While the consistent advance in computational power has enabled the Computational Fluid Dynamics (CFD) an effective tool for compressor performance characterization, the need for quick performance estimates at initial design phase of compressor still requires the use of low order models. Thus, the throughflow method remains the backbone of compressors design process. The accuracy of the throughflow calculation mainly depends on the adopted empirical correlations. However, the traditional empirical models are just accurate for the conventionally loaded compressor at normal working conditions. In this article, the mechanism of blade profile loss generation and the formation mode of existing empirical correlation are studied, and the reason why the traditional diffusion factor based empirical models are not applicable for modern high-loading compressors or conventional-loading blades at negative incidence is also discussed. Then, the Genetic Algorithm assisted Back Propagation Neural Network (GA-BPNN) is used to train the surrogate model for the design and off-design loss prediction along the blade span of the compressor. Based on the test data of four transonic compressor stages, a database containing 72 sets of blade element geometry and about 1400 sets of blade element performance data is established. Considering the different mechanisms of rotor and stator losses at different working conditions, the entire database and surrogate model are divided into four components according to the rotor and stator at positive incidence and negative incidence. Comparing the prediction results of the surrogate model with the traditional empirical correlations and experimental data, the results show that the GA-BPNN is an alternative solution for developing the empirical model.
11 March 2021 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
In recent years, the computational fluid dynamics (CFD) techniques have attracted enormous interest in the throughflow calculations, and one of the major concerns in the CFD-based throughflow method is the modeling of blade forces. In this article, a viscous blade force model in the CFD-based throughflow program was proposed to account for the loss generation. The throughflow code is based on the axisymmetric Navier–Stokes equations. The inviscid blade force is determined by calculating a pressure difference between the pressure and suction surfaces, and the viscous blade force is related to the local kinetic energy through a skin friction coefficient. The viscous blade force model was validated by a linear controlled diffusion airfoil cascade, and the results showed that it can correctly introduce the loss into the CFD-based throughflow model. Then, the code was applied to calculate the transonic NASA rotor 67, and the calculated results were in good agreement with the measured results, which showed that the calculated shock losses reduce the dependence of the throughflow calculation on the empirical correlation. Last, the 3.5-stage compressor P&W3S1 at 85%, 100%, and 105% of the design speed was performed to demonstrate the reliability of the viscous blade force model in a multistage environment. The results showed that the CFD-based throughflow method can easily predict the spanwise mixing due to the inclusion of the turbulence model, and predicted results were in acceptable agreement with the experimental results. In a word, the proposed viscous blade force model and CFD-based throughflow model can achieve the throughflow analysis with an acceptable level of accuracy and a little time-consuming.
Throughflow methods have crucial roles in axial compressor design process. Traditional approaches solve radial equilibrium equations on the meridional plane, such as the classical streamline curvature method, which has achieved a degree of efficiency and accuracy. Recently, the numerical scheme borrowed form Computational Fluid Dynamics(CFD) approaches has attracted enormous