Titanium dioxide (TiO2) photocatalysis can harness the energy from sunlight, providing a solution to many green- and energy-related problems. In this study, we aimed to produce Cu doped TiO2 (Cu-TiO2) structures at a low temperature (~70 °C) under atmospheric pressure based on liquid phase deposition. The products prepared with Cu nitrate exhibited anatase-phase TiO2 with the presence of Cu, and the particles showed a waxberry-like structure. Changing the Cu nitrate concentration allowed control of the atomic concentration; we confirmed ~1.3 atm.% of Cu ions in the product when we applied 10 mM in the precursor solution. By doping Cu, the light absorption edge shifted to 440 nm (~2.9 eV), and we proved the photocatalytic reaction through action spectral measurement. We observed the decomposition of acetaldehyde into CO2 on Cu-TiO2 photocatalysts, which produced optimized improvements in photocatalytic activity at Cu dopant levels between 0.2 and 0.4 atm.%. This study demonstrates that the liquid phase deposition technique can be used for doping metallic ions into TiO2, which shows promise for preparing novel and unique nanomaterials as visible light photocatalysts.
25 September 2023 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
ZnS/ZnO nanocomposites were fabricated by a simple coating method. ZnO thin film (TF) and ZnS nanoparticles were prepared separately by a sputtering technique and wet chemistry approach, respectively. Finally, those were combined together via the spin-coating of ZnS nanoparticles on a ZnO TF. The ZnS/ZnO products were characterized by X-ray diffraction and photoluminescence spectroscopy, which demonstrated the electrical contact between ZnO and ZnS. Compared with ZnS nanoparticles and ZnO TFs, the composite exhibited higher photocatalytic activity toward the decomposition of methylene blue, which could be explained by the separation and transfer of the photoexcited carriers at the contact. Moreover, by applying thermal pre-treatment to ZnO TFs, the crystallinity of the film was observed to be improved, which further enhanced the photocatalysis owing to the longer lifetime of the photoexcited carriers.
The effects of Argon (Ar) on the Synthesis and Photocatalytic activities of monolayer Graphene under the flow of Methane (CH4) and Hydrogen (H2) gas has been studied. The Chemical Vapor Deposition (CVD) method was used to create a large area of monolayer graphene with features that meet the needs of a wide variety of applications. With this, the possibility of varying the dimensions of graphene by differing the argon gas while keeping other parameters constant was demonstrated. This helps with the ability to control the size and number of layers of graphene for different applications. Further, the photocatalytic activities of produced graphene were examined during CVD at various argon gas flow rates to observe their effects on the performances of graphene. The result shows that the synthesized graphene at Ar = 80 sccm is a monolayer with perfectly shaped edges. After exfoliation, the graphene obtained was properly formed with a large surface area, which helped achieve the results of higher photocatalytic activity.