The inherent weakness in the deformation resistance of plastic centrifugal pumps makes them prone to vibrations. This study explores the impact of flow components on the vibrations of such pumps. Utilizing the given parameters, the primary structural parameters of the plastic centrifugal pump were calculated. The study focused on the torsional vibrations within the pump shaft transmission system, employing a silicone oil damper for vibration mitigation. A dual-mass forced torsion vibration model was developed for the pump shaft transmission system with the added damper. The optimal damping coefficient for this damper was determined, and its structural design was completed, including the creation of three-dimensional models and two-dimensional part drawings. Utilizing a ZT-3 type rotor test bench, a mathematical model correlating centrifugal pump speed with deflection was developed, and the effectiveness of various polynomials was assessed. The analysis showed that the optimal damping value for the silicone oil damper is 0.22. Compared to the system without the damper, the vibration frequency reduced by 10.45%, and the vibration amplitude decreased by 49.29%, demonstrating excellent vibration reduction effectiveness.

At present, the design of the pump shaft transmission system mostly refers to the design method of the metal pump transmission system. The dynamic and static characteristics of the plastic centrifugal pump are not related to the structural parameters of the pump shaft. Aiming at the influence of the structural parameters of the pump shaft transmission system on the dynamic and static performance of the plastic centrifugal pump, the three-dimensional model of the impeller and volute chamber was drawn by Creo5.0. The CFD calculation of the load of the plastic centrifugal pump was carried out. The flow field of the plastic centrifugal pump under ideal working conditions was simulated by ANSYS FLUENT. Combined with the application principle of singular function in mechanics, the mathematical model of a deflection of the pump shaft transmission system was constructed. Considering the minimum deflection and the maximum critical speed of the first order as the objective function, an optimization model of the structural parameters of the pump transmission system was established. The NSGA-II multiobjective optimization method was used to solve the optimal structural parameters of the optimization model, and the optimization design of the pump shaft span, cantilever, front, and rear bearing clearance was completed. The optimal span cantilever ratio of the rotor model of the single span cantilever structure was 1:0.75. Compared with the traditional design model, the optimized pump shaft deflection is reduced by 52.35%, and the first-order critical speed is increased by 42.77%. Simultaneously, using polynomial fitting as a mathematical tool, the experimental data were analyzed, and the mathematical expression of the rotation speed deflection relationship of the pump shaft at the first critical rotation speed and the corresponding function curve was obtained.

Because of the influence of the structural parameters of the pump shaft transmission system on the dynamic and static performance of the plastic centrifugal pump, according to the structural parameters of the centrifugal pump, the three-dimensional model of the impeller and volute chamber was drawn. The composition of radial force and axial force generated when the plastic centrifugal pump works were analyzed. The CFD calculation of the load of the plastic centrifugal pump was carried out. The flow field of the plastic centrifugal pump under ideal working conditions was simulated by ANSYS FLUENT. Combined with the application principle of singular function in mechanics, the mathematical model of the deflection of the pump shaft transmission system was constructed. And the key factors affecting the deflection of the pump shaft were analyzed. Taking the minimum deflection and the maximum critical speed of the first order as the objective function, the constraint conditions were determined by the geometric relationship, and the optimization model of the structural parameters of the pump transmission system was established. The NSGA-II multi-objective optimization method was used to solve the optimal structural parameters of the optimization model, and the optimization design of pump shaft span, cantilever, front and rear bearing clearance was completed. The optimal span cantilever ratio of the rotor model of the single-span cantilever structure was 1:0.75. The ZT-3 rotor test device was used as a platform to verify the effect of span and cantilever ratio on the dynamic performance of the rotor.