Long queues of vehicles are often found at signalized intersections, which increases the energy consumption of all the vehicles involved. This paper proposes an enhanced eco-approach control (EEAC) strategy with consideration of the queue ahead for connected electric vehicles (EVs) at a signalized intersection. The discharge movement of the vehicle queue is predicted by an improved queue discharge prediction method (IQDP), which takes both vehicle and driver dynamics into account. Based on the prediction of the queue, the EEAC strategy is designed with a hierarchical framework: the upper-stage uses dynamic programming to find the general trend of the energy-efficient speed profile, which is followed by the lower-stage model predictive controller to computes the explicit solution for a short horizon with guaranteed safe inter-vehicular distance. Finally, numerical simulations are conducted to demonstrate the energy efficiency improvement of the EEAC strategy. Besides, the effects of the queue prediction accuracy on the performance of the EEAC strategy are also investigated.

The accurate information of sideslip angle (SA) and tire cornering stiffness (TCS) is essential for advanced chassis control systems. However, SA and TCS cannot be directly measured by in-vehicle sensors. Thus, it is a hot topic to estimate SA and TCS with only in-vehicle sensors by an effective estimation method. In this article, we propose a novel fuzzy adaptive robust cubature Kalman filter (FARCKF) to accurately estimate SA and TCS. The model parameters of the FARCKF are dynamically updated using recursive least squares. A Takagi–Sugeno fuzzy system is developed to dynamically adjust the process noise parameter in the FARCKF. Finally, the performance of FARCKF is demonstrated via both simulation and experimental tests. The test results indicate that the estimation accuracy of SA and TCS is higher than that of the existing methods. Specifically, the estimation accuracy of SA is at least improved by more than 48%, while the estimators of TCS are closer to the reference values.