self-tunability in WPT receivers.
This paper introduces the concept of switch-mode tunable emulated reactive networks. The idea of implementing reactive networks based on the theory of gyrators is proposed and characterized in an application-driven design-oriented context. By means of using switch-mode power processing converters to synthesize gyrators, small capacitors or inductors are effectively multiplied to emulate larger ideally lossless reactive elements. The proposed idea enables to electronically tune the values of reactive elements by means of timing control variables. The proposed tunable reactive networks target many potential applications such as tunable-front-ends for energy harvesting, electronic compensating active power filters, and tunable-front-ends for wireless power transfer links.
This work presents the emulation of tunable switch-mode inductive elements for power converters applications. Such elements are based on the concept of ideal loss-free realization by means of switch-mode circuits. A gyrator-based approach for synthesizing inductors is demonstrated. The value of the emulated inductance could be tuned by using appropriate control which would help to alleviate common undesirable properties of conventional passive implementations such as tolerance and value change over temperature and time. This approach enables monolithic circuits composed of semiconductor devices and small inductors/capacitors to be used to emulate large reactive components as a step forward for enhanced power converter miniaturization and integration.
Due to the functionality increase of modern battery-powered portable devices such as PDAs, smart phones, and notebooks etc., the battery life is an important issue. An efficient voltage regulator (VR) is a must if we need to extend the battery life. For this purpose, this paper discusses the employment of two-stage architecture on the design of point-of-load (POL) Dc-Dc converters. At first, the paper discusses the benefits of replacing the conventional one-stage buck converter by an integrated two-stage step-down converter. The design aspects of a two-stage 6V-to-1V converter are shown as an example to clarify the benefits of the design over one-stage approach. The results show that efficiency of two-stage converter is higher than the one-stage approach in addition to size and cost reduction. Then, the benefits of replacing boost converters by integrated two-stage step-up converters are discussed followed by a design example for two-stage step-up converter from 3.6V-to-12V. The results show that the two-stage approach increases the efficiency of the converter in addition to the benefits from stability point of view.