The corrosion of carbon steel in 1 N HCl was analyzed using an aqueous Bauhinia acuminata Linn (BaL) leaf extract. Weight loss method was used to determine the inhibitor efficaciousness and corrosion rate. When dissolved in water, a linneus plant leaf extract exhibit an inhibitory effect which is proportionate to the amount of inhibitors present. It is possible to speed up the corrosion process by increasing the inhibitors’ concentration. Studies have shown that the BaL leaves extract has a 97.30% inhibitory efficiency. By increasing the concentration of inhibitor solutions, a surface layer forms on carbon steel, which inhibits the activity of the active site. The potentiodynamic polarization (PDP) and AC impedance studies (EIS) were employed to examine the mechanical properties of corrosion inhibition. The surface homogeneity and irregularity of carbon steel were examined using AFM and SEM under polished, corroded and inhibitor-treated surfaces. The surface irregularity of the carbon steel were analyzed using atomic force microscopy.
Adsorbents based on carbonaceous materials, polymers, clays, and inorganic materials are common in the literature, but adsorbents designed from organic materials such as self-assembled heterocyclic compounds have not been studied so far. In this study, a new adsorbent pyrimidone derivative (DHPM) was synthesised employing a green protocol to tone down the cationic dye Methylene Blue (MB) from aqueous solution. The synthesised self-assembled bio-inspired molecules is characterized using Ultraviolet Spectroscopy (UV-Vis), Fourier transform infrared (FT-IR), 1H NMR & 13C NMR and Thermogravimetric analysis (TGA). The self-assembled molecule's propensity to adsorb MB dye was investigated as a function of MB concentration, time, temperature, pH and adsorbent dosage. The enhancement of adsorption capability over the cationic dye has been discussed in this script. A detailed examination of the adsorption kinetics revealed that the study conforms to pseudo-second-order model. Isothermal adsorption study over the MB dye were used with several models. Langmuir-Freundlich model was found to be the most accurate, with an adsorption capacity of 233.99 mg/g. The results are endothermic and spontaneous for the thermodynamic study of adsorption over MB dye onto the pyrimidone derivative.